基于气动效应的特长隧道断面优化探讨

铁路隧道净空面积的确定,不仅应考虑隧道建筑限界和机车车辆限界,还要考虑列车通过隧道时诱发的空气动力学效应。基于一维、可压缩、非定常的流动假设,推导得到车内瞬变压力、洞口微气压波和空气阻力计算公式,并结合这3个指标对现有城际铁路、高速铁路隧道设计规范进行论证和优化。结果表明： 针对大于10 km的特长隧道,在一定长度范围内,且在提高列车密封水平、增加洞口微气压波缓冲结构的情况下,可对特长隧道净空断面进行优化。     

固结黏土地层盾构直接破除排水板关键技术研究

宁波地铁5号线1期下穿高速公路路基时存在68°斜交长40 m的含塑料排水板的固结黏土地层,为研究盾构直接通过可行性、刀具选型、施工参数优化等问题,利用TBM掘进模态综合试验平台,进行了不同类型刀具、不同掘进参数的固结黏土地层排水板破除试验。研究表明： 对于含排水板的固结黏土地层,在合理选择刀具、盾构参数并优化掘进参数情况下,盾构法施工直接破除基本可行,试验为宁波地铁工程建设提供了依据,也可为类似工程设计及施工提供参考。     

Second best toll and capacity optimisation in networks: solution algorithm and policy implications

This paper looks at the first and second best jointly optimal toll and road capacity investment problems from both policy and technical oriented perspectives. On the technical side, the paper investigates the applicability of the constraint cutting algorithm for solving the second best problem under elastic demand which is formulated as a bilevel programming problem. The approach is shown to perform well despite several problems encountered by our previous work in Shepherd and Sumalee (Netw. Spat. Econ., 4(2): 161–179, 2004). The paper then applies the algorithm to a small sized network to investigate the policy implications of the first and second best cases. This policy analysis demonstrates that the joint first best structure is to invest in the most direct routes while reducing capacities elsewhere. Whilst unrealistic this acts as a useful benchmark. The results also show that certain second best policies can achieve a high proportion of the first best benefits while in general generating a revenue surplus. We also show that unless costs of capacity are known to be low then second best tolls will be affected and so should be analysed in conjunction with investments in the network.

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

公路基本建设项目设计阶段工程造价控制

公路工程造价控制,是工程项目管理的重要内容。文章分析了在公路基本建设项目设计阶段控制工程造价的重要性,阐述了设计阶段工程造价控制的必要条件,提出了对公路基本建设项目工程造价进行有效控制的措施。     

多方式多类型交通分配模型(MMA)在收费型公路网中的应用研究

在对收费型公路运营模式进行研究的基础上,利用交通规划软件建立了基于广义费用的交通流量分配模型即多方式多类型交通分配模型,通过对模型参数的科学标定和网络的合理设置,得到各类车型在特定网络上的流量分配、路段饱和率以及通行费用,并对此模型的应用效果进行分析,最终为区域高速公路网规划、路段交通量预测提供依据。     

船舶六自由度转台电液伺服系统参数整定方法

针对船舶六自由度转台电液伺服系统的参数整定问题,提出一种基于多目标遗传算法和多属性决策的PID参数设计方法,综合考虑了系统超调量、稳定时间和ITAE指标,采用多目标遗传算法求出Pareto最优解。使用客观赋权的信息熵法对最优解的属性进行权值计算,然后采用逼近理想解的排序方法（TOP—SIS）进行多属性决策（MADM）研究。计算了转台电液伺服控制的数值算例,结果表明本文提出的联合方法通用性好,所设计的PID性能优异,适合工程实际应用。     

正交异性组合桥面构造优化

正交异性组合桥面由于其较好的抗疲劳性能和静力承载能力、相对较轻的自重近年来在实际工程中得到较多应用。正交异性组合桥面通常由正交异性钢板和混凝土层组成,在加入混凝土层后结构刚度发生较大变化,若正交异性板仍采用传统正交异性钢桥面的构造形式将会造成不必要的钢材用量和焊接量增加。采用遗传算法,以单位面积造价最小为目标,结合现有规范考虑了构造约束和承载能力约束两类约束条件,采用两种应力控制方案,对不同桥面板跨度和混凝土厚度的正交异性组合桥面的构造进行优化。同时解决了构造改变导致荷载分配改变对承载能力分析造成的影响。优化结果表明,桥面跨度4.5m时,与未优化组合桥面相比,优化方案用钢量可降低1.7%~10.1%,焊接量可降低16.5%~31.8%。     

轻型汽油车改装柴油机后发动机悬置系统和冷却系统的优化设计

介绍在原有汽油车底盘的基础上改装柴油机后,发动机悬置系统和冷却系统的优化设计和匹配方法。建立了以发动机悬置系统能量解耦和固有频率为综合目标的优化模型,对悬置系统参数进行了优化。运用相似理论对风扇进行了优选和匹配。     

价值工程在客车研发中的应用

简要介绍价值工程的原理及价值工程在客车成本控制方面的实际应用。