Common underlying steering curves for motorcycles in steady turns

We study the steady turn behaviours of some light motorcycle models on circular paths, using the commercial software package ADAMS-Motorcycle. Steering torque and steering angle are obtained for several path radii and a range of steady forward speeds. For path radii much greater than motorcycle wheelbase, and for all motorcycle parameters including tyre parameters held fixed, dimensional analysis can predict the asymptotic behaviour of steering torque and angle. In particular, steering torque is a function purely of lateral acceleration plus another such function divided by path radius. Of these, the first function is numerically determined, while the second is approximated by an analytically determined constant. Similarly, the steering angle is a function purely of lateral acceleration, plus another such function divided by path radius. Of these, the first is determined numerically while the second is determined analytically. Both predictions are verified through ADAMS simulations for various tyre and geometric parameters. In summary, steady circular motions of a given motorcycle with given tyre parameters can be approximately characterised by just one curve for steering torque and one for steering angle.     

Effective assessment of tyre–road friction coefficient using a hybrid estimator

Vehicle stability and active safety control depend heavily on tyre forces available on each wheel of a vehicle. Since tyre forces are strongly affected by the tyre–road friction coefficient, it is crucial to optimise the use of the adhesion limits of the tyres. This study presents a hybrid method to identify the road friction limitation; it contributes significantly to active vehicle safety. A hybrid estimator is developed based on the three degrees-of-freedom vehicle model, which considers longitudinal, lateral and yaw motions. The proposed hybrid estimator includes two sub-estimators: one is the vehicle state information estimator using the unscented Kalman filter and another is the integrated road friction estimator. By connecting two sub-estimators simultaneously, the proposed algorithm can effectively estimate the road friction coefficient. The performance of the proposed estimation algorithm is validated in CarSim/Matlab co-simulation environment under three different road conditions (high-μ, low-μ and mixed-μ). Simulation results show that the proposed estimator can assess vehicle states and road friction coefficient with good accuracy.     

大型回转起重船技术特点与发展研究

阐述了大型全回转起重船主要应用范围和作业概况,分析了目前世界上大型全回转起重船的技术特点及发展趋势,可为我国海洋石油勘探开发新型、经济实用的海洋工程装备提供决策依据。     

5kNm立式参考式扭矩标准装置研究

本文介绍了5kNm立式参考式扭矩标准装置的结构形式和组成，并详细描述了有关参考式装置的结构设计及有限元分析、扭矩加载系统以及装置的超限保护机构的研究过程和研究成果。通过不确定度评定，装置的扩展不确定度Urel=0.05%（包含因子k=2）。参考式扭矩标准装置以其高性价比和快速校准的特点，满足了广大计量机构扭矩传感器校准的需求。     

永磁同步电机定子槽型对转矩脉动的影响分析

转矩脉动是高性能电机的一个重要指标,转矩脉动的大小,对电机的振动有很大的影响。本文通过研究改变表贴式永磁同步电机定子槽参数来分析转矩脉动的变化,并通过有限元仿真,找出槽参数与转矩脉动的关系,仿真表明,调整槽参数,可以减小转矩脉动,为表贴式永磁电机减小转矩脉动的设计提供参考。     

基于符号回归算法的地铁盾构刀盘扭矩预测研究

为了提高盾构机工作效率、降低施工成本,依托深圳地铁8号线某盾构区间段工程,基于符号回归(Symbolic Regression)算法,对不同掌子面的刀盘扭矩进行了预测。分析了推力、土仓压力以及贯入度变化及换刀对扭矩的影响。结果表明,贯入度增大会导致扭矩增加,但是土仓压力的增加可能会降低扭矩。扭矩模拟数学模型具有较高精度,模型中自变量变动引起因变量变化的趋势与现实情况一致。     

基于Q参数化控制器的无刷直流电机调速系统

提出了一种新的电机调速方法,并将其应用到无刷直流电机的驱动控制中.该驱动系统的所有稳定控制器均可用一个独立的Q参数来描述,由该控制器构成的速度环不仅能消除电机脉动转矩引起的速度波动,同时对其他形式的速度干扰也能进行很好的抑制.仿真结果表明:在系统参数发生变化及存在噪声的情况下,在参考速度和负载转矩发生改变时,本文提出的控制策略都能获得鲁棒稳定性和良好的动态性能.     

永磁同步电动机模糊直接转矩控制的研究

为了提高系统的稳定性和响应速度，将模糊控制技术用于永磁同步电动机控制中，提出了一种新的模糊控制方案．引入零矢量控制，对模糊控制规则进行简化．仿真实验结果表明，与一般直接转距控制相比，模糊直接转距控制的磁链轨迹更接近于圆形；转速能在很短的时间内上升到稳定值；当受到外部干扰时，转距能快速、平稳地变化，达到新的稳态值；电流稳态波形的高频成分大大减少．     

基于连续梁模型的内燃机曲轴载荷计算

以连续梁作为内燃机曲轴的计算模型，以克服简支梁模型由于简化而无法考虑一些较为重要的载荷的缺点，此模型可用于分析曲轴所受轴颈和轴承载荷，任意截面弯矩、扭矩以及这些载荷在一个工作循环中的变化情况。给出了对一种１６缸四冲程Ｖ型柴油机曲轴载荷的算例。     

某V型发动机曲轴结构强度有限元分析及方案比较

利用有限元分析法对某V型发动机曲轴的两种结构方案进行数值模拟,获得曲轴结构的应力大小以及分布情况,考察其结构方案的强度,为发动机的曲轴结构设计提供参考依据.