地铁屏蔽门系统构成分析

文章较详细地介绍了广州地铁使用的屏蔽门系统,重点是它的机械和电气部分的组成和作用.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

复合材料圆柱壳的稳定性及其优化设计

本文分别利用一阶剪切理论和Reddy高阶剪切理论计算了考虑横向剪切变形影响的复合材料层会圆柱壳的线性失稳载荷和几何非线性失稳载荷。分析了壳体的几何参数、铺层数、铺层角、半径厚度比值对失稳临界行值的影响。铺层的优化设计中利用随机试验法与可变容差法相结合，计算了寻求临界行值最大的铺层角最优问题，并利用约束非线性混合离散变量优化程序对铺层角为离散值的情况进行了优化。碳纤维环氧树脂圆柱壳模型试验表明本文计算结果是可靠的。     

集装箱龙门起重机微机控制系统

本文介绍了将微型计算机应用于集装箱起重机自动控制系统的设计思想和方法。在该系统中，以集装箱起重机为控制对象，用单板机作为控制器，通过传感器，驱动放大电路及接口芯片等构成一个完整的自动控制系统。此系统基本实现了集装箱起重机的自动控制，并给集装专用吊具与集装箱迅速准确的自动对位带来好处。     

多值非线性系统的自适应控制

提出了带有多值非线性环节的线性离散系统的自适应控制算法，仿真实验的结果表明：该算法简单易行具有明显的优点，跟踪误差比采用一般的自适应控制算法时要小得多，且能保证闭环系统大范围近收敛。     

远动信息编译码算法实现

本文从远动信息传输需要出发，对运动信息传输格式及其循环冗余校验码的生成算法进行了研究，并对有关算法进行了软件实现。     

增力式多向镦锻装置的研制

在通用压机上生产类似全纤维曲轴一类锻件的先进工艺为多向镦锻法。本文设计的新型增力式多向钮锻装置，在锻造接近结束时，可以增大水平锹粗力，其增力效果超过传统的ＲＲ锻造法及ＴＲ锻造法。     

黄铜管焊缝高温短时退火组织的研究

用光镜对单相黄铜管焊后和冷变形后的焊缝在高温短时退火后的组织进行了研究。结果表明，焊后不经过冷变形的焊缝，退火后组织为粗大的、并垂直于焊缝的条形晶粒和粗大的等轴晶粒；经过冷变形后，焊缝的不同原始组织在退火后都将发生再结晶，影响管坯表面质量的铸造组织消失，组织细化，文中对试验结果进行了分析．