列车运行图可调整度评价系统研究

在详细分析了列车运行图缓冲时间的大小及其分布规律对列车晚点传播影响的基础上，通过建立列车运行图调整系统，对给定晚点程度的列车进行模拟调整，从而计算出列车晚点恢复率，晚点传播区大小，连带晚点时间和关键列车运行线等。指标来达到对列车运行图可高速程度优劣评判的目的。     

需求信息的延迟对牛鞭效应的影响

研究在一个库存环境中,用于未来需求预测的需求信息的延迟对于需求预测的影响.当通过一种补充订货策略控制补货时,这种延迟降低了历史订单信息的波动性,最终减弱了牛鞭效应的影响.     

基于移动导航数据的信号配时反推

在交通管理和评价时,信号配时对监测评价路口运行状态,评价路口配时方案至关重要.但是,大范围的实时信号配时方案的获取尚缺乏简明有效的途径.本文提出两种基于移动导航数据计算固定配时路口信号配时的方法.第一种方法是在不考虑驾驶员驾驶行为差异性时,得到路口红灯和车均延误的关系模型,从而计算某相位的红灯时长.另外一种方法是基于车辆通过停止线的时间,结合本文提出的上升梯度法,得到某阶段红灯时长.本文通过实际的路口案例计算,将预测结果和已知路口的信号配时比较,表明此方法计算得到的红绿灯时长准确度较高,为后续进行路口运行状态和通行能力研究提供了数据支持.     

���ڸ��������ݵ��Ŷӳ��ȼ�ⷽ���о�

排队长度作为评价信号交叉口运行效率的一个重要指标,能有效反映交叉口处的运行状况.传统排队检测模型大多基于线圈检测器,且模型假设过于理想化,本文提出一种面向低采样率浮动车数据、具有良好数据驱动性的信控交叉口在线排队长度检测方法,方法关键在于利用队尾浮动车位置估算最大排队长度.检测过程采用固定时间间隔,主要步骤包括地图匹配、等距划分交叉口进口道并统计停车点数量、判定队尾浮动车的位置、修正得到最大排队长度估计值.实测数据表明,此方法的精度与浮动车比率有直接的关系,在浮动车比率较高的许多主干路交叉口,精度可以达到理想效果,30 m以内的平均绝对误差对高峰期的排队检测依旧具有很大价值.     

A Novel Approach to Vehicle Dynamics using the Theory of a Cosserat Point and its Application to Collision Analyses of Platooning Vehicles

A fully three-dimensional, computationally inexpensive vehicular model is presented. In contrast to traditional rigid body models, the vehicle's sprung mass is modeled as a (nonlinearly) deformable body. The formulation of the equations of motion is based on a continuum theory known as the theory of a Cosserat point. These equations largely preserve the relative simplicity of rigid body dynamics but incorporate deformable features. The ease of computer implementation permits the simultaneous simulation of vehicle and collision dynamics of multiple vehicles and highway objects. In this paper, the theory of a Cosserat point is summarized and its general application to vehicle and collision dynamics is illustrated. A three-dimensional collision algorithm is discussed with emphasis on small closing velocities (negligible residual crush, elastic rebound). The novel model is compared to standard procedures.     

Contents Index Volume 35 and 36

Active safety systems would benefit from tyre force and friction potential information. Different sensor concepts, including, among others, the EU–funded Apollo–project developed tyre sensor based on optical position detection, are being studied. The sensor can measure tyre carcass deflections with respect to the rim. The carcass deflections can be used to calculate tyre forces and they may be exploited in the estimation of friction potential. The waveforms of the sensor signal are illustrated. The vertical and lateral force estimations are presented with unavoidable compensation parts. The tyre sensor measurements were compared to the measurement–vehicle results and good correlations achieved. Continuing activities are concerned with the estimation of friction potential and the detection of aquaplaning.     

A model-based traction control strategy non-reliant on wheel slip information

A traction control system (TCS) for two-wheel-drive vehicles can conveniently be realised by means of slip control. Such a TCS is modified in this paper in order to be applicable to four-wheel-drive vehicles and anti-lock braking systems, where slip information is not readily available. A reference vehicle model is used to estimate the vehicle velocity. The reference model is excited by a saw-tooth signal in order to adapt the slip for maximum tyre traction performance. The model-based TCS is made robust to vehicle modelling errors by extending it with (i) a superimposed loop of tyre static curve gradient control or (ii) a robust switching controller based on a bi-directional saw-tooth excitation signal. The proposed traction control strategies are verified by experiments and computer simulations.     

Observer-based clutch disengagement control during gear shift process of automated manual transmission

A clutch disengagement strategy is proposed for the shift control of automated manual transmissions. The control strategy is based on a drive shaft torque observer. With the estimated drive shaft torque, the clutch can be disengaged as fast as possible without large driveline oscillations, which contributes to the reduction of total shift time and shift shock. The proposed control strategy is tested on a complete powertrain simulation model. It is verified that the system is robust to the variations of driving conditions, such as vehicle mass and road grade. It is also demonstrated that the revised system with switched gain can provide satisfactory performance even under large estimation error of the engine torque.     

轨道交通列车运行延误仿真系统研究

简述了轨道交通列车运行延误仿真系统的基本框架结构;对列车延误模拟分析和运行模拟两个主要模块的模型建立、结构设计、功能实现及算法结构进行了描述.对列车延误仿真的评价指标进行了说明.系统可根据基础设施特点、列车运行组织方案、列车运行图以及列车运行延误的影响等,进行运行组织方案的可靠性、适应性及预期效果的定量分析和评价.     

内置式永磁同步电动机无传感器速度控制和转子初始位置估计方法的应用及实验研究

针对内置式永磁同步电动机传动提出了一种新的无速度传感器控制和转子初始位置估计方法.在内置式永磁同步电动机旋转过程中,采用扩展卡尔曼滤波方法,仅需测量电机定子的电压和电流,便可得到转速和转子位置的估计值.对内置式永磁同步电动机,采用扩展卡尔曼滤波方法的主要困难在于在静止坐标系中其动态模型的复杂性.由于磁路的不对称性,在静止坐标系中建内置式永磁同步电动机的模型比建表面式永磁同步电动机模型更复杂.在无传感器的传动系统中,电机的起动过程是一个问题,因为在起动之前没有任何信息可以获得.转子初始位置估计是在电机静止时,在瞬间对定子绕组施加合适的电压脉冲序列,通过测量峰值电流获得转子位置信息.利用磁饱和效应对凸极性的影响来区分南北磁极.给出基于浮点数字信号处理器TMS320C31平台得到的内置式永磁同步电动机实验结果.