Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

南宁大桥主桥承台混凝土施工质量控制探讨

文章结合南宁大桥主桥承台大体积混凝土施工实例,分析了大体积混凝土产生裂缝的原因,并从承台大体积混凝土施工方案、材料选择、配合比设计、现场浇筑质量控制等方面,介绍了保证承台大体积混凝土施工质量的控制措施以及取得的效果,对类似工程有一定的借鉴作用。     

Driver fatigue: a vision-based approach to automatic diagnosis

In this paper, we describe a system that locates and tracks the eyes of a driver. The purpose of such a system is to perform detection of driver fatigue. By mounting a small camera inside the car, we can monitor the face of the driver and look for eye movements which indicate that the driver is no longer in condition to drive. In such a case, a warning signal should be issued. This paper describes how to find and track the eyes. We also describe a method that can determine if the eyes are open or closed. The primary criterion for this system is that it must be highly non-intrusive. The system must also operate regardless of the texture and the color of the face. It must also be able to handle changing conditions such as changes in light, shadows, reflections, etc. Initial experimental results are very promising even when the driver moves his/her head in a way such that the camera does not have a frontal view of the driver’s face.     

An exact modelling of the uniform control traffic delay in undersaturated signalized intersections

The average delay experienced by vehicles at a signalized intersection defines the level of service (LOS) at which the intersection operates. A major challenge in this regard is the ability to accurately estimate all the components underlying the overall control delay, including the uniform, incremental and initial queue delays. This paper tackles this challenging task by proposing a novel exact model of the uniform control delay component with a view to enhancing the accuracy of the existing approximate models, notably, the one reported in the Highway Capacity Manual 2010. Both graphical and analytical proofs are employed to derive exact closed‐form expressions for the uniform control delay at undersaturated signalized intersections. The high degree of accuracy of the proposed models is analysed through extensive simulations to demonstrate their abilities to exactly characterize the performance of real‐life intersections in terms of the resulting vehicle delay. Unlike the existing widely adopted uniform delay models, which tend to overestimate the LOS of real‐life intersections, the delay models introduced in this paper have the merit of exactly capturing such a LOS. Copyright © 2016 John Wiley & Sons, Ltd.     

The speed control effect of highway tunnel sidewall markings based on color and temporal frequency

The low‐luminance monotonous environment in the middle section of highway tunnels offers few reference points and is prone to cause severe visual illusion. Thus, drivers tend to underestimate their driving speed, which can induce speeding behaviors that result in rear‐end collisions. Therefore, discovering low‐cost methods of traffic engineering that reduce this visual illusion and ensure a steady driving speed is an important challenge for current highway tunnel operations. This study analyzes the effects of sidewall markings in typical highway tunnels, specifically observing how their colors and temporal frequencies affect the driver's speed perception in a low‐luminance condition. A three‐dimensional model of the middle section of highway tunnels was built in a driving simulator. Psychophysical tests of speed perception were carried out by the method of limits. The precision of the simulation model was then checked by comparing the results to field test data. The simulation tests studied the stimulus of subjectively equal speed and reaction time in relation to sidewall markings in different colors (red–white combined, yellow–white combined, and blue–white combined). Furthermore, based on the optimal color, the effects of sidewall marking with different temporal frequencies (0.4, 0.8, 1.2, 2, 4, 8, 12, 16, and 32 Hz) on the speed perception of drivers were also analyzed. The test results reveal that the color and temporal frequency of sidewall marking have a significant impact on the driver's stimulus of subjectively equal speed and reaction time. The subjects have the highest speed overestimation and an easy speed judgment with the red–white combined sidewall marking. Within the temporal frequency range of 4.45–7.01 Hz, the subjects have a certain degree of speed overestimation (less than 20%), and the speed perception is sensitive to the temporal frequency changes. Copyright © 2016 John Wiley & Sons, Ltd.     

从河床冲淤分析沉管法修建长江水下隧道问题

文章从三峡水库泥沙入库量的减少以及三峡水库对泥沙的拦截作用两个方面分析了三峡水库对长江中下游河床冲刷的影响,具体剖析了现有冲刷数值模拟的最大冲刷量远较实际冲刷量为小的原因,因此得出了在三峡以下长江中下游不宜采用沉管法修建长江水下隧道的结论。对于重庆地区朝天门两江隧道的修建方案问题,文章在分析了决定修建沉管隧道方案可行性的两个关键参数,即河床水深和水流流速后,指出只要采取相应工程措施,采用沉管法修建两江隧道是可行的。     

下穿既有公路的土江冲隧道双层管棚设计及监测分析

位于常—吉高速公路上的土江冲隧道是一座下穿既有公路的四车道连拱隧道,施工中为了控制地面沉降,在洞口段采用双层管棚作为辅助施工方法,保证了隧道施工安全和319国道的畅通;在隧道开挖过程中,掌子面附近的管棚变形最大,隧道开挖纵向影响范围为1.5~2.0倍开挖高度。文章介绍了管棚设计、施工情况和监测结果。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

综合交通线网规划方案合理性评价内涵探讨

文章从合理性的一般哲学解释出发,论证出综合交通线网规划方案合理性存在的必然性,然后分别从多方式合理分工、各交通线路分阶段整体推进、交通线网投资实施总体控制、交通网络构建符合OD分布规律、以及线网规划目标考虑资源消耗限制等方面,深入分析合理的综合交通体系应具备的特征,并由此推荐系列评价指标集,从而为综合交通线网规划方案合理性评价提供理论依据。