水下非接触爆炸载荷下双层底结构单元抗冲击性能研究

舰船结构水下非接触爆炸的动态响应研究是舰船生命力评估的基础。基于普通双底结构,设计了3种新式的X型、Y型双底单元和Ⅰ型双层底结构单元,分析了4种结构在200 kg TNT炸药不同爆距冲击波载荷作用下的损伤变形特征,运动响应以及结构的吸能特性。结果表明,X型、Y型单元吸收较少能量,尤其内底板吸收能量少,应变、冲击速度和加速度响应值也小,内底板更安全。Ⅰ型单元外底板的变形和应变小,其安全半径约为15 m,其余3种单元安全半径都约为20 m。4种结构临界半径都小于10 m。     

Modelling and control of a new differential steering concept

This paper presents a new steer-by-wire concept using an all-wheel drive vehicle layout with in-wheel motors while completely omitting the application of any dedicated steering device. Steering is based on the so-called differential steering principle which generates the necessary steering moment about the kingpins by a traction force difference between left and right sides of the vehicle. In order to investigate the behaviour of the vehicle and to design the underlying control algorithms, a planar vehicle model is presented, where the vehicle is described as constrained non-holonomic system requiring a special treatment. A state feedback linear controller for controlling of the lateral dynamics of the vehicle at higher speeds and a simple PI angle controller for low-speed manoeuvring are developed. The resulting behaviour of the system is investigated by various simulation experiments demonstrating a comparable steering performance of the new steering concept as that of conventional passenger cars.     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

电动助力转向系统阻力模拟器研究及实现

研究电动助力转向系统阻力模拟器的控制方法，探索一种利用单片机控制电动机转矩为试验台提供转向阻力的方法。介绍了阻力模拟器的结构、控制方法、工作原理，研究了电动助力转向系统阻力模拟器的功能及实现方法。     

三峡库区船舶碰撞能量损失方法的研究

采用外部碰撞力学方法计算2艘2 000 t级化学品船以不同速度,不同碰撞角,在不同碰撞点相撞后的能量损失,并利用显示动力有限元软件LS_DYNA模拟2艘化学品船在能量损失最大情况下碰撞的响应.     

电动助力转向系统滑模变控制技术研究

以电动助力转向系统中直流助力电机的控制器为研究对象，依据助力电机的数学模型，应用带观测器补偿的滑模变结构控制方法，设计了滑模变控制器，通过调节助力电机的电压，获得预期的输出电流。仿真结果表明，所设计的滑模变控制器使助力电机具有很好的动态性能，系统基本无抖动现象，实现了助力电机输出电流对目标电流的跟踪特性。     

滑坡推力安全系数的讨论

不同安全系数定义下抗滑桩上推力设计值不同,探讨了不同安全系数下对滑坡推力设计值的影响,采用下滑力超载储备安全系数计算的滑坡推力设计值最大,同一强度储备安全系数的推力设计值大于双强度储备安全系数下的滑坡推力J设计值.提出了双强度储备安全系数的滑坡推力计算,此中定义更符合边(滑)坡破坏的实际情况,传统的滑坡推力设计采用下滑...     

摩擦焊在十吨挂车车轴焊接中的应用

摩擦焊技术以其可靠的工艺、稳定的质量、安全的使用性在汽车零部件制造中得到认可。摩擦焊过程参数控制和工艺验证，是保证挂车车轴焊接可靠性的重要条件，对挂车车轴生产质量的稳定起着关键性作用。     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.