洛卢公路洛河大桥设计简介

介绍了洛卢公路洛河大桥所采用的技术标准、桥型、截面型式及结构计算,并介绍了该桥设计在构造上所做的特殊处理及施工要点。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

堆积体围岩中隧道洞口段修建技术

主要介绍丹 (东 )本 (溪 )高速公路的张家隧道右线洞口段通过弃渣堆积体围岩的施工技术。施工中采用自钻式锚杆和注浆工艺并获得成功。     

1-50m钢混结合梁施工过程中的稳定性分析

利用SAP84计算程序和根据设计规范手算相结合 ,对 15 0m钢混结合梁施工过程中开口截面钢梁的稳定性进行分析比较 ,介绍建模及计算过程 ;同时根据计算结果 ,揭示结构的薄弱环节 ,并依此检验为防止结构失稳而采取的结构构造措施     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

盐渍土地区公路边坡的生物防护

结合实践经验论述了盐渍土地区公路边坡生物防护技术的意义,介绍了公路边坡生物防护的主要模式、护坡植物的选择原则以及主要的护坡植物类型。     

施工导流在内河航道干地开挖工程中的应用

通过施工导流在内河航道干地开挖施工中的应用，结合内河航道干地开挖的具体特点，分析影响施工导流成败的主要因素．介绍了在施工中应注意的主要技术要点。     

结构型式对双层壳声辐射特性影响研究

基于有限元及边界元法，运用有限元计算软件ANSYS和声学软件SYSNOISE，通过对圆柱壳体结构形式（耐压壳板的厚度、肋骨的布置）的改变，分析了结构形式对水下结构辐射噪声的影响，找到了结构型式改变对其结构辐射噪声的影响规律。同时研究了圆柱壳不圆度对结构振动和声辐射的影响，结果表明圆柱壳不圆度的存在，一定程度上加强了水下结构的振动，且壳体截面的不圆度越大，结构的辐射声功率越大。这对降低水下航行体的噪声具有重要研究价值。