工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

用高温超导线圈和常导线圈构成的混合式电磁悬浮系统

常导电磁吸力悬浮系统悬浮气隙小、悬浮功率大,电动斥力悬浮系统不能实现静止悬浮、磁场污染大。由于受电流变化率限制,单独采用高温超导线圈构成的电磁吸力悬浮系统不能实现稳定悬浮。经分析比较,提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。采用这种混合式悬浮方案可增大悬浮气隙、实现稳态"零"功率悬浮、减轻车体重量、降低制冷费用、且无磁场污染。     

我国高速铁路速度目标值问题的研究

196 4年日本建成东海道干线时速 2 0 0 km/h的高速客运铁路 ,揭开了世界高速铁路发展的序幕。由于高速技术日趋成熟和它自身所具有的技术经济特征 ,适应了各国经济、社会发展的需要 ,世界各国竞相提高速度、修建高速客运铁路 ,至今已有 10个国家 (日本、法国、英国、美国、意大利、西班牙、荷兰、俄罗斯等 )建成时速 2 0 0 km/h以上的高速铁路。高速铁路的修建和发展标志着世界铁路已进入了向高速发展的新时代。本论文不涉及对高速铁路系统模式优劣的比选 ,仅就对已报国家审批的高中速共线方案的高速铁路中的有关问题进行研究和探讨。本文提出了我国发展高速铁路是当务之急 ,讨论了高速铁路目标值的确定 ,对于高中速共线运行方案下的有关部分参数选取 ,提出了优化方法 ,以期为高速铁路规划和建设作参考 ,为深化研究提供基础条件。     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

车体材质对城轨车辆运行阻力的影响

介绍了铝合金、不锈钢和耐候钢等三种车体材质对车体质量及城轨车辆运行阻力的影响。     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

房室隔疏松组织间隙及其有关的组织结构

利用４例人心房室隔水平连续组织切片，观察了房室隔内的疏松组织间隙和与其有关的组织结构：包括心房肌至房室结的过渡性心肌纤维，冠状窦末段的形态结构以及冠状窦口后方的右房后窝等。并结合临床进行了讨论。     

略论施工机械的选型

施工机械的选型,是施工机械前期管理中的一个重要问题.本文就施工机械选型前的准备工作,选型的基本原则,选型的经济性评价等方面进行了阐述论证,提出了施工机械选型的十条基本原则和定量评估的方法.     

编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。