基于状态转换的ECU功能测试研究

针对传统设计ECU功能测试用例时无法兼顾输入动作的组合与有序状态迁移的问题,提出一种基于状态转换的黑盒测试用例的设计思想,并结合SCU功能测试用例设计实践,阐明了应用状态转换进行功能测试用例设计的方法和流程,并提供了一整套满足ECU功能测试的软硬件测试系统平台的搭建方案。     

远程油门在粉粒物料运输车上的使用

针对原粉粒物料运输车未配备远程电子油门系统使用不便的问题,介绍了加装了远程油门系统的粉粒物料运输车的使用方法,并为远程油门设计加装了定速装置,可以任意调整发动机转速且能实现任意转速定速功能,为今后类似的设计提供了参考。     

Stop-and-go traffic analysis: Theoretical properties,environmental impacts and oscillation mitigation

This study aims (i) to analyze theoretical properties of a recently proposed describing-function (DF) based approach (Li and Ouyang, 2011; Li et al., 2012) for traffic oscillation quantification, (ii) to adapt it for estimating fuel consumption and emission from traffic oscillation and (iii) to explore vehicle control strategies of smoothing traffic with advanced technologies. The DF approach was developed to predict traffic oscillation propagation across a platoon of vehicles following each other by a nonlinear car-following law with only the leading vehicle’s input. We first simplify the DF approach and prove a set of properties (e.g., existence and uniqueness of its solution) that assure its prediction is always consistent with observed traffic oscillation patterns. Then we integrate the DF approach with existing estimation models of fuel consumption and emission to analytically predict environmental impacts (i.e., unit-distance fuel consumption and emission) from traffic oscillation. The prediction results by the DF approach are validated with both computer simulation and field measurements. Further, we explore how to utilize advantageous features of emerging sensing, communication and control technologies, such as fast response and information sharing, to smooth traffic oscillation and reduce its environmental impacts. We extend the studied car-following law to incorporate these features and apply the DF approach to demonstrate how these features can help dampen the growth of oscillation and environmental impact measurements. For information sharing, we convert the corresponding extended car-following law into a new fixed point problem and propose a simple bisecting based algorithm to efficiently solve it. Numerical experiments show that these new car-following control strategies can effectively suppress development of oscillation amplitude and consequently mitigate fuel consumption and emission.     

生态袋护岸的设计要点探讨

通过算例探讨了生态袋在边坡稳定分析中的作用和水位波动区下满足局部稳定的生态袋最小尺寸，给出了生态袋安全分析方法。结果表明:生态袋能提高边坡的稳定，避免表层的浅层滑动，边坡稳定安全系数随着生态袋防护范围厚度的增加而增加； 生态袋的尺寸基本随河道流速的增长呈幂指数增长，对河道流速较为敏感；生态袋护岸抗滑移分析、抗倾覆分析和抗剪切分析计算公式简单直观，但技术参数和安全系数的取值是关键。     

城市轨道交通电气系统网络负荷建模方法研究

城市轨道交通电气系统网络存在分散性、时变性、随机性、多样性和非连续性等多种特性。介绍了几种常用的经典负荷模型结构。针对该电气系统网络系统的特点,采用带有反馈模拟云数据生成器,应用隶属度函数与经典负荷模型相结合理论,提出一种基于窗函数的负荷模型建模方法,并对该方法进行了仿真验证。     

Comparing Fisher Interviews,Logbooks, and Catch Landings Estimates of Extraction Rates in a Small-Scale Fishery

Researchers are turning to alternative data sources (e.g., resource user knowledge) to provide information required for wildlife management. Little is known about the reliability of data elicited from resource users relative to data obtained from user-independent approaches (e.g., observations of fish catches). We test for consensus among three methods that quantify past (1996 to 2007) seahorse catch-per-unit-effort (CPUE) for a small-scale, data-poor fishery in the Philippines: interviews with fishers about good, bad, and typical catch; fisher logbooks; and observations of catch landings. Interviews and logbooks indicated no trends in CPUE through time, consistent with results from the fisher-independent metric, catch landings. Although interview estimates of “typical” CPUE greatly exceeded “typical” observed catches and logbook estimates, interview estimates of “bad” CPUE were comparable. Catch landings estimates for a fisher in a particular year were uncorrelated to what he reported during retrospective interviews. Interviews should be used cautiously to inform specific catch targets (e.g., total allowable catches), although including interview questions about a range of catch experiences (e.g., good, bad and typical), may improve interview-derived data. Logbooks are particularly useful for capturing information about fishing expeditions that produce no fish, which are largely missed by other methods.     

具有特色建筑空间的徐家棚车站设计技术探讨

为解决越江大盾构区间引起的大型换乘车站建筑功能复杂多样、使用标准高、结构型式复杂变化的问题,结合已运营的具有特殊建筑空间设计的武汉地铁8号线徐家棚站,全面探讨车站换乘方式、建筑方案、使用功能、空间效果、工程风险、结构受力等问题,并提出合理可行的工程设计创新措施; 借助提升空间、增大柱跨、通透中庭、特色装修及不同层次空间布局,打造车站高大上的空间效果; 采取合理的支撑体系及止水方案,确保长江一级阶地高承压含水层条件下的超深超大基坑的安全; 采取底板设置抗拔桩、板墙节点加腋、临时传力体系和梁柱转换体系措施,解决车站大跨度、大中庭结构设计及开孔多等结构受力问题; 创新Y型扶梯柱和悬吊天桥通道,节约站台公共空间。     

三体船侧体布局及型线优化设计研究

采用分层次优化,首先以总阻力最小为优化目标对某三体船侧体横向和纵向的相对位置进行了优化研究,得到阻力性能最优的三体船侧体布局方案;然后基于侧体最优布局,进行型线优化,最终完成三体船的侧体布局和型线的序列优化。结果表明,所采用的三体船侧体布局及型线优化方法具有可行性,可为三体船船型设计提供参考依据。     

船体外板自动展开程序

在船舶结构设计中,外板展开图的信息是船舶设计建造的关键,它的精准性直接影响船舶的建造质量。利用Auto LISP语言编制的外板自动展开程序功能,阐述了按水线、纵剖线和边舱展开及自由展开几种外板展开模式的原理和实现方法,并就程序编制和使用过程中的注意事项作了技术说明。实践证明,该程序的应用提高了外板展开图的绘制精度,保证了图纸质量。