卫星探测舰船能力仿真研究

针对多颗卫星联合对舰船目标观测活动中的探测能力问题,研究对其量化描述方式并进行仿真。综合运用运动仿真、概率论、连续马尔科夫链和蒙特卡罗法等方法对卫星探测舰船活动各阶段建立相应的模型,并结合数学函数提出多星联合探测能力量化指标。以某作战想定为背景,进行了仿真计算,得出结论。仿真结果表明该模型能够解决多星联合观测舰船目标问题,并且该研究成果对航天装备效能评估和装备体系发展规划论证具有一定的指导意义。     

基于二值HT的多LFM信号检测

Wigner-Ville分布对于单分量LFM信号有很好的时频聚集性,但WVD是二次型变换,故对信号环境中复杂的多LFM信号不可避免的存在交叉项的干扰。HT可以消除交叉项的影响,能够很好的对多个LFM信号进行检测,但存在大信号淹没小信号的现象。提出二值HT能够很好的解决上述问题,为多LFM信号的检测技术提供理论依据。     

极低频发射天线场地等效电阻率的计算

通过对均匀半空间有限长导线源辐射场强的理论分析,表明极低频发射天线场地等效电阻率主要由天线两端接地点的位置决定。文章对MT法测量的视电阻率数据的处理和天线等效电阻率计算方法上提出了几点看法,以供参考。     

移动Agent在网络信息安全中的应用研究

针对如今计算机网络面临的信息安全问题,分析了传统的解决网络安全问题的入侵检测技术、拥塞控制技术和故障管理技术的不足之处,引入移动Agent应用于这三种系统中,分析其可行性,并提出了基于移动Agent的三种系统的组成和系统结构。     

基于三元阵的舰船水压场微弱信号检测方法研究

利用三元阵水压场同步测试系统一次海上实船水压场测试试验的三阵元数据开展了低信噪比实船水压场的特征提取和检测方法研究.结合三阵元,分别采用了自适应滤波方法和功率谱估计方法对所获得的试验数据进行分析处理.结果证明,基于自适应滤波和基于功率谱估计的三阵元联合浮动门限能量检测方法能有效抵消噪声干扰,所设计的浮动门限随海浪背景噪声的变化而调整,具有很好的适应性,能在低信噪比下达到较高的信号检测率.     

背压对等径角挤压坯料变形的影响

采用有限元方法研究了背压对1100Al等径角挤压的影响．分析了坯料的变形、等效应变分布、最大主应力及变形载荷的变化．模拟结果表明,通过在出口通道施加背压,提高了坯料充填模具外侧拐角的能力,使得坯料横截面上等效应变分布更加均匀;坯料在变形过程中的最大主应力降低;但变形载荷随背压的增加不断增加．分析得出,施加适当的背压有助于提高坯料的变形均匀性,降低坯料表面的开裂倾向．     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

Workspace analysis to generate a collision-free torch path for a ship welding robot

We propose a method to determine the optimal initial location and to generate torch paths for a ship welding robot with 6 degrees of freedom (DOF). The optimal initial location is determined using an objective function, which is set up by combining constraints on the torch posture, manipulability, and the range of each joint angle to avoid collisions. A genetic algorithm (GA) is used to optimize the objective function because it does not require additional derivatives. After the initial location is determined, torch paths are generated by interpolating the starting point, endpoints and torch postures using inverse kinematics. Our method can be applied to automate the welding job for each block during ship building, irrespective of the shape of the robots, by changing the objective function.     

多路声纳换能器绝缘电阻及等效电容智能检测仪研究

针对目前国内装备的大型声纳换能器的几百个基元检测主要还依靠人工采用兆欧表检测方法的落后现状,提出了开发多路声纳换能器绝缘电阻及等效电容智能检测仪的思路,主要介绍了系统组成,绝缘电阻和等效电容检测原理和方法。     

SLOPE/W软件总应力法和有效应力法的应用

按简单条分法和简化毕肖普法,通过算例阐述了SLOPE/W软件总应力法和有效应力法的计算原理和应用,指出SLOPE/W软件虽然在输入时没有区别总应力参数和有效应力参数,但结合输入时是否定义孔隙水压力,用户可以从计算方法的原理上来区别软件是按总应力法还是按有效应力法计算.