Determination of Critical Slip Surface of Soil Slope

A new complex method is presented considering not only the improvement upon the ＂bad ＂design point, but also the diversity of the newly generated complex, which is obtained by replacing the ＂bad ＂design point with the better design point located at the line between the ＂bad ＂design point and the ceotroid of the remaining design points of the old complex. The new complex method is applied to searching for the critical slip surface of two non-homogeneous soil slopes. The comparison of the results obtained by the new complex method with that by the basic complex method shows that the new complex method is much more likely to find the true critical surface for the randomly generated initial complex.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

组合结构力法分析

本文应用集合概念，对组合结构作了形式化描述。通过矩阵分析，导出了力法方程的统一列式。给出了算法实施的流程框图和具体算例。     

混凝土搅拌运输车主、副车架的设计

对混凝土搅拌运输车的主、副车架进行了定性和定量的受力分析,从中推导出主、副车架的简化强度计算方法和强度校核公式。并以SX5254GJBDM364混凝土搅拌运输车为例进行了实例分析和计算。     

悬拼梁段长线台座吻合法预制施工关键技术探讨

深圳湾公路大桥非通航孔桥梁体施工,设计为分段预制,海上拼装,预制施工线形控制和梁段间吻合匹配,这些是其关键技术。重点介绍采用长线台座吻和法预制梁段时吻和匹配施工工艺,线形控制方法,台座设计检算及施工中易出现的问题等。     

B_0-B_0机车转向架直线运行横向轮/轨力和蛇行稳定性的理论研究(上)

本文根据轮/轨蠕滑理论提供了计算和分析B_0—B_0机车转向架直线运行横向轮/轨力的方法,并以SS4型电力机车作为验证实例,理论计算和实际测试的结果相接近。作者采用这种方法对轮/轨力进行可靠的分析,旨在论证我国现有电力机车转向架蛇行稳定性所要求的最佳轮对定位刚度。本文论证结果符合于作者在文献[1]中提出的轮对定位新方案,它可适用于最大运行速度为100km/h的现有SS型电力机车。     

空间复合材料加筋板流固耦合振动分析

本文用结构有限元与流体边界元方法研究了空间复合材料加筋板结构的流固耦合自由振动，推导了用于结构分析的分项插值型复合材料八节点板单元和三节点梁单元，以及用于流场分析的线性边界单元。用修正的RIRZ向量法与波前法相结合的方法求解特征值问题，避免了因附连水质量引起的结构质量矩阵为满阵的内存困难和非对称矩阵方程约化困难。算例表明，附连水质量对复合材料结构的动力特性影响要比各向同性材料严重得多。     

GM(1,1)模型与指数模型在基桩沉降预测中的应用

以某大型基桩的沉降预测为例,利用灰色系统理论的GM(1,1)与Aeax曲线模型进行基桩在外荷载作用下沉降量的预测。结果表明:两种模型对于呈指数变化规律的系统能获得较好的预测结果;两种模型对基桩累计沉降的预测符合工程实际,对各级荷载作用下的本级沉降预测不够合理。对两种模型关系的研究表明,两者有内在联系,都属指数曲线预测模型,且指数曲线Aeax预测模型比GM(1,1)模型应用起来更简单,方便。