串联混合动力汽车功率跟随控制模式的实现

以电动汽车仿真软件ADVISOR为基础,根据混合动力汽车的不同工况,分析和建立了串联混合动力电动汽车的一种控制模式——功率跟随控制模式。并且详细分析了功率跟随控制模式在ADVISOR软件中的实现方法。     

提高客车电气系统可靠性的措施

客车质量的好坏离不开电气系统的可靠性。简要介绍如何提高客车电气系统的可靠性。     

混合动力电动汽车技术现状及发展前景

混合动力电动汽车（HEV）已经成为当前汽车行业研究的热点。介绍了混合动力电动汽车的发展状况、动力系统的类型及特征,详细论述了混合动力电动汽车的关键技术,并对混合动力电动汽车的发展前景进行了探讨。     

变频调速技术应用的经验

介绍变频调速技术的特点,以及在港口装卸设备电气传动控制系统改造中选择和应用变频器的技巧和经验.     

大型油船进出钦州港拖船功率探讨

为了确定大型油轮进出港口所需拖轮功率,通过对目前最常用的两种确定功率的方法进行对比分析,得出各自的优点和不足,结合钦州港实际情况,运用这两种方法确定在不同条件下,大型油轮进出钦州港所需拖轮功率。     

船舶电气安装工艺分析

文章结合在造项目船的作业情况,对船舶电气舾装件的安装、电缆敷设的工艺应用等进行了分析研究,并提出优化建议,以提高电装生产效率.     

油田树状集油可更换电伴热管道的开发及应用

为了简化集油工艺、降低工程投资,对于外围油田的低产、油气比高以及原油凝固点较低的油井,通常应用树状电加热集油工艺,其中电加热保温管道是该工艺的关键部件和设施。传统的电加热管道存在着接头数量多、过热烧损等问题,影响正常运行。文中设计一种可更换电伴热体的新型伴热保温管道结构,使电热体接头数量显著减少,实现了不开挖更换和修复伴热体,延长了管道整体寿命,增强了电加热系统的稳定性和可靠性,取得了良好效果。     

车辆动力性能评价仿真系统设计

运用LabVIEW图形化编程软件,通过结构化设计及模块化编程,设计出车辆动力性能评价仿真系统.该仿真系统考虑了多种参数对车辆动力性能的影响,并且能够处理Excel扭矩数据表格和生成Word报表文档,使用方便,仿真结果准确性较高.利用此仿真结果可进一步优化车辆的结构参数,从而提高车辆的动力性能.     

The Evaluation of the 2nd Ocean Plan in Korea: Focused on the Implementing Power of the Plan

There seem to be two types of ocean planning system in the world. First, the federal or united government suggests a basic framework of the plan which is followed by states, countries or areas as shown in the European Union, the United States, Canada, Australia, and so on. Second, a powerful central government prepares a basic ocean plan that guides the following sector plans of the relevant ministries. These cases are shown in Japan, Korea, and China. In Korea, the 2nd Ocean and Fishery Development Plan (OK21, 2011–2020) was made as a comprehensive ocean plan reflecting recent natural and social changes including global warming. The OK21 is declarative in its nature, and so evaluated by its sector plans, which have some specific implementing means such as budgets and manpower, organization, and so on, by the relevant laws. The 2nd OK21 is supported by 21 legally binding sector plans, 14 more than in the 1st plan, thus guaranteeing more effective implementation than in the 1st plan. In addition, most of sector plans are planned to be carried out through the well-coordinated system among the related ministries, thus showing a high degree of implementing efficiency of the plan. Every marine area in the plan, including marine environment, is being supported by more sector plans than before, indicating the equitable development of marine areas in the future. In sum, the 2nd OK21 is expected to show more implementing power due to the well-organized sector plans than in the 1st plan.     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.