进气预混甲醇降低柴油机碳烟与NOx排放的影响参数研究

在485QDI自然吸气直喷式柴油机上研究了不同喷嘴、不同供油定时、不同喷醇的起点对进气预混甲醇发动机的碳烟、NOx排放和经济性的影响。研究结果表明，为了降低碳烟和NOx排放以及提高燃油经济性，与燃用纯柴油的发动机相比，进气预混甲醇发动机的柴油喷射定时可以保持不变或稍小，但燃油喷嘴的孔径应适当减小，预混甲醇的发动机负荷起点应适中。     

基于光学非接触测量的车身覆盖件曲面品质综合评价

车身覆盖件曲面品质的纯几何评价准则是曲面品质分析和优化的依据。针对曲面的误差控制、曲面的几何连续性、光顺性、美观性等定量和定性指标，分析了非接触激光扫描测量在实物曲面重构中的测量精度和测量效率。通过非接触测量方法获取了车身覆盖件曲面形状，应用模糊理论建立了一种车身覆盖件曲面品质分析的综合评价方法。该方法可以较好地评定车身覆盖件曲面的审美学特征，为车身设计提供有效的评价尺度。     

GZ机油添加剂对发动机环保性能影响的试验研究

通过对各种汽油机、柴油机进行的有无GZ添加剂时的对比试验,证明了GZ机油添加剂能降低发动机的机械噪声,减少柴油机排气烟度和汽油机的怠速有害排放,改善发动机的环保性能。     

高速公路红砂岩路基施工技术与质量控制

阐述了针对红砂岩路用试验研究的结果,在施工中采取相应的工程技术措施对红砂岩的处治,使红砂岩路用性能得到改善.并介绍了高速公路红砂岩路基的施工技术、质量检测与控制.     

摩托车道路行驶阻力分析与测量

分析了摩托车道路行驶阻力的数学模型,并在天津摩托车技术中心试验场对某125型摩托车采用滑行能量法进行了滑行参数测量。用最小二乘法拟合出摩托车的行驶阻力曲线,并将该曲线在不同速度下的阻力数值与当量惯量法的阻力数值进行了比较,二者达到了很好的统一。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

声强测量技术在摩托车噪声控制中的应用

本文介绍了声强测量技术在某１２５摩托车噪声控制中的应用，利用开发的ＣＥＣ声强测量分析系统对该摩托车进行噪声识别，快速，准确地找到其主要噪声源，通过有针对性地采取降噪措施，使该车行驶噪声显著降低。     

国产摩托车排放现状及控制进程分析

本文根据百余种国产摩托车排气污染物底盘测功机工况法测试结果，建立了相应的数据库，本文综述了国产摩托车排气污染物排放现状，在对欧洲和台洲摩托车排放控制进行考察和分析的基础上，结合我国情况，提出了摩托车排放控制进程建议。     

低噪声电站噪声测量问题

分析了现实采用的几种移动电站噪声测量方法，根据实际发展需要。针对噪声测量中存在的一些问题，提出了低噪声电站噪声测量方法的一些看法。     

偏压连拱隧道病害分析及治理措施

基于某高速公路偏压连拱隧道衬砌发生严重破坏和隧道上方发生较大规模的山体开裂等病害,采用地震CT手段对隧道周围的工程地质进行了探测;根据现场监测数据,分析了隧道支护结构的受力状态及其安全性;对复杂地质条件下两种典型的施工方案进行了动态施工的数值模拟,对比分析了不同施工方案对围岩稳定和衬砌受力的影响;探讨了衬砌发生严重破坏的原因,并提出了相应的治理措施。研究结果表明:连拱隧道内侧断裂带、上方松散层等不良地质条件和不合理的施工方案是导致隧道衬砌严重破坏和山体地表开裂的主要原因。研究结果为分析和治理偏压连拱隧道病害提供了依据。