特大型耙吸挖泥船研制及工程应用

针对特大型耙吸挖泥船多工况、大舱容、大挖深、精确与高效控制及良好的航行性能等问题,进行船型、系列化耙头、高效泥泵、耙臂泵和控制系统的研究。采用理论研究、大比例尺模型试验、实船验证等多种研究方法,解决了限制特大型耙吸挖泥船国产化的技术瓶颈。在上述研究成果的基础上,设计建造了2艘特大型耙吸挖泥船,两船服务于我国多个重大港口航道工程,经济和社会效益显著。     

潮位对深海筑堤工程深层土体水平位移的影响

深海筑堤工程中必须对深层土体进行水平位移监测。自动化测斜技术每天能在固定时间自动监测传感器读数,如果设置监测间隔为48 min,即潮位隔天的推迟时间,则可以分析出潮位对深海筑堤工程中深层土体水平位移的影响。结合浙江某筑堤工程的自动化测斜随潮位变化的监测数据等,找出潮位对深海筑堤工程中深层土体水平位移的影响及规律,提出适用于类似工程的应用方法和案例。     

The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.     

偏压连拱隧道施工方法研究

文章采川三维有限元数值模拟研究了偏压连拱隧道不同施工顺序下拱顶下沉、中墙稳定性及初期支护受力特征.研究结果表明,先开挖浅埋侧时,拱顶沉降较小,中墙在施工中的稳定安全系数较大、弯矩较小,初期支护受力较大;对于浅埋偏压连拱隧道,围岩变形及中墙在施工中的稳定性控制更为重要.所以,从有利于围岩变形、中墙稳定性控制以及中墙受力的角度出发,宜采用先开挖浅埋侧的施工方法.     

交通土建类工程造价专业工学结合人才培养模式研究

文章介绍了广西交通职业技术学院交通土建类工程造价专业工学结合人才培养模式的实践现状,分析了开展工学结合人才培养模式中出现的问题,提出了工学结合人才培养模式有效运行的措施。     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

板底压浆对水泥混凝土路面板脱空处治研究

根据广西桂柳高速公路管理处日常养护调查情况,选择柳州至王灵高速公路中三段脱空比较严重路段作为试验路段,采用板底压浆方式进行处治,从原材料质量、压浆材料配合比、施工工艺以及施工质量检测等多个环节加以控制。通过板底压浆效果评定指标可以得出,压浆前、后路面板的传荷系数由68.6%增大至80.3%,脱空率由42.6%减少至13.3%,压浆效果良好,对处治板底脱空具有很好的应用。     

多方式多类型交通分配模型(MMA)在收费型公路网中的应用研究

在对收费型公路运营模式进行研究的基础上,利用交通规划软件建立了基于广义费用的交通流量分配模型即多方式多类型交通分配模型,通过对模型参数的科学标定和网络的合理设置,得到各类车型在特定网络上的流量分配、路段饱和率以及通行费用,并对此模型的应用效果进行分析,最终为区域高速公路网规划、路段交通量预测提供依据。     

武汉鹦鹉洲长江大桥2~#桥墩局部冲刷防护设计

为防止武汉鹦鹉洲长江大桥2#桥墩建设对拟建的武桥水道航道整治工程建设和整治效果产生不利影响,提出将桥墩防护工程和其周边航道整治工程合二为一的设计方案,统筹安排施工进度,并根据建设过程中出现的问题,适时调整设计方案,解决了桥梁建设与航道整治工程之间的矛盾,确保两项工程保质、保量、按时竣工。     

波浪作用下海洋立管试验研究及ANSYS数值模拟

海洋立管在石油工业生产中有着非常广泛的应用,同时也是薄弱易损的构件之一。立管管内有高温高压的流体流过,管外承受海洋环境荷载尤其是波浪荷载的作用,受力比较复杂。由于中国大部分的海上油田水深都比较浅,所以重点研究浅水中的海洋立管。运用相似理论将实际立管模型缩放为试验模型,在管内流体流动及管外波浪荷载作用下,测量立管动力响应,并与Ansys有限元数值模拟结果进行了比较。