南昌红谷沉管隧道短管节干坞内拉合对接施工技术

沉管隧道最终接头短管节在牵移和拉合过程中易发生偏移与倾斜,且GINA止水带压缩到设计值难度较大。以南昌红谷沉管隧道为例,从准备、牵移、拉合及后处理4个阶段介绍短管节对接拉合施工工艺。通过对底钢板打磨、涂抹黄油等,减小底部摩擦阻力。采用计算机控制液压同步提升系统、液压数据量测、钢端壳间距测量等措施,对短管节轴线及平面控制。实践表明:GINA止水带压缩量误差仅为+4 mm,短管节轴线及平面偏差均在可控范围内,短管节干坞内拉合对接操作可行、质量可靠。     

我国城市防洪排涝地下深隧规划设计与施工方法

为了建设符合中国国情的地下排水深隧,解决城市内涝问题,消除"城市看海"现象,采用调研分析的研究方法,通过调研国外城市排水深隧建设的成功案例,借鉴成熟经验并结合我国国情探索出我国城市排水深隧在规划设计、施工技术等方面的建设模式。主要结论如下:1)深隧规划必须坚持雨污分流原则,防涝标准应设为百年一遇;2)深隧层位应建于地下30~50 m的位置,隧道管线应布设在城市易涝区,并且将修建深隧、改造浅管和清淤河道衔接起来,形成一套完整的防洪排涝系统,让深隧的作用得以充分发挥,才能解决城市内涝问题;3)排水深隧要注重防水设计,防止雨水污染地下水;4)为提高深隧的经济效益,应将深隧与地下快速路的规划结合起来,功能上多样化。     

极高地应力软岩隧道超前导洞应力释放及多层支护变形控制技术

为了解决极高地应力软岩隧道大变形控制难题,以兰渝铁路木寨岭隧道岭脊核心段施工为例,通过现场试验和数据分析,得到如下主要结论:1)提出了"先放后抗,抗放结合,锚固加强"的变形控制理念;2)得出了该隧道岭脊核心段"超前导洞应力释放+圆形4层支护结构+径向注浆+长锚杆+长锚索"综合变形控制方案;3)超前导洞应力释放效果明显,正洞累计变形减小幅度约为34%;4)得到了圆形多层支护结构变形规律;5)累计变形均控制在设计预留变形量内,保证了该隧道岭脊核心段大变形控制效果。     

A receding horizon sliding control approach for electric powertrains with backlash and flexible half-shafts

Active control of electric powertrains is challenging, due to the fact that backlash and structural flexibility in transmission components can cause severe performance degradation or even instability of the control system. Furthermore, high impact forces in transmissions reduce driving comfort and possibly lead to damage of the mechanical elements in contact. In this paper, a nonlinear electric powertrain is modelled as a piecewise affine (PWA) system. The novel receding horizon sliding control (RHSC) idea is extended to constrained PWA systems and utilised to systematically address the active control problem for electric powertrains. Simulations are conducted in Matlab/Simulink in conjunction with the high fidelity Carsim software. RHSC shows superior jerk suppression and target wheel speed tracking performance as well as reduced computational cost over classical model predictive control (MPC). This indicates the newly proposed RHSC is an effective method to address the active control problem for electric powertrains.     

A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.     

4缸柴油机停缸仿真及试验研究

采用停缸技术对小型4缸柴油机的燃油消耗率和排放进行了仿真和试验研究。利用GT-Power建立模型并模拟了停缸位置对燃油消耗率的影响,结合传热损失等因素确定了试验停缸位置。在断油式停缸和断油断气式停缸模式下进行试验和燃烧分析。试验结果表明:停缸后缸内等容度降低;断油式停缸后燃油消耗率和NOx增大但炭烟减少;断油断气式停缸后部分试验点燃油消耗率降低,但NOx和炭烟排放增加。     

乙醇汽油对车辆颗粒物排放的影响

在符合国Ⅰ、国Ⅲ、国Ⅴ标准的3辆试验车上,分别燃用国Ⅴ汽油、低芳烃E10、低烯烃E10 3种燃料,进行了NEDC和WLTC工况下的常温冷起动排放试验,重点对颗粒物(PM)排放量和粒子数量(PN)进行分析。结果表明:在两种工况下,燃用乙醇汽油相比普通汽油能大幅降低车辆的PM排放,低芳烃E10对国Ⅰ和国Ⅲ车辆PM降低效果最明显,分别下降19%和35%,低烯烃E10对国Ⅴ车辆PM降低效果最好,下降46%;在WLTC工况下燃用乙醇汽油能大幅降低车辆PN排放,其中低芳烃E10平均降低43%,低烯烃E10平均降低32%。     

超高压共轨系统轨压控制策略研究

为稳定控制超高压共轨系统中的共轨腔压力并缩短轨压控制算法的开发周期,利用AMESim/Simulink联合仿真技术建立了超高压共轨系统轨压控制仿真模型,采取前馈+PID控制算法设计了轨压控制策略,并针对轨压控制中的瞬态和稳态工况进行了仿真计算,最后在试验台架上开展了轨压跟随性测试。结果表明:所制定的前馈+PID控制算法能使轨压稳定在目标轨压附近,上下波动小于3 MPa,且轨压突变时瞬态响应时间小于0.5s,控制结果能够满足超高压共轨系统对精度和速度的需求。     

轻型汽油车N_2O排放特性研究

选择1辆满足国Ⅴ排放标准的轻型汽油车作为试验样车,应用全流稀释排放测试系统在FTP75和US06测试循环下,对车辆在不同测试工况下的N_2O排放水平、车辆N_2O排放的影响因素以及N_2O排放随着车辆里程增加的劣化情况进行了研究。研究结果表明:FTP75循环下的N_2O排放结果高于US06循环,前者是后者的4倍左右;在冷起动阶段,由于催化剂没有达到正常的工作温度,车辆会产生较多的N_2O排放,且随着燃油硫含量的增加,车辆的N_2O排放呈现上升的趋势;随着车辆里程的不断增加,车辆的N_2O排放存在一定程度的劣化。