燃料电池气体温湿度与电堆性能分析

系统性能指标是实现燃料电池工程化应用的瓶颈之一,系统搭建和调试过程中,空气与燃料温湿度是影响质子交换膜燃料电池性能的重要因素,对系统控制策略和辅机搭配方案的制定产生很大影响。本文通过实验与统计相结合的研究方式,研究15 kW燃料电池电堆在增湿温度分别为60℃、70℃和80℃条件下分别进行氢空单侧增湿、双侧增湿和不增湿时的输出功率、发电效率和单电池电压一致性。其中输出功率采用测试台直接测量、发电效率通过经验公式计算、电压一致性则通过巡检记录和统计方法相结合的方式评价。结果表明70℃时各增湿方案下优于其他温度同等湿度条件下的电堆性能,有增湿条件明显优于无增湿方案电堆性能,而双侧增湿和氢空单侧增湿对电堆性能影响不大。     

基于FLOW-3D的新型桩基透空堤消浪性能研究

针对新型附带消浪板桩基透空堤消浪性能,对波浪作用下该新型透空堤的反射系数、透射系数以及波能分布进行研究.采用FLOW-3D数值模拟方法,得出消浪板的开孔率、相对入水深度以及倾斜角度变化时透空堤反射系数、透射系数以及波能分布.结果显示:1)该新型附带消浪板桩基透空堤具有较好的消浪性能,开孔率越小,其反射系数越大、透射系数...     

悉尼与中国城市公共交通绩效的比较研究

为完善悉尼市城市公共交通优先发展政策体系,实现悉尼市“可持续城市交通”愿景,借鉴中国“公交都市”示范项目的指导方针和指标体系,建立了一个基于公共交通绩效水平的评估指标体系,利用中国“公交都市”示范项目数据和悉尼市公共交通运营开放数据,分别计算了各城市的公共交通绩效水平。将悉尼市与中国“公交都市”示范项目试点城市的公共交通发展水平进行了比较研究。结果表明,悉尼市现有交通运输模式为主要依赖小汽车方式出行,虽然悉尼市在促进交通方式转变和新技术应用方面取得了一些进展,但其整体的公共交通服务水平远落后于中国“公交都市”示范项目试点城市。通过借鉴中国城市在“公交都市”示范项目实践中的经验,结合悉尼城市交通发展战略与规划,明确了悉尼市出台“从依赖小汽车出行转变为公共交通优先出行”导向政策的必要性,并提出了多项促进城市公共交通优先发展的政策建议,用以支持悉尼市实现“世界上最宜居城市之一”的发展目标。     

铁矿尾矿砂在公路基层中的应用研究

对铁尾矿砂及尾矿砂加入石灰水泥后的物理力学性能进行了试验研究,并与石灰土进行对比。结果表明：铁尾矿砂掺加石灰、水泥后,其强度随着龄期而增长,具有半刚性材料的特性,用石灰、水泥稳定尾矿砂作为路面基层材料具有很好的路用性能,同时用石灰和水泥稳定的效果更佳。     

面元法预估导管螺旋桨水动力性能的一种新方法

采用一种新的方法预估导管螺旋桨的水动力性能;导管和螺旋桨均采用基于速度势的面元法,它们间的影响通过相互的诱导速度势数值迭代来体现．与诱导速度体现相互影响的方法相比,本文方法可节省编程及计算时间;对JD系列导管螺旋桨的计算与实验结果的比较表明,该方法可以有效地预估导管螺旋桨的水动力性能．     

高速单体船航行性能与结构力学特征综合优化初步研究

建立高速单体船航行性能与结构力学特征综合优化的数学模型,将遗传算法改进成一种适应多目标和多约束的算法,并将其应用于高速单体船航行性能与结构力学特征综合优化计算问题,利用界面友好的VC 软件编程。优化结果表明,改进的遗传算法计算可靠、效率高,并为设计综合性能优良的高速单体船船型准备了良好的基础条件。     

层次分析法在潜艇总体性能评估中的应用与改进

结合潜艇概念设计阶段的特点,提出一种潜艇总体性能的评估模型和评价方法,利用三标度法间接给出判断矩阵,在一定程度上减少了决策者主观因素的影响。针对经验方法在一致性检验时的缺陷,采用统计检验的方法,直接以判断矩阵一致性指标的临界值作为检验标准,简洁可行,且具有一定的理论依据。     

Database of sail shapes versus sail performance and validation of numerical calculations for the upwind condition

A database of full-scale three-dimensional sail shapes is presented with the aerodynamic coefficients for the upwind condition of International Measurement System (IMS) type sails. Three-dimensional shape data are used for the input of numerical calculations and the results are compared with the measured sail performance. The sail shapes and performance were measured using sail dynamometer boat Fujin. This is a boat of 10.3-m length overall in which load cells and CCD cameras were installed to simultaneously measure the sail forces and shapes. At the same time, the sailing conditions of the boat, e.g., boat speed, heel angle, wind speed, and wind angle, were measured. The sail configurations tested were: mainsail with 130% jib, mainsail with 75% jib, and mainsail alone. Sail shapes were measured at several vertical positions for the shape parameters defined by: chord length, maximum draft, maximum draft position, entry angle at the luff, and exit angle at the leech, all of which finally yield three-dimensional coordinates of the sail geometry. The tabulated shape data, along with aerodynamic coefficients, are presented in this article. In addition, numerical flow simulations were performed for the measured sail shapes and the sailing conditions to investigate the capability and limitations of the methods through detailed comparison with the measurements. Two numerical methods were used: a vortex lattice method (VLM) and a Reynolds-averaged Navier–Stokes (RANS)-based computational fluid dynamics method. The sail shape database, in association with the numerical results, provides a good benchmark for the sail performance analysis of the upwind condition of IMS type sails.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

T型焊接接头疲劳性能研究

T型焊接接头在船舶与海洋工程结构中广泛应用,研究T型焊接接头的疲劳性能对于提高船舶与海洋工程结构的强度具有重要意义.针对工程中常用的四种焊趾形式的T型焊接接头,利用有限元计算和模型试验两种方法对其疲劳性能进行了研究.结果表明,平面型焊趾是较优的T型接头焊趾形式.