沃纳模型在大学生敏感性问题调查中的应用

利用随机化回答技术的Warner模型对大学生考试作弊这一属性特征的敏感性问题进行了抽样调查，并针对出现的问题及应采取的有效措施进行探讨。     

A note on the use of correlation coefficients for assessing goodness-of-fit in spatial interaction models

The use of correlation coefficients to evaluate the accuracy of spatial interaction models is inappropriate unless such models have been fitted using least squares techniques. In other cases the correlation involves an implicit intercept value and a regression coefficient that may significantly modify the interaction model's estimates. Researchers have not acknowledged the role of these two parameters when the correlation is used. A generalized root mean square error is proposed as an alternative indicator of accuracy that may be used with any model.     

Modelling navigation in muddy areas through captive model tests

Many access channels and harbours suffer from sedimentation and formation of mud layers. To keep navigation safe and economic, extensive maintenance dredging is needed. Until now, the required level of dredging has always been determined by making use of the physical characteristics of the mud layer, which does not necessarily result in efficient dredging. Ship behaviour also matters, and knowledge of ship manoeuvrability can help to redefine the level of dredging required. A mathematical model of manoeuvring for simulation purposes, based on a comprehensive series of captive model tests, is presented, along with a selection of results.     

组合预测在港口吞吐量预测中的应用研究

以某港口1996—2002年吞吐量为原始数据,按照“误差平方和最小”的准则,把一元线性回归模型和GM(1,1)模型组合起来,对某港口2004—2008年的吞吐量进行了组合预测。     

低功率氙光单元组的开发

以华晨V5车型氙光组为例,通过选取光源、挡板和参数,设计多椭球反射杯,并运用ASAP进行配光模拟,从而实现氙光单元的开发设计.最后通过PAS单元进行实际配光模拟和样件实车夜视对比分析,得出配有25W低功率氙光单元照明系统的车辆具有更佳的照明效果.     

温度对旋转钻进破岩功耗的影响研究

岩石在常温、常压下的变形破坏理论已非常成熟，但随着钻探深度不断的增加，岩石将要面临高地温、高围压的环境，这些因素将直接影响钻进过程。通过研究旋转钻进过程中能量的传递转移，建立岩石破碎的简化模型，利用单位体积破岩能耗来探究温度对钻进过程的影响。研究结果表明:随着钻进深度的增加，在一定的围压作用下，温度升高而岩石的弹性模量却逐渐减小，压入深度随温度升高呈抛物线形上升，破岩功耗随温度呈曲线上升，并在经过阀值温度400℃后趋于平缓。     

铁路线路三维设计模型的建立方法研究

介绍了既有线路三维模型的建立理论及实现方法．通过分析它们存在的困难和不 足，提出了一种利用航测或外业勘测地形数据，在微机上建立设计线行经地区的三维空间的地形模型；利用横断面数据建立线路三维模型，通过修改地形模型达到地形上显示三维线路模型的一种方法．     

基于故障树的船用核动力装置维修性建模研究

结合船用核动力装置的特点,阐述了建立基于故障树维修性模型的方法和流程.以建立故障树为基础,建立了关于船用堆余热排出系统基于故障树的维修性模型,对其进行定量分析得到系统修复性维修时间.该方法直接利用可靠性分析中的故障树建立模型,节省了建模强度,计算结果由可靠性数据支持,克服了以往定量分析中维修性数据不足的缺点.     

Virtual test rig to improve the design and optimisation process of the vehicle steering and suspension systems

A virtual test rig is presented using a three-dimensional model of the elasto-kinematic behaviour of a vehicle. A general approach is put forward to determine the three-dimensional position of the body and the main parameters which influence the handling of the vehicle. For the design process, the variable input data are the longitudinal and lateral acceleration and the curve radius, which are defined by the user as a design goal. For the optimisation process, once the vehicle has been built, the variable input data are the travel of the four struts and the steering wheel angle, which is obtained through monitoring the vehicle. The virtual test rig has been applied to a standard vehicle and the validity of the results has been proven.     

A passenger car driver model for higher lateral accelerations

Due to increasing demands for time and cost efficient vehicle and driver assistant systems development, numerical simulation of closed-loop manoeuvres becomes increasingly important. Thus, the driver has to be considered in the modelling. On the basis of a two-layer approach to model a driver's steering behaviour, the field of application is extended to higher lateral accelerations in this study. An analytical method to determine the driver parameters is presented, which is based on the two-wheel vehicle model. The simulation results are determined using a full vehicle model including all essential nonlinearities. Standard manoeuvres in the nonlinear range of vehicle handling behaviour are performed. A cornering manoeuvre is chosen to show the characteristics of the proposed driver model.