某出口米轨动车组(Tc车)车体设计及试验对比研究

介绍了使用大型通用计算机辅助工程软件ANSYS和有限元方法,对某出口米轨动车组(Tc车)进行了分析计算的过程,并通过实际物理样机试验数据与计算数据的比对,分析车身强度的可靠性。     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.     

连锁零售业库存／配送一体化决策优化模型与算法

针对在一个区域内拥有一个配送中心和n个在地理位置上分散的连锁分店的连锁零售业．建立VMI思想下适合于A类商品和一些重要的B类和C类商品的单一商品确定型需求的库存／配送一体化优化模型，并采用逐步迭代的方法对模型进行求解，可得出使系统在一定时期总成本最小的经济订购批量，最后用一个算例使连锁零售业库存，配送一体化决策在物流成本节约方面的优越性得以验证。     

基于加权Kendall相关系数和序贯代理模型的有限元模型修正

为了提高桥梁结构有限元模型修正的效率和效果，提出基于加权Kendall相关系数和序贯代理模型的有限元模型修正方法。首先，建立基于目标响应误差和待修正设计参数灵敏度的加权Kendall相关系数指标，并采用凝聚层次聚类算法，合理确定待修正设计参数的数量和位置，保证待修正设计参数对目标响应具有合适的解耦能力；其次，为解决传统一次性代理模型法在构造代理模型过程中产生的欠采样或者过采样的问题，采用基于FLOLA-Voronoi通用序贯设计策略的序贯代理模型法，提高构造代理模型过程中试验设计样本的利用率和模型修正效率；最后，根据一座斜拉桥的静动力荷载试验数据进行有限元模型修正。结果表明：基于FLOLA-Voronoi算法的序贯代理模型能够合理地确定构造代理模型所需的样本数量和位置，使得在相同样本数量的情况下，序贯代理模型比一次性代理模型具有稍好的精度指标；采用加权Kendall相关系数指标的聚类方法可以得到具有合适解耦能力的待修正设计参数，使得修正前大误差目标响应的误差显著下降，小误差目标响应的误差基本都处于合理范围内，有效地降低了目标响应的整体误差；同时，有限元理论静动力响应与实测静动力响应的平均误差分别由5.56%、8.43%降低至1.87%、3.41%，并且相较于常规方法，修正精度更好，所提方法可以用于桥梁结构有限元模型修正，可得到准确的桥梁结构数值模型。     

铁道车辆轴箱弹簧断裂故障对动力学性能的影响

车辆运行过程中,当轴箱弹簧突发断裂故障,会造成动力学状态和性能突变,一系悬挂刚度突然减小,暂时失去承载能力,会威胁车辆行车安全。结合整车的动力学仿真,建立了轴箱弹簧断裂过程的力学模型,对整个断裂过程进行仿真,模拟了轴箱弹簧突然断裂工况下车辆动力学性能变化,分析了轴箱弹簧断裂条件下车辆直线行车安全性以及曲线通过安全性。计算分析结果表明:轴箱弹簧突然断裂导致一系悬挂刚度剧变,引起轮轨垂向力先减小后增大,轮重减载率、脱轨系数等参数增大直至超限,但对轮轨横向力影响不大。     

基于深度学习的破碎带盾构施工沉降预测分析

为进一步提高复杂地层条件下盾构沉降预测的准确性，以广州地铁7号线1期工程谢村站-钟村站区间盾构工程为依托，针对破碎带盾构隧道沉降控制难题，提出基于深度学习的人工智能预测模型。通过分析开挖面破碎带分布规律，确定将破碎带面积比作为地层特性参数。采用相关系数矩阵分析不同施工参数与破碎带面积比的相关性，确定采用刀盘转矩代表破碎带面积比实时描述地层分布特性。以刀盘转矩、盾尾间隙与注浆量作为输入值，地面沉降作为输出值训练深度学习模型，并利用训练后的深度学习模型进行沉降预测分析。通过分析预测结果与沉降实测值的对比验证预测模型的有效性。     

碱矿渣胶凝材料的开裂性能研究

碱矿渣胶凝材料是具有高强、高耐久性的胶凝材料,但其收缩大,易开裂,是阻碍其广泛应用的主要原因.通过圆环法研究了MgO膨胀剂、聚丙烯纤维和减缩剂单掺或复掺对碱矿渣胶凝材料开裂性能的影响.研究结果表明:单掺MgO膨胀剂对碱胶凝体系抗裂不利,减缩剂和聚丙烯纤维的掺入能够有效延缓裂缝的形成,减小开裂面积.     

对于现行公路隧道工程定额的思考和建议

针对在设计及后续服务过程中关于隧道造价方面发现的问题和争议,对2007版《公路工程预算定额》、《公路工程概算定额》提出了笔者的想法,对定额修编工作提出了一些建议。     

半潜式钻井平台用三滚筒锚机研制

针对目前国内半潜式钻井平台配套用三滚筒式锚机研究文献较少的现状,开展三滚筒锚机的设计研究。该锚机最大额定拉力1 700 kN,容绳量3 500 m,结构采用双滚筒摩擦绞车和储存绞车配合形式,可满足1 200 m水深半潜式钻井平台应用。文中着重介绍了主要设计原理,并进行详细的校核计算及关键部件有限元分析,结论证明该设计合理,使用可靠且安全。