超声冲击处理对高强钢焊接接头残余应力影响的数值模拟

超声冲击处理(UIT)是一种有效的焊后改善焊接接头疲劳性能的工艺措施,其借助机械撞击和超声振动的共同作用,使焊趾表面产生塑性变形从而引入有益的压缩残余应力。为评价UIT技术对焊接接头残余应力的影响,该文提出了一套新的数值分析方法,包括焊接数值模拟及随后的超声冲击处理过程的动态弹塑性有限元分析。在有限元模型中考虑了实际的工艺参数和超声促成的材料软化效应。以船用高强钢AH36非承载十字焊接接头为研究对象,将预测的超声冲击处理前后的残余应力分布与实验结果进行对比,两者有较好的吻合。在此基础上,探讨了静态预载荷对超声冲击处理态残余应力再分布的影响。     

船体板格极限强度数值计算影响因素及敏感分析

船体板格极限强度的有限元计算方法应用广泛,但其计算方法具有一定的不稳定性,计算结果受多种因素的影响.本文针对船体板格有限元计算方法的不稳定性进行研究,通过将有限元计算结果与其他学者的研究成果进行对比,验证本文所采用的有限元方法的可靠性,然后针对板格材料、初始缺陷、网格密度、边界条件等几种因素的敏感性进行具体研究,发现理想应力应变关系会使得结果偏于危险.网格形状和网格密度对于结果均有影响,边界条件对于有限元结果有影响,最大误差在7.2%,并且模型3会使得结果偏于危险.初始缺陷是一敏感因素,最大误差在20%,因此需要根据实际缺陷选取合适的屈曲模态和比例因子.     

基于任务需要的海警大型舰艇基本需求建模与分析

以线性和非线性需求结合方式建立了以满足任务需要为条件的海警大型舰艇基本需求组合模型,预测计算了多个样本国海警大型舰艇基本需求数,结果表明该模型有一定的实用性.据此对中国海警大型舰艇基本需求进行预测,预测结果可对中国海警大型舰艇发展规划提供参考.     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

典型地铁站台射频天线电磁暴露安全评估

为有效评估典型地铁站台射频天线对乘客电磁暴露的安全性,设计地铁站台无线通信系统吸顶天线和乘客人体模型,利用基于有限元的电磁仿真软件,构建吸顶天线辐射下的地铁站台乘客候车电磁环境模型,研究候车乘客的公众电磁暴露问题。结果表明:天线分别工作在900和2 440 MHz时,人体组织的平均比吸收率最大值分别为4.441×10-7和1.165×10^-6W·kg^-1,电场强度最大值分别为0.139和0.148V·m^-1,平均比吸收率在人体组织内的衰减均大于电场强度的衰减;2 440MHz时的射频电磁能量在颅内的穿透能力小于900MHz时;所有计算值均低于国际非电离辐射委员会制定的公众电磁暴露限值,说明地铁站台射频天线对乘客的电磁暴露不会构成健康威胁。     

青岛地铁蓄电池工程维护车车钩挂梁结构设计

文章分析了青岛地铁2号线蓄电池工程维护车出现车钩"低头"现象的原因,并给出了一种通过加装车钩挂梁结构以支撑车钩的解决方案。文章还对挂梁结构进行了强度校核,确保该结构满足实际工况需求。     

Fueling for contingencies: The hidden cost of unpredictability in the air transportation system

The aviation community is increasing its attention on the concept of predictability when conducting aviation service quality assessments. Reduced fuel consumption and the related cost is one of the various benefits that could be achieved through improved flight predictability. A lack of predictability may cause airline dispatchers to load more fuel onto aircraft before they depart; the flights would then in turn consume extra fuel just to carry excess fuel loaded. In this study, we employ a large dataset with flight-level fuel loading and consumption information from a major US airline. With these data, we estimate the relationship between the amount of loaded fuel and flight predictability performance using a statistical model. The impact of loaded fuel is translated into fuel consumption and, ultimately, fuel cost and environmental impact for US domestic operations. We find that a one-minute increase in the standard deviation of airborne time leads to a 0.88 min increase in loaded contingency fuel and 1.66 min in loaded contingency and alternate fuel. If there were no unpredictability in the aviation system, captured in our model by eliminating standard deviation in flight time, the reduction in the loaded fuel would between 6.12 and 11.28 min per flight. Given a range of fuel prices, this ultimately would translate into cost savings for US domestic airlines on the order of $120–$452 million per year.     

在建盾构隧道突发管片破损病害成因分析及治理措施研究北大核心CSCD

盾构法广泛应用于我国城市轨道交通隧道的建设中,盾构管片的病害问题也越发受到重视。文章针对某地铁在建盾构隧道突发管片破损病害,绘制了管片破损病害展布图,分析了相关资料和检测数据,明确了病害的成因机理,制定并实施了相应治理措施。研究结果表明:管片背后大范围空洞导致围岩对隧道的约束不足,引起已成型隧道在盾构机反推力和扭矩、同步注浆浆液浮力、刀盘水土压力和扭矩等作用下发生类压杆弯扭失稳是导致该病害的主要原因;隧道变形监测数据表明"背后注浆填充+破损部位修复"两阶段治理措施取得了良好的治理效果;盾构隧道施工过程中,应严格管控同步注浆质量,防止隧道轴线偏移引起盾构管片发生开裂破损等病害。     

洋山深水港区进港海堤变形观测及分析

为了解洋山深水港区西港区A区陆域形成对进港海堤的影响,自2006年10月初开始对进港海堤进行变形观测,此项工作至今仍在观测中.根据2006年10月至2007年12月,15个月的观测资料,阐述东海大桥进港海堤的变形观测方法与精度,同时,结合地质资料分析变形观测的数据.     

拓扑优化技术在拱式纵梁码头结构中的应用

近年来,结构拓扑优化设计已成为结构优化研究领域的热点。针对新型的拱式纵梁码头结构,基于ANSYS有限元理论,采用拓扑优化方法对拱式纵梁的拱轴线线型进行选择,将得出的拱轴线应用于拱式纵梁码头结构中。通过实例证明了拓扑优化生成的拱轴线的合理性及其在工程应用中的可行性。