船体舷侧大面积换板应注意的几个问题

对于20年以上船龄的散货船,在船体舷侧板大面积割换前,应将货舱内影响纵横强度的项目结束,并调整压载后,方能开工。割换范围、分片划分、工艺步骤、焊接顺序应科学合理,利于预防和控制船体整体变形、局部外板变形、焊缝裂纹等,从而确保修船质量。     

高强钢筋混凝土非线性力学模型研究

针对高强钢筋混凝土非线性分析，对非线性分析中裂缝的模拟、钢筋混凝土材料本构关系及其非线性问题求解方法的改进进行研究，提出了适用于高强混凝土的本构曲线，并将混合法用于非线性问题，为高强钢筋混凝土梁非线性分析提供了理论基础。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

模拟异种钢接头蠕变力学特性的数值分析

利用有限元数值模拟了高强匹配异种的接头在弹性－蠕变条件下的应力／应变场，结果表明，接头的应力／应变分布不均匀，在焊缝界面上，应力和应变分别呈不连续和不协调分布特性，并随着拦头各区蠕变强度差别的增大，其分布梯度增大，峰值应力／应变提高，因此，蠕变强度梯度大的高强焊缝和低强母材的界面是接头的薄弱部位。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

应用复合梁单元实现钢管混凝土拱桥的极限承载力分析

进行大跨度钢管混凝土拱桥的极限承载力分析,需要综合考虑几何和材料非线性、混凝土收缩和徐变、温度变化等多种因素的影响。本文从固体力学的基本理论出发,建立适于考虑上述诸多因素的复合梁单元,阐述了基于该单元的钢管混疑土拱桥极限承载力分析程序的实现方法,并通过与一个哑铃形截面钢管混凝土组合式拱肋极限承载力试验结果的对比验证了其可行性。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

薄壁箱梁剪滞剪切效应自振特性分析

在推导考虑剪力滞、剪切变形双重效应的单元刚度矩阵与等效结点荷载矩阵的基础上[1],进一步推导出考虑双重效应的单元质量矩阵,从而形成完整的薄壁箱梁考虑双重效应的矩阵分析体系,可方便地纳入矩阵位移法程序系统,为常见的薄壁连续梁等复杂结构的剪力滞效应分析提供一种计算手段。利用自编程序ZLBOX对薄壁箱型简支梁和悬臂梁考虑剪力滞、剪切变形双重效应时的自振特性进行了分析,所得结果与ANSYS实体单元计算结果符合良好。计算结果表明,剪力滞、剪切变形双重效应使薄壁箱梁的自振频率降低,剪力滞效应占双重效应的85%以上,双重效应对高阶频率的影响比低阶频率的影响大。