变截面薄壁空心墩几何非线性分析

用能量法对变截面薄壁空心墩进行几何非线性分析,通过考虑和不考虑几何非线性两种情况进行对比计算,计算结果表明几何非线性对变截面空心墩的影响随着墩高的增加而增大,但其增大的幅度不是很大,当墩的长细比较大时,几何非线性的影响不能忽略。     

杭州湾跨海大桥水中低墩区钢管桩设计

结合杭州湾跨海大桥水中低墩区自然环境条件,对该区域桥梁钢管桩设计思路做了较详细的说明,包括从钢管桩设计方案的选择到钢管桩细部构造的设计思路,结构受力的理论计算,施工、制造工艺水平等方面。     

矮墩宽箱连续刚构桥设计

文章结合广西八尺江大桥建设的工程实例,介绍如何利用二三维有限元电算程序对矮墩宽箱连续刚构桥进行施工和成桥阶段的计算分析,从而达到满足宽箱(18·5m)、矮墩(12·5m)的设计要求。     

天津西南环线铁路钢横梁框架墩设计

当前,新建铁路临近市区或车站地段,往往铁路密集、纵横交错,新建线路与既有铁路、公路小角度交叉的情况不可避免;加之临近车站时线路纵断面抬高困难,需严格限制上跨线路的结构建筑高度.钢横梁框架墩的建筑高度较低,而横向跨度相对较大,是此类工点较好的解决方案.本文介绍了钢横梁框架墩的结构特点,分析比较了不同的墩顶固结方式,并总结了设计注意事项.     

墩台施工监理中的若干问题

针对工程的特殊性 ,管理人员在质量控制方面及相关协调工作方面进行了必要的调整和大胆尝试 ,最终促成该项目的圆满完成。     

耗能防撞装置在桥墩基底摇摆隔震中的性能研究

在桩基桥墩基底摇摆隔震中，提出一种增加柔性耗能防撞装置设计方案。当罕遇地震发生时，桥墩在与基础分离处发生摇摆，与设计的防撞装置发生碰撞，延长了系统的撞击时间，使撞击力下降。利用多个钢绳柔性防撞圈同期作用的动态有限元方法建立模型，对防护围刚度分三种情况进行讨论，发现在撞击防撞装置的过程中，前期为部分防撞圈发挥作用，后期为全部防撞圈发挥作用，且“同期作用历时”越短越好。分析结果表明，降低防撞构件的初始刚度，可延迟最大撞击时间，同时可减小最大的撞击压力。     

某下穿通道快速化预制拼装工艺总体设计方案

随着国家城市化进程的不断加快,传统现浇工艺存在着施工质量相对较差、对周边环境影响较大、劳动力成本不断上升等一系列问题,与国家提出的高质量发展目标存在一定差距,为此国家从政策方面开始推行预制拼装工艺。以某斜交下穿通道工程采用预制拼装工艺为例,从结构分块、接缝形式及防水、吊点布置等关键环节进行了系统性的研究与探讨,提出了一整套的设计方案,为工程的建成提供了有力的技术支撑,同时也为类似工程提供了有意义的参考借鉴。     

The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

长寿柔性基层沥青路面的极限应变

长寿柔性路面设计通常采用沥青层底极限拉应变和土基顶部极限压应变作为控制指标。现阶段极限应变指标参照室内试验结果确定，且数值相对固定。而现场路面结构层应变响应值受结构厚度、荷载、环境作用（温度及老化）等因素的影响，在服役过程中不断演化。以2条服役超过35年的柔性路面结构（屯门公路与吐露港公路）为基础，分析了不同服役阶段路面结构层在不同荷载、环境作用下的极限应变响应，探讨了柔性路面极限应变的大概范围。研究结果表明：在初始服役状态下，屯门公路高温状态下沥青层底的极限拉应变为376×10^-6，土基顶部极限压应变为562×10^-6；低温状态下上述极限应变分别降为87×10^-6，249×10^-6；吐露港公路高温状态下沥青层底、土基顶部极限应变分别为149×10^-6，324×10^-6，低温状态下上述应变分别降为50×10^-6，156×10^-6。在经过长期服役后，老化状态下2类路面沥青层底拉应变及土基顶部压应变均大幅降低。屯门公路在使用36年后，某些路段出现零星的疲劳破坏，而吐露港公路则没有发现疲劳破坏。极限应变计算结果表明，路面关键位置的应变受荷载、沥青层厚度、温度和沥青层老化状态等多因素的影响。因此，在进行长寿柔性基层路面设计中，荷载、沥青层厚度、温度及沥青层老化状态等因素都应该考虑在内。     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.