Policy innovations of the US intermodal surface transportation efficiency act and clean air act amendments

In combination, the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) and the Clean Air Act Amendments of 1990 (CAAA) are innovative and aggressive efforts to move US cities toward integrated transportation and air quality planning. Under these complementary laws, air quality has become a major national transportation goal. In areas with serious air pollution, air quality will be a major consideration in determining the future shape of urban transportation.This paper considers how the CAAA and ISTEA combine to provide an innovative national policy approach of interest to countries seeking to encourage sustainable development in urban centers. The CAAA mandates measurable and enforceable air quality targets. Nation-wide standards are set for acceptable levels of carbon monoxide, ground level ozone, and small particulates. ISTEA includes directions for transportation planners and decision-makers to follow to reach air quality and other goals — transportation planning must emphasize system efficiency, and for cities with severe air pollution, transportation projects are expected to contribute to cleaner air. Each urban area has flexibility in how it applies this framework to reflect its priorities and solve its problems. Strict federal sanctions provide incentives for compliance with both laws.Enactment of these laws has produced a period of transition and uncertainty as well as of challenge and opportunity for planners and elected officials. The next several years, the US will provide one national laboratory and over 100 different urban laboratories for innovative approaches to integrate transportation and environmental policies to resolve major urban problems.Abbreviations CAAA Clean Air Act Amendments of 1990 - CO Carbon monoxide - ECO Employee Commute Option - EPA US Environmental Protection Agency - HC Transportation hydrocarbons - I/M Inspections and maintenance program - ISTEA Intermodal Surface Transportation Efficiency Act of 1991 - MPO Metropolitan planning organizations - NO_x Nitrogen oxides - PPM Parts per million - PM₁₀ Small particulate matter - SIP State Implementation Plan - TIP Transportation Improvement Program - TCM Transportation control measures - VMT Vehicle miles traveled     

用准定常升力线理论预报螺旋桨在非均匀流场中的性能

本文应用准定常升力线理论预报船用螺旋桨的性能,建立了适合中型计算机的程序。通过四个桨模的敞水试验和性能计算结果比较表明,对于计算螺旋桨的推力与转矩系数,只要应用升力线理论加上简单的粘性经验修正及升力面影响修正,不必作边界层计算即可得到比较满意的结果。伴流场中单个叶片推力与转矩脉动计算表明,用升力线作计算时,伴流产生的水流弯曲对推力、转矩脉动有较明显的影响,对推力偏心度则影响不大,计算所得的推力、转矩脉动可供计算主机扭振及轴系振动的外力作参考。     

Studies on the optimization of stern hull form based on a potential flow solver

A hypothesis of the minimum energy of secondary flow, suggested by Bessho, is introduced here. According to this hypothesis, it can be expected that hull forms having frame lines with a minimum energy of secondary flow show less form drag. In the first part of this article, secondary flow energy is evaluated for the cases with and without a free-surface effect, and Bessho’s hypothesis is confirmed for practical hull forms. Then optimization methods for the stern hull form are suggested, in which a nonlinear optimization technique is introduced. Numerical examples are given for a practical tanker hull form and a practical container hull form. From these studies, the suggested optimization method can be confirmed as a simplified and practical design method to the select frame lines of stern hull forms.     

国外海军多功能一体化隐形桅杆研究应用现状

随着现代作战舰艇探测设备、通信设备及电子战设备的增加,其电磁兼容和电磁隐蔽问题日益成为影响舰艇作战效能和生存能力的主要问题.为此,针对各种不同探测、通信及电子战设备研究设计一种多功能复合隐形桅杆势在必行.该文论述了美国、英国、意大利、荷兰海军在此方面的研究和应用现状.     

路面激励下的6700客车动力总成悬置系统性能分析

针对6700客车动力总成悬置系统在路面激励下的隔振性能进行了分析评估。建立了用于动力总成悬置系统性能分析的13自由度整车系统动力学模型,分析了系统的模态属性,重点讨论了考虑路面随机激励下的动力总成振动响应。对悬置系统隔振性能较差的问题进行了分析,找到了问题的主要原因是车架和悬置子系统存在沿Z向激励下的模态耦合。     

中涂漆的耐水性对面漆起泡的影响

简要介绍面漆起泡的原因以及防治措施,主要通过涂层的耐水性试验,分析并说明中涂层耐水性对面漆起泡的影响。     

浅谈降低SMA改性沥青路面面层离析质量控制

该文以珠海市港湾大道(金顶转盘至金塘路口段)改道工程为例,介绍了在使用SMA改性沥青路面过程中,为降低其面层的离析问题,而采取的各项技术措施,可供同行参考。     

Sideslip angle estimation based on input–output linearisation with tire–road friction adaptation

An adaptive sideslip angle observer considering tire–road friction adaptation is proposed in this paper. The single-track vehicle model with nonlinear tire characteristics is adopted. The tire parameters can be easily obtained through road test data without using special test rigs. Afterwards, this model is reconstructed and a high-gain observer (HGO) based on input–output linearisation is derived. The observer stability is analysed. Experimental results have confirmed that the HGO has a better computational efficiency with the same accuracy when compared with the extended Kalman filter and the Luenberger observer. Finally, a road friction adaptive algorithm based on vehicle lateral dynamics is proposed and validated through driving simulator data. As long as the tires work in the nonlinear region, the maximal friction coefficient could be estimated. This algorithm has excellent portability and is also suitable for other observers.     

An efficient approach to the analysis of rail surface irregularities accounting for dynamic train–track interaction and inelastic deformations

A two-dimensional computational model for assessment of rolling contact fatigue induced by discrete rail surface irregularities, especially in the context of so-called squats, is presented. Dynamic excitation in a wide frequency range is considered in computationally efficient time-domain simulations of high-frequency dynamic vehicle–track interaction accounting for transient non-Hertzian wheel–rail contact. Results from dynamic simulations are mapped onto a finite element model to resolve the cyclic, elastoplastic stress response in the rail. Ratcheting under multiple wheel passages is quantified. In addition, low cycle fatigue impact is quantified using the Jiang–Sehitoglu fatigue parameter. The functionality of the model is demonstrated by numerical examples.     

Effective assessment of tyre–road friction coefficient using a hybrid estimator

Vehicle stability and active safety control depend heavily on tyre forces available on each wheel of a vehicle. Since tyre forces are strongly affected by the tyre–road friction coefficient, it is crucial to optimise the use of the adhesion limits of the tyres. This study presents a hybrid method to identify the road friction limitation; it contributes significantly to active vehicle safety. A hybrid estimator is developed based on the three degrees-of-freedom vehicle model, which considers longitudinal, lateral and yaw motions. The proposed hybrid estimator includes two sub-estimators: one is the vehicle state information estimator using the unscented Kalman filter and another is the integrated road friction estimator. By connecting two sub-estimators simultaneously, the proposed algorithm can effectively estimate the road friction coefficient. The performance of the proposed estimation algorithm is validated in CarSim/Matlab co-simulation environment under three different road conditions (high-μ, low-μ and mixed-μ). Simulation results show that the proposed estimator can assess vehicle states and road friction coefficient with good accuracy.