浅析既有电气化铁道接触网施工的方法

结合京沪线较详细地介绍了既有电气化铁道接触网改造工程的主要施工方法,即采用“利用既有,永临结合”的施工方法,并提出了行之有效的过程控制措施。     

真空热处理提高滚丝轮寿命试验研究

本文通过对两种型号的滚丝轮分别进行真空热处理和箱式炉热处理,并进行现场寿命对比试验及分析,得出真空热处理滚丝轮寿命比箱式炉滚丝轮寿命分别提高60％和140％。标准件厂冷镦车间采用真空热处理滚丝轮一年能节约模具费50万元以上,具有明显的经济效益;真空热处理可广泛用于表面质量要求高,变形小,精密的工模具处理。     

共轭曲面第二类问题的数字仿真

已知两曲面，在既定的位置条件下，求传动的接触域及速比关系属于共轭曲面的第二类问题，也是该领域的难点问题之一，用传统的方法解决起来非常复杂．论文提出一种数字仿真新方法，以现代计算技术为手段，可充分模拟包含位置误差因素在内的齿面的真实接触，并获得实际速比关系．论述其原理与计算过程，并给出阿基米德蜗杆传动的具体算例．     

一种平面二次包络环面蜗轮副的特征建模方法

平面二次包络环面蜗轮副三维实体属复杂曲面造型，文章在坐标变换公式的基础上，讨论了环面蜗杆螺旋齿面方程，建立了环面蜗杆螺旋线参数方程，并用VBA编程建模．按此建模，用平面包络环面蜗杆产型齿的特征模型，在MDT6．0三维绘图软件环境中实现平面包络环面蜗杆和二次包络蜗轮副的三维建模，并以断面图检验了其良好的接触啮合状态．所生成的实体模型具有给定参数的数字信息，可用于此类环面蜗杆的齿廓形状分析和进一步应用研究．     

几种自升式平台桩土作用有限元简化方法的比较

文章以某一自升式海洋平台桩腿结构作为研究对象,在分析环境载荷作用下自升式海洋平台桩腿—土相互作用机理的基础上,结合通用有限元软件ANSYS,对于如何在有限元建模中正确地考虑桩腿—土的相互作用的问题进行了研究,建立了完整的海洋平台桩腿模型,并分别采用了三种不同的有限元建模方法来模拟土层和桩腿之间的相互作用,通过有限元计算结果与实际检测样本数据的比较,分析了三种简化方法的准确性和可行性。     

规则迎浪中船舶参数横摇的三维时域预报方法研究

参数横摇是船舶因复原特性改变而引起的典型非线性现象。文章采用三维时域方法预报规则迎浪中船舶的参数横摇运动。该方法引入匹配面将流域分为内域和外域,内域中采用Rankine源来满足物面条件和线性自由面条件,而外域中应用时域格林函数来满足线性自由面条件和远场辐射条件。数值方法中,Froude-Krylov力和恢复力是通过对船舶瞬时湿表面积积分获得,同时考虑了横摇、垂荡和纵摇三自由度之间的耦合作用,以及非线性横摇阻尼的影响。数值结果与试验结果吻合很好,说明该方法可以有效地预报参数横摇。     

质子交换膜燃料电池接触电阻研究进展

质子交换膜燃料电池(PEMFC)接触电阻问题是制约其商业化发展的一个重要因素。影响接触电阻的因素可归纳为电池材料、组装参数、工作参数和其他因素。本文主要介绍了PEMFC的接触电阻及其影响因素,并综述了降低接触电阻的方法。     

Numerical analysis of the dynamic interaction between wheel set and turnout crossing using the explicit finite element method

A three-dimensional (3-D) explicit dynamic finite element (FE) model is developed to simulate the impact of the wheel on the crossing nose. The model consists of a wheel set moving over the turnout crossing. Realistic wheel, wing rail and crossing geometries have been used in the model. Using this model the dynamic responses of the system such as the contact forces between the wheel and the crossing, crossing nose displacements and accelerations, stresses in rail material as well as in sleepers and ballast can be obtained. Detailed analysis of the wheel set and crossing interaction using the local contact stress state in the rail is possible as well, which provides a good basis for prediction of the long-term behaviour of the crossing (fatigue analysis). In order to tune and validate the FE model field measurements conducted on several turnouts in the railway network in the Netherlands are used here. The parametric study including variations of the crossing nose geometries performed here demonstrates the capabilities of the developed model. The results of the validation and parametric study are presented and discussed.     

A survey of wheel–rail contact models for rail vehicles

Accurate and efficient contact models for wheel–rail interaction are essential for the study of the dynamic behaviour of a railway vehicle. Assessment of the contact forces and moments, as well as contact geometry provide a fundamental foundation for such tasks as design of braking and traction control systems, prediction of wheel and rail wear, and evaluation of ride safety and comfort. This paper discusses the evolution and the current state of the theories for solving the wheel–rail contact problem for rolling stock. The well-known theories for modelling both normal contact (Hertzian and non-Hertzian) and tangential contact (Kalker's linear theory, FASTSIM, CONTACT, Polach's theory, etc.) are reviewed. The paper discusses the simplifying assumptions for developing these models and compares their functionality. The experimental studies for evaluation of contact models are also reviewed. This paper concludes with discussing open areas in contact mechanics that require further research for developing better models to represent the wheel–rail interaction.     

Influence of wheel and rail profile shape on the initiation of rolling contact fatigue cracks at high axle loads

The influence of wheel and rail profile shape features on the initiation of rolling contact fatigue (RCF) cracks is evaluated based on the results of multi-body vehicle dynamics simulations. The damage index and surface fatigue index are used as two damage parameters to assess the influence of the different features. The damage parameters showed good agreement to one another and to in-field observations. The wheel and rail profile shape features showed a correlation to the predicted RCF damage. The RCF damage proved to be most sensitive to the position of hollow wear and thus bogie tracking. RCF initiation and crack growth can be reduced by eliminating unwanted shape features through maintenance and design and by improving bogie tracking.