轿车覆盖件拉延动态仿真及成形性分析

结合丰田轿车前围板拉延成形过程的数值模拟，探索了轿车覆盖件拉延成型数值模拟的一般过程。利用ETA／DYNAFORM软件对前围板进行了拉延过程的模拟，针对压边力、凸凹模圆角、拉深筋设置及坯料形状进行了优化设计，消除了拉裂及起皱现象，提出了模拟过程中应注意的问题及解决方法。     

横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

球扁钢肋骨三角形加热仿真研究

针对球扁钢肋骨三角形加热矫正纵向弯曲变形,利用ANSYS软件和APDL语言编写仿真程序,实现了热-结构耦合场的数值模拟,得到了加热过程中温度场和结构场的求解结果。对于不同的加热速度与气流输入量,计算了肋骨表面最高温度和高度方向的变形量,利用MATLAB曲面拟合,得到了最高温度和变形量关于加热速度和气流流量的函数。并对这两个参数进行了优化,得到了满足温度约束下变形量最大的参数组合。研究内容和结果对球扁钢肋骨三角形加热的更深入研究和现场施工提供了一定的参考和指导。     

用于驱动地铁车辆的直线电机的能量损失分析

指出直线电机作为地铁列车的推进部件,存在运行效率不高、能量损耗大的问题;从经济运行的角度出发,说明研究直线电机的能量损失、提高其运行效率是很有意义的工作。对应用于驱动地铁车辆的直线电机的工作原理进行简要介绍,并对其运行过程当中的能量损失进行初步分析。     

铁路货车轴端发电机技术研究

在我国铁路货车重载提速的背景下,采用电空制动、智能电子监测及运行安全在线监测的需求日益突显.但是受我国铁路货车运用维护体制制约,既有车辆均未安装供电装置,致使电子设备无法应用.因此提出一种安装于车轴端部的轴端发电机技术解决方案,但由于车轴端部冲击振动大、发电机体积限定要求高、发电机轻量化要求高、外部环境恶劣、温升要求苛...     

城市轨道交通ATS系统外部接口日志分析

青岛地铁11号线采用的是国内自主研发的自动列车监控系统(ATS),ATS系统作为一个综合信息监控系统的实现平台,以通信前置机作为通信枢纽,与时钟系统、乘客信息系统、广播系统、综合监控系统、无线系统等实现接口.现结合现场实际运行数据,采用UltraEdit文本编辑工具对通信前置机的日志进行检索、分析,通过系统后台的日志分...     

某工程工业厂房地基处理试验研究

主要通过竖向抗压静载试验得出该场地内钢筋混凝土预制方桩的单桩极限承载力为2 150 kN;单桩水平临界荷载可取50 kN。桩身内力测试表明该种桩型的荷载主要由侧摩阻力承担,为端承摩擦桩;侧摩阻力由上至下分布不匀;桩端在极限状态时才发挥出较大端阻力。承台下反力测试分析表明在分级荷载作用下承台中心轴线剖面土反力分布总体特征呈现外缘大、中间小的趋势,实测承台底部最大地基土反力为0.246 MPa。     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

An algorithm for oceanic front detection in chlorophyll and SST satellite imagery

An algorithm is described for oceanic front detection in chlorophyll (Chl) and sea surface temperature (SST) satellite imagery. The algorithm is based on a gradient approach: the main novelty is a shape-preserving, scale-sensitive, contextual median filter applied selectively and iteratively until convergence. This filter has been developed specifically for Chl since these fields have spatial patterns such as chlorophyll enhancement at thermohaline fronts and small- and meso-scale chlorophyll blooms that are not present in SST fields. Linear Chl enhancements and localized (point-wise) blooms are modeled as ridges and peaks respectively, whereas conventional fronts in Chl and SST fields are modeled as steps or ramps. Examples are presented of the algorithm performance using modeled (synthetic) images as well as synoptic Chl and SST imagery. After testing, the algorithm was used on > 6000 synoptic images, 1999–2007, to produce climatologies of Chl and SST fronts off the U.S. Northeast.     

海底柔性管道技术研究

随着海洋油气勘探开发的发展,柔性管道得到越来越广泛的应用。文中介绍了柔性管道的分类及结构,重点描述了粘结和无粘结柔性管道,无粘结柔性管道是目前国外发展趋势和研究重点。阐述了柔性管道的技术优势以及适用范围,同时介绍了柔性管道的发展状况、设计准则以及国外的主要制造厂商。国内柔性管道技术与世界先进水平之间还存在较大的差距,采用无粘结技术以及适用超深水环境将是国内未来深水海底柔性管道技术发展的方向。