汽油机缸内直喷的关键技术和发展现状

讨论了缸内直喷发动机的优缺点和当前对该种发动机出了要求，认为缸内直喷技术的关键是掌握和控制好混合气浓度在空间的分布和随时间的变化，其控制是在一定的喷油，点火控制策略下靠燃油射系统与缸内流场的合理匹配实现的，阐述了缸内直喷对上述两个方面提出的要求，并讨论了发动机排放及其解决方法。     

燃油带电荷辅助雾化的激光全息摄影研究

利用发动机点火线圈次级电压作为脉冲电源，在发动机稳流气道试验台上模拟１７５单缸机的进气，用ＹＳＣ－１型运动粒子瞬态激光全息测试仪折摄了燃油油滴带电雾化和不带电雾化的粒子全息图，经再现后得到实际的粒子图，编制了专用软件进行粒子图像处理和粒径统计分布，统计结果证明燃油油滴带电后粒子粒径约减少了３／４倍左右，改善了雾化效果。     

形成零件组和建立成组生产单元的“生产流程—分类编码”聚类分析法

本文提出了一种利用模糊聚类分析法形成零件组和建立机床组的新方法,实现了生产流程分析法与编码分类法的综合.对于成组加工单元,本文把设备负荷与零件相似系数一起作为形成成组加工单元的主要因素,获得了合理的零件组和机床组,并具有良好的柔性和计算性.     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

国Ⅳ之后柴油机三种燃油喷射系统对比及其技术发展趋势

系统地介绍了电控泵喷嘴系统、电控单体泵系统、电控共轨系统的结构及牛寺｜点。阐述了电控燃油喷射系统的技术发展趋势。     

喷油泵装配线中拧紧技术的研究及应用

本论文介绍了拧紧技术的原理和方法,以及拧紧技术在喷油泵装配线中的应用.最后说明了拧紧程序在喷油泵装配线中的程序防错方法.     

Comparing rail fuel efficiency with truck and waterway

This paper presents a railroad energy efficiency model used to estimate the fuel economies for classes of trains transporting various commodities. Comparable procedures are used to estimate truck and waterway fuel consumption. The results show that coal unit trains are 4.5–5.0 times more energy efficient than movements in the largest trucks allowed in the eastern and western regions of the US, unit grain train movements in the central US are 4.6 times more fuel efficient, soda ash unit train and non-unit train shipments are 4.9 and 3.2 times more efficient, and ethanol unit train and non-unit train movements are 4.8 and 3.0 times more efficient. In terms of barge traffic, coal unit train and non-unit train are 1.3 and 0.9 times as energy efficient in the eastern US, grain unit train and non-unit train movements are 1.7 and 1.0 times more efficient from Minneapolis to the Gulf of Mexico, and grain unit train and non-unit train movements are 1.0 and 0.7 times more fuel efficient from the Upper Ohio River to the Gulf of Mexico.     

An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.     

Combustion development of a Bi-Fuel engine

Environmental improvement and energy issues are increasingly becoming more important as worldwide concerns. Natural gas is a good alternative fuel that can help to improve these issues because of its large quantity and clean burning characteristics. This paper provides the experimental performance results of a Bi-Fuel engine that uses Compressed Natural Gas as its Primary fuel and gasoline as its secondary fuel. This engine is a modification of the basic 1.4-liter gasoline engine. Generally, on the unmodified base engine, torque and power for CNG fuel are considerably lower than gasoline fuel. In this paper, the influence of fuels on wall temperature, performance and emissions are investigated.     

电动燃油泵换向器磨损原因分析和解决方案

由于乙醇汽油的应用，电动燃油泵的铜换向器磨损加速，严重影响了该产品的寿命，本文对磨损加速的原因进行分析，并提出解决方案。