电控气缸注油器注油调频控制机理分析

为实现电控气缸注油器的注油调频控制,探究其注油调频的计算方法,提出注油调频的通用计算公式,分析该计算公式在研发电控气缸注油器注油调频机理上的适用方法。     

The Downs–Thomson Paradox with responsive transit service

Downs (1962) and Thomson (1977) suggested that highway capacity expansion may produce counterproductive effects on the two-mode (auto and transit) transport system (Downs–Thomson Paradox). This paper investigates the occurrence of this paradox when transit authority can have different economic objectives (profit-maximizing or breakeven) and operating schemes (frequency, fare, or both frequency and fare). For various combinations of economic objectives and operating schemes, the interaction between highway expansion and transit service is explored, as well as its impact on travelers’ mode choices and travel utilities. Further, for each combination, the conditions for occurrence of the Downs–Thomson Paradox are established. We show that the paradox never occurs when transit authority is profit-maximizing, but it is inevitable when the transit authority is running to maximize travelers’ utility while maintaining breakeven. This is because the former transit authority tends to enhance transit service (e.g., raise frequency or reduce fare) when facing an expanded highway; and on the contrary, the latter tends to compromise transit service (e.g., reduce frequency or raise fare). Both analytical and numerical examples are provided to verify the theoretical results.     

Surface patterns of zooplankton spatial variability detected by high frequency sampling in the NW Mediterranean. Role of density fronts

High frequency sampling was performed in daylight hours along a 35 km transect in the Ligurian Sea to investigate the upper layer zooplankton distribution during the spring phytoplankton bloom. The results show detailed spatial structure and biomass of key zooplankton functional groups, copepods, salps and krill larvae, within the different water masses characterizing this region. Although observed values of total copepod biomass distribution were rather constant along the transect, species-specific patterns were observed in the copepod spatial distribution. The larger species Calanus helgolandicus, as well as Centropages typicus, Oithona spp., and Oncaea spp., were associated with the frontal zone. However, Acartia spp. had a scattered distribution, and Clausocalanus/Paracalanus did not have a clear pattern. In addition, krill larvae were concentrated in the frontal area and salps had a scattered pattern. The cross-shore zooplankton distribution appeared strongly influenced by both the Northern Ligurian current governing inshore waters, which acts as a major flushing forcing, and the Ligurian front, which governs offshore waters and may act as retention area for zooplankton.     

新型单相谐振阻抗型混合电力滤波器的研究

为了进一步降低混合电力滤波器的有源滤波器容量,采用了一种新的混合电力滤波器的拓扑结构。新拓扑结构的基本思想是增加了和有源电力滤波器(APF)并联的LC基波谐振支路,并将APF控制成受控谐波电流源。LC基波谐波支路使得有源电力滤波器的额定电压和电流大大降低。分析了新型单相谐振阻抗型混合电力滤波器的工作原理及滤波特性。通过MATLAB/Simulink仿真,验证了新型单相谐振阻抗型混合电力滤波器的滤波特性。仿真结果表明这种新型混合电力滤波器具有优良的滤波性能。     

柴油机曲轴速度变化的频谱分析

使用光电转速传感器,通过计算其感应器内部时钟的脉冲测量曲轴的速度变化,分析低谐波转速变化能过滤出由曲轴的动力响应产生的失真,根据这些谐波携带的信息建立起测量数据和发动机平均气压转矩之间的关系,从而发现故障并且确定不良的气缸.     

基于数字信号处理的直接转矩控制研究

直接转矩控制因控制简单、具有优良的动静态特性，在电机控制中应用越来越广泛。但它在低速区的局限也较多。随着数字信号处（Digital Signal Processing，缩写DSP）技术的发展，使得改善其低速控制特性成为可能。文中简介了直棼转矩控制技术的特点、控制原理及难点，探讨了一种应用DSP技术的直接转矩控制方法。     

地铁转向架构架动应力测试滤波频率的确定

文章结合上海地铁某转向架线路试验动应力测试结果,分析了典型信号的频率特性,对转向架动应力数据采用不同频率滤波,对滤波后的信号数据进行了比较,并结合采样定理提出了适用于地铁转向架荷载测试的滤波和采样频率。     

基于MSP430的低功耗水中低频信号采集系统

为了采集水中低频信号,提出基于MSP430F1611单片机和Flash存储器的水中低频信号数据采集与存储系统,实现了水中目标测量中的低噪声、低功耗、智能自动记录和大容量存储等关键技术,海上试验结果表明该系统精度高、性能可靠。     

Railway wheel-flat and rail surface defect modelling and analysis by time–frequency techniques

Damage to the surface of railway wheels and rails commonly occurs in most railways. If not detected, it can result in the rapid deterioration and possible failure of rolling stock and infrastructure components causing higher maintenance costs. This paper presents an investigation into the modelling and simulation of wheel-flat and rail surface defects. A simplified mathematical model was developed and a series of experiments were carried out on a roller rig. The time–frequency analysis is a useful tool for identifying the content of a signal in the frequency domain without losing information about its time domain characteristics. Because of this, it is widely used for dynamic system analysis and condition monitoring and has been used in this paper for the detection of wheel flats and rail surface defects. Three commonly used time–frequency analysis techniques: Short-Time Fourier Transform, Wigner–Ville transform and wavelet transform were investigated in this work.     

基于参数可设置Altera宏功能模块的MAX+plusⅡ设计

通过介绍参数可设置Alter宏功能(LPM)模块的功能及其在MAX+plusⅡ中的调用和定制方法,给出基于LPM的数控分频器、4X4乘法器和流水线加法器的设计方法.