基于发光反光高性能涂料的隧道照明安全与节能技术应用研究

为解决公路隧道照明节能压力和品质提升之间的矛盾问题,采用新型发光反光高性能涂料用于隧道涂装。通过模拟分析不同涂装方案对路面亮度、亮度均匀度及目标物亮度的增益作用得到适用于工程的应用方案。依托工程应用效果表明,采用发光反光高性能涂料涂装后,隧道行车安全性和舒适性程度更高,所用方案可降低隧道照明年运营能耗在20%以上。本技术对提升隧道照明安全和节能水平、推动隧道提质升级具有促进作用。     

石板尾隧道施工过程的动态仿真数值模拟研究

文章针对石板尾隧道浅埋偏压段台阶分部法施工的特点,采用有限元方法对隧道某一断面动态开挖过程进行数值模拟分析,以配合和指导隧道新奥法施工。通过将数值模拟结果与实测结果进行比较,验证了该数值模拟方法是切实可行的,可供隧道新奥法施工借鉴。     

大连长兴岛北港区波浪条件数值模拟研究

利用国际通用的MM5风场模式和SWAN浪场模式,通过推算影响工程海域的台风和寒潮大风天气过程,得到工程海域-30 m等深线处不同重现期设计波要素,然后采用MIKE 21 NSW和BW波浪数学模型,对工程规划方案设计波要素和港内波况进行了计算。结果表明:工程受N向和NNE向风浪影响相对较大,外海波浪传播至防波堤处无明显衰减;设计高水位重现期50 a时防波堤处最大H1%约7.3 m;防波堤对港内围堰掩护较好,建成后港内波浪条件明显改善。     

考虑沥青路面材料参数空间差异性的解析计算及影响分析

复杂服役环境下沥青路面的材料参数存在明显的空间差异性,具体表现为沿深度的模量梯度分布与非连续层间接触以及横观各向同性,实现其解析计算对现有的沥青路面力学响应分析及结构设计方法具有重要的参考价值。为此,从弹性力学基本方程出发,基于状态空间法,推导了具有指数模量梯度的横观各向同性弹性层状体系通解;在此基础上,基于波传递方法,将状态向量转换为波向量,并结合边界条件和层间条件,建立了考虑沥青路面材料参数差异性的多层路面结构解析解;然后借助MATLAB平台编制了数值计算程序,采用文献对比、BISAR程序以及有限元软件ABAQUS验证了该解析解的精度与效率;最后结合典型数值算例,阐述了该解析解在沥青Top-Down开裂和传统路面疲劳损伤分析中的应用。理论推导和数值计算结果表明：该解析解摆脱了弹性力学问题求解对应力函数的依赖性,并且借助波传播方法,避免了求解中正指数过大对求解精度的影响,并使得边界条件和不同层间接触关系的描述更加便捷;沥青路面材料参数的空间差异性不可忽视,沥青面层连续模量梯度会造成更大的路表拉应力和最大剪应力,进而加剧沥青路面的Top-Down开裂;而横观各向同性和层间接触状态间存在耦合效应,从而会加剧沥青路面的疲劳损伤。     

能耗吸收装置在城市轨道交通系统中的应用

介绍了城市轨道交通系统能耗吸收装置的原理和组成,分析了能耗吸收装置的能量吸收过程和系统控制方式,总结了能耗吸收装置运用过程中的故障种类、故障现象及相应的故障解决方法。     

Simplified buckling-and-contact-based expansion method for assessment of crashworthiness of double-hulled ship structure

Ship-to-ship collision events can have severe consequences such as loss of life and environmental degradation. For this reason, modern ship designs are required to incorporate a double-hulled structure to prevent inner-hull damage from such events. Using the experimental or numerical method to analyze the crashworthiness of double-hulled ship structures entails much effort, for which reason neither method is easy to adopt at the early design stage. In this paper, an existing simplified method called Ito's method is improved by a new buckling-and-contact-based expansion method. This method can be applied to double-hulled-structure or outer-hull-local-rupture failure mode. The perpendicular bow-to-side collision scenario is assumed for a conservative estimation of damage to a double-hulled structure. The method was verified in the present study by numerical ship collision simulations of several cases. The results for the buckling-and-contact-based expansion method and numerical simulation were similar for a blunt shape of striking body but different for a sharp shape.     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

Integrated planning of static and dynamic charging infrastructure for electric vehicles

This paper investigates the optimal deployment of static and dynamic charging infrastructure considering the interdependency between transportation and power networks. Static infrastructure means plug-in charging stations, while the dynamic counterpart refers to electrified roads or charging lanes enabled by charging-while-driving technology. A network equilibrium model is first developed to capture the interactions among battery electric vehicles’ (BEVs) route choices, charging plans, and the prices of electricity. A mixed-integer bi-level program is then formulated to determine the deployment plan of charging infrastructure to minimize the total social cost of the coupled networks. Numerical examples are provided to demonstrate travel and charging plans of BEV drivers and the competitiveness of static and dynamic charging infrastructure. The numerical results on three networks suggest that (1) for individual BEV drivers, the choice between using charging lanes and charging stations is more sensitive to parameters including value of travel time, service fee markup, and battery size, but less sensitive to the charging rates and travel demand; (2) deploying more charging lanes is favorable for transportation networks with sparser topology while more charging stations can be more preferable for those denser networks.     

电动汽车充电桩安全管理研究

随着国家对环境保护和能源节约的重视以及新能源政策的实施,电动汽车行业迎来了快速发展。充电基础设施的建设,是加快电动汽车推广的重要需要。电动汽车充电基础设施建设和运营业务发展的机会也极大,随之而来的安全管理工作要求也越来越高。本文依据充电桩建设和运营的特点,剖析其中面临的安全风险,并提出加强安全管理工作的措施,为充电桩企业安全管理运营提供参考和借鉴。     

基于云平台的城市轨道交通能源管理系统

阐述了基于云平台的城市轨道交通能源管理系统架构和建设方式.该系统利用云计算的高效和弹性来部署建设,采用线网-车站二层管理模式,降低了线网和线路服务器等的硬件部署成本和维护成本.通过将能源管理系统内部使用的业务应用转换为基于云平台的能源管理应用软件,能源管理系统可获取云平台提供的共享数据,并将经过业务处理后的数据存储到云...