基于机器视觉的人眼定位算法研究

基于机器视觉的疲劳检测难点是人眼的准确、自动化的定位.针对目前基于红眼效应的人眼定位算法需要手工介入的问题,提出了一种改进算法,采用眼部区域的几何特征和对比度相结合的算法实现了自动化人眼定位,形成了一种基于红眼效应的实时、自动化定位人眼的快速算法.然后构建了一套使用850 nm红外光源的人眼定位系统,实现了快速准确的定位人眼.     

曲线箱梁考虑剪滞效应的几何非线性分析

在考虑箱梁翼缘正应力的剪滞效应和结构竖向挠度的几何非线性影响前提下，依据势能变分原理，推导了薄壁曲线箱梁的非线性控制微分方程，并采用样条配点法和Newton-Raphon迭代法进行求解。算例计算表明，本文结果与有限条的解吻合较好，但本文的方法更经济、简单、实用，可推广于变截面、变曲率薄壁曲线箱梁的计算。     

车用柴油机可变截面涡轮增压器控制系统研究

提出了一种以步进电机为执行器、预测函数与增压压力闭不反馈相结合的VGT控制系统，以期对喷嘴环截面积进行有效的控制，综合提高发动机的稳态和动态性能。在自行构建的软硬件系统上进行了试验，结果表明该方案简单易行，实用性很强。     

The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

Simulation of dynamic interaction between train and railway turnout

Dynamic train–track interaction is more complex in railway turnouts (switches and crossings) than that in ordinary tangent or curved tracks. Multiple contacts between wheel and rail are common, and severe impact loads with broad frequency contents are induced, when nominal wheel–rail contact conditions are disturbed because of the continuous variation in rail profiles and the discontinuities in the crossing panel. The absence of transition curves at the entry and exit of the turnout, and the cant deficiency, leads to large wheel–rail contact forces and passenger discomfort when the train is switching into the turnout track. Two alternative multibody system (MBS) models of dynamic interaction between train and a standard turnout design are developed. The first model is derived using a commercial MBS software. The second model is based on a multibody dynamics formulation, which may account for the structural flexibility of train and track components (based on finite element models and coordinate reduction methods). The variation in rail profile is accounted for by sampling the cross-section of each rail at several positions along the turnout. Contact between the back of the wheel flange and the check rail, when the wheelset is steered through the crossing, is considered. Good agreement in results from the two models is observed when the track model is taken as rigid.     

Mathematical modelling of train–turnout interaction

The paper proposes a mathematical model of train–turnout interaction in the mid-frequency range (0–500 Hz). The model accounts for the effects of rail profile variation along the track and of local variation of track flexibility. The proposed approach is able to represent the condition of one wheel being simultaneously in contact with more than one rail, allowing the accurate prediction of the effect of wheels being transferred from one rail to another when passing over the switch toe and the crossing nose. Comprehensive results of train–turnout interaction during the negotiation of the main and the branch lines are presented, including the effect of wear of wheel/rail profiles and presence of track misalignment. In the final part of the paper, comparisons are performed between the results of numerical simulations and line measurements performed on two different turnouts for urban railway lines, showing a good agreement between experimental and numerical results.     

滑动标准差在轨道几何区段状态评价中的应用

轨道质量指数TQI为左高低、右高低、左轨向、右轨向、轨距、水平、三角坑各单项标准差的和。各单项项目的标准差直接体现了此项几何不平顺的输入能量,表现为此项几何不平顺的离散程度,当它的值越大时,表明轨道状态较差,对车辆的激励能量大。针对目前分段标准差计算方式不能完全反映轨道质量状态最差的区段、评判结果存在离散性等缺点,提出利用滑动标准差计算方式对轨道区段状态进行评价的方法。通过研究确定合适的计算长度200 m和移动步长20 m,并利用京沪线9~10月份检测数据进行试用,结果表明:滑动标准差不仅能够找到轨道质量状态最差的区段,还能找出更多超出管理值标准的区段,且在识别不良区段的起止位置(长度)和评判结果一致性方面,也明显好于目前的分段标准差计算方式。     

低复杂度多进制LDPC码译码算法研究

为了降低多进制准循环低密度奇偶校验（QC-LDPC）码译码的复杂度,给出了一种低复杂度多进制LDPC码的译码算法。这种算法在FFT-QSPA算法的基础上结合了对数域法和查表法,避免了硬件运算速度较慢的乘除法运算,更易于硬件实现;其准循环结构校验矩阵的构造采用基于有限域和有限几何的方法,用反馈移位寄存器即可实现多进制QC-LDPC的线性编码。文章针对低复杂度的多进制LDPC码编译系统给出了一种联合构造-编码-译码的方案。仿真表明,与RS码相比,多进制QC-LDPC码不仅获得了明显的编码增益,同时复杂度大大降低。在未来的通信存储系统中,结构化多进制LDPC码可以替代RS码对抗混合噪声和干扰,具有很大的发展潜力。     

8170型柴油机应用可变几何排气管增压系统的计算研究

为了实现8缸柴油机高低负荷兼顾,提出新的可变几何排气管增压系统,通过安装在排气管上的可控阀门来实现增压方式的转换。对可变几何排气管增压系统进行稳态和瞬态计算研究。稳态计算结果表明,与原机MPC增压系统相比,在25%、50%、75%和100%负荷时,可变几何排气管增压系统的平均扫气系数均大于MPC系统的平均扫气系数,油耗均小于MPC增压系统的油耗。瞬态计算结果表明,可控阀门关闭以后,压气机后进气压力增加的程度较大。     

螺旋桨自动化几何建模和网格划分技术

为了快速实现船用螺旋桨有限元建模,为极限强度分析和疲劳校核做准备,针对船用螺旋桨的结构特点,利用MSC.Patran前后处理器的二次开发技术,开发了1套螺旋桨自动化建模软件,定义了螺旋桨建模的型值表标准格式,实现了螺旋桨几何建模和网格划分的自动化.对某冰区加强螺旋桨进行了建模和计算,结果表明,系统建立的螺旋桨模型能保持良好的光顺效果和网格质量,满足计算要求.本文提出了基于MSC.Patran的螺旋桨自动建模方法,避免了传统手工建模中复杂和重复的工作,大幅提高了螺旋桨设计分析效率,具有重要的参考价值.