基于Matlab油船意外泄油性能的程序设计

基于概率方法的意外泄油性能参数计算是2010年1月1日及以后新造船破舱稳性需要评估的性能之一,满足一定的衡准要求方可。根据油船的分舱分别进行船底破损概率和船侧破损概率的插值,然后按照一定的公式求出船底破损后与船侧破损后的泄油量的加权之和,即意外泄油性能参数。由于手工计算费时费力,文章基于Matlab平台,开发了意外泄油性能参数的自动计算程序模块。计算结果与文献结果相比较,证明了本程序的计算精度,具有较好的工程实用价值。     

基于有限元的尼龙板热膨胀性能分析

尼龙材料由于其良好的机械性能及热性能而被广泛应用于各种生产领域,了解掌握尼龙板材在不同温度环境下的热膨胀变形对于设备的维护和保养十分重要。本文从材料的热膨胀理论出发,以有限元的理论为基础,详细讨论尼龙板材在不同温度下发生的热膨胀变形,通过有限元仿真分析尼龙板材在不同温度下的热膨胀性能,得出尼龙板在一定温度范围内的热膨胀变化规律。     

基于改进型消灭曲线法的横摇阻尼估算

自由衰减试验仍是目前最为有效且常用的估算横摇阻尼系数的方法.横摇阻尼系数的估算精度对于船舶横摇运动的预报起着至关重要的作用.通常采用所谓的消灭曲线法来分析自由横摇衰减数据.该方法的一个不足之处在于其推导是基于忽略了非线性恢复力项的自由横摇运动方程.另一方面,考虑更多非线性成分的能量法能够纳入该因素影响但在实施过程中较为复杂.文中提出了一种改进型的消灭曲线法,能够纳入船体非线性恢复力项的影响.所提出的方法形式简单且相比能量法更易于实施.数值试验证明了改进型消灭曲线法的正确性,并展现了其相对传统消灭曲线法所具有的优势.     

型腔结构对尾轴承力学性能影响的有限元分析

型腔尺寸的大小和腔数对水润滑橡胶尾轴承的力学性能有重要影响，并且直接影响轴承的承载能力和运转精度。本文基于有限元法，研究了不同型腔数目、型腔全角和型腔长度对尾轴承的力学性能影响。结果表明：在5种不同腔数尾轴承的研究对比中发现，4腔尾轴承的力学性能最优。研究型腔全角和长度因素影响时，发现全角55°长度500 mm的型腔结构性能更好。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

Hydroelastic analysis of oblique irregular waves with a pontoon-type VLFS edged with dual inclined perforated plates

The fluid-structure interaction of oblique irregular waves with a pontoon-type very large floating structure (VLFS) edged with dual horizontal/inclined perforated plates has been investigated in the context of the direct time domain modal expansion theory. For the hydroelastic analysis, the boundary element method (BEM) based on time domain Kelvin sources is implemented to establish water wave model including the viscous effect of the perforated plates through the Darcy’s law, and the finite element method (FEM) is adopted for solving the deflections of the VLFS modeled as an equivalent Mindlin thick plate. In order to enhance the computing efficiency, the interpolation-tabulation scheme is applied to assess rapidly and accurately the free-surface Green function and its partial derivatives in finite water depth, and the boundary integral equation of a half or quarter VLFS model is further established taking advantage of symmetry of flow field and structure. Also, the numerical solutions are validated against a series of experimental tests. In the comparison, the empirical relationship between the actual porosity and porous parameter is successfully applied. Numerical solutions and model tests are executed to determine the hydroelastic response characteristics of VLFS with an attached anti-motion device. This study examines the effects of porosity, submerged depth, inclined angle and gap distance of such dual perforated anti-motion plates on the hydroelastic response to provide information regarding the optimal design. The effects of oblique wave angle on the performance of anti-motion and hydroelastic behavior of VLFS are also emphatically examined.     

铁路预应力路堤加固技术数值研究

研究目的:铁路预应力路堤在国内外尚属一种新型路基加固法,其受力变形特性暂未得到系统化研究,相关加固设计理论仍处于探索性阶段。因此,有必要通过数值手段了解预应力路堤的工作状态,以掌握其加固性能。鉴于此,借助ABAQUS软件平台构建预应力路堤仿真系统,分析差异化预应力加固参数对路堤变形和承载能力的影响以及预应力加固构件的受力特征。研究结论:(1)路堤本体段坡面较优加固位置为距本体顶面以下0.3倍本体高度处;(2)坡率1∶1的预应力路堤在第1、2排侧压板分别施加50 k Pa、100 k Pa预压荷载时,其变形与承载力均可达传统路堤(坡率1∶1.5)水平,并可通过提升加固标准进一步强化路堤承载性能;(3)当对第1、2、3排侧压板分别施加50 k Pa、100 k Pa、100 k Pa预压荷载时,路堤内部附加围压S11>13.5 k Pa区域大致呈"x"形分布并形成横贯路堤的"预压加固区";(4)侧压板锚固区受力集中且复杂,应注意保障锚固区板体强度;(5)力筋在路堤加载前后的应力变化量与坡面侧向变形特征相关;(6)本研究成果可为铁路预应力路堤的加固设计提供技术指导。     

基于隧道检测钢筋分布不均状况下判定衬砌结构安全性应用研究

近年来隧道内出现的越来越多的质量安全事故,引起各方高度重视,相应的最适宜隧道主体工程衬砌质量控制的地质雷达无损检测方法被广泛应用。通过雷达无损检测可揭露出衬砌内欠厚、脱空、钢筋分布不均等大量各类型缺陷,针对欠厚脱空等缺陷制定的注浆或开窗等治理措施是目前工程中常见的整改闭合工序,但钢筋分布不均对结构安全影响如何判定,怎么界定处理尚无成熟方案与规定。本文针对隧道项目中实际检测出的钢筋分布不均缺陷,在不宜大范围扰动结构及围岩进行整治的情况下,以及在避免其他问题共存等不利因素的前提下,应用有限元数值模拟计算分析强度安全系数,并结合现场外观等综合因素对衬砌结构安全性进行分析判定研究。     

Validating and improving public transport origin–destination estimation algorithm using smart card fare data

Smart card data are increasingly used for transit network planning, passengers’ behaviour analysis and network demand forecasting. Public transport origin–destination (O–D) estimation is a significant product of processing smart card data. In recent years, various O–D estimation methods using the trip-chaining approach have attracted much attention from both researchers and practitioners. However, the validity of these estimation methods has not been extensively investigated. This is mainly because these datasets usually lack data about passengers’ alighting, as passengers are often required to tap their smart cards only when boarding a public transport service. Thus, this paper has two main objectives. First, the paper reports on the implementation and validation of the existing O–D estimation method using the unique smart card dataset of the South-East Queensland public transport network which includes data on both boarding stops and alighting stops. Second, the paper improves the O–D estimation algorithm and empirically examines these improvements, relying on this unique dataset. The evaluation of the last destination assumption of the trip-chaining method shows a significant negative impact on the matching results of the differences between actual boarding/alighting times and the public transport schedules. The proposed changes to the algorithm improve the average distance between the actual and estimated alighting stops, as this distance is reduced from 806 m using the original algorithm to 530 m after applying the suggested improvements.