基于数值模拟的钛合金锯齿状切屑研究

切削加工中切屑成形是一种典型的大变形问题,它涉及到材料非线性、几何非线性以及边界非线性等问题。本文利用DEFORM-2D对钛合金(Ti6Al4V)进行了锯齿状切屑形成过程的有限元模拟,分析了切削过程中的应力场、应变场及温度场,探讨了锯齿状切屑的形成机理,获得了切削参数对锯齿状切屑形态的影响规律,为优化切削参数、提高刀具寿命提供了参考。     

动态有限元法在船体板架振动计算中的应用

该文通过直接求解轴向受载的均匀Timoshenko梁单元扭转振动和弯曲振动的运动微分议程,导出了考虑轴向力,剪切变形和转动惯量的平面板架的动态刚度短阵的解析表达式,并用改进的二分法求解频率特征议程,经对处于复杂弯曲状态的船体板架振动的数值计算,验证了本方法的精确性和有效性。     

船舶推进轴系设计的模糊综合评估

采用模糊综合评估方法对推进轴系设计进行综合评估。重点介绍推进轴系综合评估的结构模型的建立,应用层次分析法（AHP）计算各评估指标的权重,并简单介绍主要指标因素隶属度函数的研究。对某船两套推进轴系设计方案进行了具体的计算评估。结果表明,本方法可较好地评估船舶推进轴系设计。     

The effect of crowding on public transit user travel behavior in a large-scale public transportation system through modeling daily variations

In this paper, the crowding effect in a transit vehicle is modeled in a time-expanded network that considers the daily variation in passenger flows. The study models the daily variation of in-vehicle crowding in a real large-scale transit system. A transit assignment for this real network is modeled and implemented by constructing a crowding cost function that follows the valuation of crowding and by using the reliable shortest path finding method. The direct application of the crowding model to a real network for the Utah Transit Authority indicates that crowd modeling with multi-user classes could influence public transportation system planning and affect the revenues of transit agencies. Moreover, the addition of the disutility factor, crowding, does not always appear to cause an increase in disutility for transit users.     

液化天然气(LNG)汽车日常检查方法及维护技术综述

天然气是一种优质的替代燃料,具有污染小、安全系数高、运行费用低等优点。天然气已经成为城市公共交通领域应用最为成功和广泛的车辆替代燃料技术,为推动交通运输行业的节能减排做出了显著的贡献。液化天然气汽车,作为天然气汽车的一种类型,与传统汽柴油车相比,液化天然气汽车安装了包括液化天然气气瓶、气管路及各种控制阀门和仪表在内的专用装置,在对液化天然气汽车进行日常检查时需要针对液化天然气汽车的专用装置进行重点检查。本文则针对液化天然气汽车的特点,对液化天然气汽车的正确使用方法、日常检查方法及维护技术要求、以及相关注意事项三个方面进行了解读,为指导液化天然气汽车进行日常检查与定期维护提供了技术参考。     

基于价值函数的城市绿色交通规划评价

为了评价城市绿色交通,建立了城市绿色交通评价体系,包括环保性指标等3个评价项目和道路绿化率等8个评价指标,文章通过案例分析发现,价值函数法适用于城市绿色交通评价。采用专家打分法确定指标权重系数,并对指标进行无量纲化、同趋向化等处理,采用价值函数法计算评价体系得分。     

Preliminary investigation of PM1, PM2.5, PM10 and its metal elemental composition in tunnels at a subway station in Shanghai,China

In this study, real-time monitoring campaigns were conducted in two tunnels (Line A and Line B) at a subway station in Shanghai, including temperature, relative humidity, PM₁, PM_2.5 and PM₁₀, in order to understand the climate and PM characteristics in the transportation microenvironment. In addition, collected floor dust particles in the tunnel were analyzed by ICP for their metal elemental composition. Strong correlations occurred between all PM levels and meteorological parameters in the tunnel of Line A (with platform screen doors), in comparison with the weak correlations between such parameters in the tunnel of Line B (without platform screen doors). PM_2.5 and PM₁₀ between peak hours and off-peak hours for both lines presented significant differences (p < 0.05), respectively. Nevertheless, PM₁ showed a different pattern, with p > 0.05 for Line A and p < 0.05 for Line B, respectively. In addition, statistical results concluded that PM had an evident weekly variation for both lines. Friday was the highest day of all particulate matters in monitoring periods for both lines. Ratios of PM₁/PM₁₀ and PM_2.5/PM₁₀ were high when trains were out of service and low when trains were in service. Relative abundance of metal elements detected from floor dust particles proved that floor dust particles in tunnels might be a major source of airborne PM in the subway microenvironments, with Fe as the most abundant metal element, followed by Ca, Al, Mg, Mn, Zn, Cu, Cr, Ni, Pb and Hg.     

基于数理统计方法的铁路隧道衬砌质量缺陷分析

目前,利用地质雷达法检测隧道衬砌质量时,通常仅对隧道衬砌缺陷进行描述,较少深入分析这些缺陷的内在分布规律.采用数理统计的方法,对某在建铁路工程14座隧道共285个衬砌质量缺陷样本的分布规律进行分析.研究表明,(1)在不同测线部位,其缺陷率、不同缺陷类型占该测线缺陷比例、缺陷径向尺寸的最大值、平均值及样本标准差均不同;(...     

行人头部与车辆碰撞中旋转速度对颅脑组织响应影响

为了探究旋转速度在行人头部与车辆碰撞中对颅脑组织响应影响,对46例真实交通事故进行了运动学重建获得行人头部与车辆碰撞线性、旋转速度分布特征,并依此建立了头部与风挡、发动机罩碰撞有限元仿真模型,分析了头部旋转速度在不同线性速度和碰撞位置下对颅脑应力应变响应影响特征.结果表明:在行人头部与风挡碰撞中,当线性速度小于40 k...     

多传感器融合车载电池舱灭火方法研究

电动汽车属于汽车行业的支柱产业,越来越受到社会的重视,但随之产生的汽车安全问题也逐渐增多。电池舱属于复杂环境,易出现着火事件,本文开展多传感器融合车载电池舱灭火方法研究,运用温度、烟雾浓度传感器实现对火灾的实时监测。设计贝叶斯网络模型,并考虑到了传感器失效及误报,实验结果表明本系统具有良好的响应速度及稳定性,为相关领域研究提供了一种解决方法。