考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

山区高速公路弃渣体物理力学特性试验研究

公路弃土场是一种特殊的人工堆积体,对其进行稳定性分析与评价需要掌握弃渣体的物理力学指标。文章以厦蓉高速公路水都段典型弃土场弃渣体为研究对象,介绍采用现场试验和室内试验方法,对弃渣体的最大干密度和抗剪强度等参数进行研究。通过研究得到：不同颗粒成分弃渣体的最大干密度不同,但在通常推填方式下,弃渣体的强度指标基本不受压实度控制。     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

The Storage Space Allocation Problem at a Container Terminal

Due to the asymmetry between the time required to retrieve a container to vessel and the time required to register a container at the gate, the storage space allocation problem solves the best allocation policy of these containers that minimizes the potential number of gantry movements during the assigning process and the future retrieval process. A decision rule-based heuristic is proposed, and three properties are discovered in this research. Comprehensive numerical experiments show that the proposed heuristic can solve the real-sized instances within a second, making it possible to account for uncertainty because the re-optimization effort is negligible. Moreover, when applying the proposed heuristic to a container yard at the Port of Kaohsiung in Taiwan and considering the extreme cases, the heuristic performs even better when the number of containers increases and still requires less than 1 s to solve these extreme cases. Finally, the proposed heuristic can be applied to different layouts of storage space and various material handling machines.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

振冲法加固砂土地基工艺选择及施工参数控制

根据砂土的黏粒含量,振冲法可采用不加填料的振冲密实法或有填料的振冲置换法,选择合适的振冲施工工艺和确定合理的工艺参数,与地基加固效果和地基处理的工程投资密切相关。在振冲器的振动荷载作用下,由于饱和砂土的液化产生振密作用,根据孔隙水压力的增长模型,推导了饱和砂土的临界液化时间,并分析留振时间的影响因素。结合两个工程实例,探讨了振冲密实法和振冲置换法两种工艺的适应性及加固效果。根据砂土的类型和黏粒含量,将砂土地基分为3类,不同的砂土地基采用合适的振冲工艺,并得出施工参数的合理区间。     

横向型企业集团利润最大化的订单分配模型

当由集团公司统一承接市场订单时，订单在各成员企业问的分配是关键问题．以集团利润最大化为目标，运用优化理论建立了单目标0-1规划的订单分配模型．模型中考虑了股权、资金成本、固定运营成本等因素．对模型求解可以确定集团对市场订单的分配，并由此编制集团各成员企业的生产及运输计划．用算例说明了模型的求解方法．     

Numerical modeling of ground response during diaphragm wall construction

Construction of diaphragm wall panels may cause considerable stress changes in heavily overconsolidated soil deposits and can induce substantial ground movement. The 3D Lagrangian method was adopted to model the mechanical response of ground, including horizontal normal stress and shear stress, lateral ground displacement and vertical ground surface settlement, during the slurry trenching and concreting of diaphragm wall panels. Numerical results show that slurry trenching leads to horizontal stress relief of ground, reducing the horizontal stress of the ground from initial K0 pressure to hydrostatic betonite pressure. Wet concrete pressure lies between the hydrostatic bentonite pressure and the initial K0 pressure, so it can compensate partially the horizontal stress loss of the ground adjacent to the trench and thus reduce the lateral movement of the trench face as well as the vertical settlement of the ground surface.