散货船舱口盖剩余强度

通过对散货船舱口盖极限强度的理论分析，采用了正交各向异性板及刚塑性模型进行了理论上的推导，并对7万t散货船的1号舱的舱口盖(两块对称滚动式)，进行了ILL66及IACS URS21(1998年版与上述ILL66的88议定书中载荷的量级相当)的外载荷的比较及线性和非线性的有限元分析。本文所采用的有限元的线性及弹塑性计算对实际的舱口盖进行评估的结果证明，IACS URS21(ILL66的88议定书)的标准比ILL66的标准有所提高。采用非线性有限元法是在初始设计阶段使用的可行方法。这些结果可供规范研制工作参考。     

Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

一种多功能非线性控制器的电路设计

给出一种多功能曲线模拟电路,它可在不改变电路结构的情况下实现多种类型的非线性控制,克服了目前一些曲线模拟器应用上的单一性问题,为一些不使用微机技术完成非线性控制的场合提供了一种简单实用的方法。     

O′ZBEKISTON型机车单元制动器的技术难点及解决方案

文章分析了装用抱轮缘铸铁闸瓦的O′ZBEKISTON型机车用单元制动器的研制技术难点,通过理论分析提出了解决方案。型式试验及线路运行实践证明该单元制动器能够满足O′ZBEKISTON型机车的运用要求。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。     

船舶除锈机器人驱动系统设计

介绍了应用在船舶除锈的磁吸附爬壁机器人本体驱动系统的设计,着重阐述了系统的驱动原理和驱动电路。系统以89c51单片机为核心,通过键盘以及通信接口可以方便的控制步进电机带动机器人本体运动,充分发挥了单片机的优势。实验表明,系统电路设计合理,简单实用。     

水下航行器热动力推进系统的非线性变结构控制仿真研究

在对水下航行器热动力推进系统非线性模型进行合理简化的基础上，首次采用趋近律法设计了水下航行器变速变深运动的动力推进系统变结构控制器，并进行了数字仿真，仿真结果表明，所设计的控制器控制精度高，抑制抖振效果显著，且该方法物理概念清晰，算法简单，易于实现，对水下航行器热动力推进系统控制的工况应用有实用价值。     

深水导管架滑移下水轨迹的计算与分析

导管架由驳船上滑移下水，首先在倾斜的驳船上由外力（液压缸或绞车）推动克服滑靴与滑道间的静摩擦力，其后在倾斜的滑道上靠自身重力的作用滑移，最后通过下水驳船的摇臂滑入水中。在此过程中，应考虑到导管架的运动轨迹是否安全稳定（如导管架和泥面的安全间隙）、导管架是否以安全的方式脱离摇臂、导管架最终的漂浮位置是否稳定以及驳船的倾角等方面。采用时域分析法对导管架重心的轨迹进行计算和分析。