强夯施工加固地基的原理及工艺——以张家口市城市快速路路基强夯施工为例

强夯法处理地基具有设备简单、施工便捷、适用范围广、节省材料、工期短等优点，在今后的工程施工中必将得到进一步的应用。     

用遮帘桩型式改造三峡库区大件设备运输码头

三峡库区大件运输具有临时性、短期性的特点,大件码头的建设大都采用老码头加固改造的方式.通过对三峡库区现有码头结构特点和库区水文条件的分析,提出用遮帘桩型式的改造方案,并对改造方案的结构稳定性进行了计算分析.遮帘桩型式改造三峡库区大件运输码头,结构稳定性能够满足要求,同时结构对航道的通航能力不产生影响,是一种可以应用到三峡库区及其他山区河流水库大件运输码头改造的方案.     

A closed-loop dynamic simulation-based design method for articulated heavy vehicles with active trailer steering systems

This paper presents a closed-loop dynamic simulation-based design method for articulated heavy vehicles (AHVs) with active trailer steering (ATS) systems. AHVs have poor manoeuvrability at low speeds and exhibit low lateral stability at high speeds. From the design point of view, there exists a trade-off relationship between AHVs’ manoeuvrability and stability. For example, fewer articulation points and longer wheelbases will improve high-speed lateral stability, but they will degrade low-speed manoeuvrability. To tackle this conflicting design problem, a systematic method is proposed for the design of AHVs with ATS systems. In order to evaluate vehicle performance measures under a well-defined testing manoeuvre, a driver model is introduced and it ‘drivers’ the vehicle model to follow a prescribed route at a given speed. Considering the interactions between the mechanical trailer and the ATS system, the proposed design method simultaneously optimises the active design variables of the controllers and passive design variables of the trailer in a single design loop (SDL). Through the design optimisation of an ATS system for an AHV with a truck and a drawbar trailer combination, this SDL method is compared against a published two design loop method. The benchmark investigation shows that the former can determine better trade-off design solutions than those derived by the latter. This SDL method provides an effective approach to automatically implement the design synthesis of AHVs with ATS systems.     

基于阻性分离技术的氧化锌避雷器试验台

电力机车大气过电压保护主要是在网侧设置金属氧化物避雷器，检修规程要求应定期对避雷器进行预防性试验，氧化锌避雷器的等效电路为非线性电阻与非线性电容的并联，如何从物理结构上不可分割的非线性阻容并联的电路中准确分离出阻性电流，是该试验台研制的重点。     

重载铁路轮轨磨损原因探讨

根据轮轨接触理论，分析了不同轮轨接触几何匹配关系下的轮轨接触应力情况，指出轮轨接触应力、轮轨接触几何关系、轴重是影响重载铁路轮轨磨损的主要因素，从重载运输装备方面提出了减少轮轨磨损的几点建议。     

铁路重载货车车钩裂纹故障探讨

对16型、17型车钩钩体、钩舌在开行2万t重载列车后出现的裂纹增多现象进行了调研，从设计、制造工艺、运用工况变化等方面对故障原因进行了分析，从产品结构、制造工艺等方面提出了改进措施。实际运用证明改进措施成功可行。     

重载铁路牵引供电方案与接触网载流能力的分析

针对重载铁路以及交流传动机车的特点,对新建重载铁路牵引供电方案与接触网载流能力的关系进行了细致的分析,逐步深入的介绍了重载铁路牵引供电方案设计的几个关键步骤,以及详细的计算方法,并提出了设计中应注意的问题。     

Coupler jackknifing and derailments of locomotives on tangent track

A number of derailments occurred in recent years due to coupler jackknifing, some of them were reported on tangent tracks where conventionally thought to be the safer sections. This article studied coupler jackknifing behaviour and its implications for locomotive safety on tangent tracks from the experience of China heavy haul. Three types of coupler systems were modelled and simulated regarding coupler jackknifing behaviour. Two typical locomotive derailments occurred on tangent tracks were analysed. From the derailment experience, coupler angle self-lock behaviour was introduced and simulated. An approach to determine coupler angles in the jackknifed position was derived and validated with a self-coded program and SIMPACK. Methods to prevent coupler jackknifing were also evaluated with regard to locomotive stability.     

苏丹某油田预脱水站处理工艺分析

苏丹某油田是稠油为主力区块的油田，油品密度大、含蜡高、倾点高。站内脱水工艺为两级分离，两级换热的三相分离器热化学分离。投产后由于产量增加，原油含水率上升，运行参数发生了变化。文中通过对站内工艺流程和原油物性的分析，提出了调整流程的建议。     

大型全回转起重船抗横倾系统设计

大型全回转起重船起重机吊重货旋转时将产生很大的横倾力矩,需配置抗横倾水舱,通过反向调拨压载水,使船舶横倾控制在安全范围之内。文章对合理布置抗横倾水舱、确定抗横倾水舱的舱容、抗横倾泵流量的选取和抗横倾系统的模式进行论述,对于大型全回转和半回转起重船的分析设计提供较好的参考和借鉴。