挂篮底模纵梁受力简化计算方法及承重分配系数

以一桥梁施工工程实例为依托,采用有限元软件ANSYS对桥梁悬臂施工中使用的菱形挂篮进行仿真分析.提出3种简化模式计算底模纵梁的承重分配,对比发现将底模纵梁承受的外荷载简化为集中荷载,并分配至挂篮下前后横梁的方法是最优简化计算方法.在此基础上对挂篮底模纵梁承重分配系数进行优化,从而简化了繁琐的挂篮底模纵梁受力分析计算,保证了挂篮结构设计和施工的安全.     

大神高速公路穿越矿区选线思路

结合山西省大营至神池高速公路设计经验,对矿区公路的特点进行了总结归纳,并以实际工程为例,提出了选线设计的总体原则和主要思路,供设计人员参考。     

公路建设项目征地拆迁补偿费用确定与控制方法研究

文中以广东省公路建设项目征地拆迁费用的确定为例,以现行实施的征地拆迁补偿相关规定为基础,探讨征地数量和标准的计量、计算方法,建立征地拆迁标准动态数据库,以期对征地拆迁费用的确定和控制提供思路和实际操作指导。     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

公路工程施工管理质量研究

公路工程施工管理直接关系到工程项目的质量,在施工中加强管理控制是十分必要的,结合公路工程施工管理的特点,对影响公路工程管理质量的因素进行分析,并提出具体解决对策,对类似工程施工有一定的指导意义.     

绿色公路技术LCA评价体系及效益分析

针对各类绿色公路技术难以横向比较的问题,文章从技术可行性、经济效益、节能减排效益等方面,提出建立绿色公路技术LCA评价体系,并以G312苏州西段工程为例进行综合效益分析,其综合效益最为显著,具备规模化、资源化、投资适宜的绿色公路技术;技术瓶颈问题的突破和创新,是推进绿色公路发展的根本动力;将绿色理念融入公路建设的全生命周期的前提,是因地制宜的前期规划布局研究,也是合理选择适宜绿色公路技术的基础。     

基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

智能网联车环境下高速匝道汇入车流轨迹优化模型

为了解决传统匝道控制车流汇入时车辆需要减速至停止，从而造成延误时间过长的问题，提出了一种智能网联车环境下的高速匝道汇入车辆轨迹优化的两阶段优化模型，其中，第1 阶段优化车辆进入匝道口的时序；第2 阶段基于第1 阶段的最优时序，优化车辆轨迹. 根据所构建的模型设计了一种启发式算法优化车辆通过匝道冲突区域的时序，然后结合 GPOPS工具优化车辆的轨迹.为了验证所提出方法的有效性，将所提出的方法应用到20 min 随机到达的车流，进行仿真实验.实验结果表明，与先进先出的方法相比，本文所提出的方法能够使总延误减少59.7%，总油耗减少10.5%，说明该方法能够实现车辆以较高的速度通过匝道冲突区域，有效地减少了车辆汇入延误，同时也节约了油耗.     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

Generating lane-based intersection maps from crowdsourcing big trace data

Lane-based road information plays a critical role in transportation systems, a lane-based intersection map is the most important component in a detailed road map of the transportation infrastructure. Researchers have developed various algorithms to detect the spatial layout of intersections based on sensor data such as high-definition images/videos, laser point cloud data, and GPS traces, which can recognize intersections and road segments; however, most approaches do not automatically generate Lane-based Intersection Maps (LIMs). The objective of our study is to generate LIMs automatically from crowdsourced big trace data using a multi-hierarchy feature extraction strategy. The LIM automatic generation method proposed in this paper consists of the initial recognition of road intersections, intersection layout detection, and lane-based intersection map-generation. The initial recognition process identifies intersection and non-intersection areas using spatial clustering algorithms based on the similarity of angle and distance. The intersection layout is composed of exit and entry points, obtained by combining trajectory integration algorithms and turn rules at road intersections. The LIM generation step is finally derived from the intersection layout detection results and lane-based road information, based on geometric matching algorithms. The effectiveness of our proposed LIM generation method is demonstrated using crowdsourced vehicle traces. Additional comparisons and analysis are also conducted to confirm recognition results. Experiments show that the proposed method saves time and facilitates LIM refinement from crowdsourced traces more efficiently than methods based on other types of sensor data.