车辆牌照信息调查法在公路OD调查中的应用

分析停车问询调查法和车辆牌照信息调查法在公路OD调查中的优缺点,结合浙江省两次全省公路OD调查的实际经验,指出公路OD调查自动化和常态化的发展方向.     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

Urban single-lane roundabouts: A new analytical approach using multi-criteria and simultaneous multi-objective optimization of geometry design,efficiency and safety

Building safe and effective roundabouts requires optimizing traffic (operational) efficiency (TE) and traffic safety (TS) while taking into account geometric factors, traffic characteristics and local constraints. Most existing simulation-based optimization models do not simultaneously optimize all these factors. To capture the relationship among geometry, efficiency and safety, we put forward a model formulation in this paper. We present a new multi-criteria and simultaneous multi-objective optimization (MOO) model approach to optimize geometry, TE and TS of urban unsignalized single-lane roundabouts. To the best of our knowledge, this is the first model that uses the multi-criteria decision-making method known as analytic hierarchy process to evaluate and rank traffic parameters and geometric elements of urban single-lane roundabouts. The model was built based on comprehensive review of the research literature and existing roundabout simulation software, a field survey of 61 civil and traffic expert engineers in Croatia, and field studies of roundabouts in the Croatian capital city of Zagreb. We started from the basis of Kimber’s capacity model, HCM2010 serviceability model, and Maycock and Hall's accident prediction model, which we extended by adding sensitivity analysis and powerful MOO procedures of the bounded objective function method and interactive optimization. Preliminary validation of the model was achieved by identifying the optimal and most robust of three geometric alternatives (V.1-V.3) for an unsignalized single-lane roundabout in Zagreb, Croatia. The geometric parameters in variant V.1 had significantly higher values than in the existing design V.0, while approaches 1 and 3 in variant V.2 were enlarged as much as possible within allowed spatial limits and Croatian guidelines, reflecting their higher traffic demand. Sensitivity analysis indicated that variant V.2 showed the overall highest TE and TS across the entire range of traffic flow demand and pedestrian crossing flow demand at approaches. At the same time, the number of predicted traffic accidents was similar for all three variants, although it was lowest overall for V.2. The similarity in predicted accident frequency for the three variants suggests that V.2 provides the greatest safety within the predefined constraints and parameter ranges explored in our study. These preliminary results suggest that the proposed model can optimize geometry, TE and TS of urban single-lane roundabouts.     

A planning tool for evaluating vehicles miles travelled and traffic safety forecasts of growth management scenarios: A case study of Baton Rouge and New Orleans

This study describes an adaptable planning tool that examines potential change in vehicle miles travelled (VMT) growth and corresponding traffic safety outcomes in two urbanized areas, Baton Rouge and New Orleans, based on built environment, economic and demographic variables. This model is employed to demonstrate one aspect of the potential benefits of growth management policy implementation aimed at curbing VMT growth, and to establish targets with which to measure the effectiveness of those policies through a forecasting approach. The primary objective of this research is to demonstrate the need to break with current trends in order to achieve future goals, and to identify specific policy targets for fuel prices, population density, and transit service within the two study regions. Models indicate based on medium growth scenarios, Baton Rouge will experience a 9 percent increase in VMTs and New Orleans will experience 10 percent growth. This translates to corresponding increases in crashes, injuries and fatalities. The paper provides forecasts for planners and engineers to consider an alternative future, based on desired goals to reduce VMTs and therefore improve safety outcomes. A constrained-forecast model shows a cap on VMTs and crash rates is achievable through policy that increases fuel prices, population density and annual transit passenger miles per capita at reasonable levels through a growth management approach.     

高速公路山岭隧道设计阶段安全风险评估

通过定性分析与定量分析相结合的方法,利用专家分析法和层次分析法研究各风险控制因素与权值.从技术角度考虑设计方案中各种不确定因素对后续施工及运营造成的不利影响,并得出相关结论,对于指导实际工作有一定的意义.     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

公路工程的水土保持生态补偿

就公路工程中所遇到的环境问题,结合设计施工中的解决办法,阐述公路工程的水土保持生态补偿,从而减小因道路施工给沿线自然地形、地貌造成的各种破坏,保护和改善当地环境,提高公路的使用效果,更好地发挥公路的各项功能。     

基于BIM的公路隧道运维管理系统设计与开发

近年来,我国公路隧道建设里程快速增长,但在隧道运维管理中存在技术落后、管理人员配置不足等问题。针对管理中存在的问题,本文提出将BIM(building information modeling,建筑信息模型)引入公路隧道的运维管理,通过制定具体实施规划及设计系统架构,实现可视化的公路隧道运维管理。以浙江省41省道岭下隧道工程为依托,建立基于BIM的公路隧道运维管理平台,为公路隧道运维管理提供一种直观、便捷的管理方式,提高公路隧道的信息化管理水平。     

基于SHEL和三角模糊数理论的地铁钻爆法施工安全评价方法研究

为合理应用决策数据中不同专家的背景知识,找出地铁施工过程中安全测评体系的关注重点,根据地铁施工的特点和SHEL安全模型理论,建立以人-软件(L-S)、人-硬件(L-H)、人-环境(L-E)和人-人(L-L)4个环节为基础的钻爆法地铁施工安全指标体系。请专家给出指标语义评价等级和指标权重语义评价等级,并根据其与三角模糊数的对应关系分别得出三角模糊数评价值。针对不同专家的重要性程度差异,提出基于三角模糊数的群一致性评价方法,得出专家综合权重,集结评价数据,最终得到安全评价结果。最后,对青岛地铁1号线过海段进行实例分析。结果表明,该方法可以解决群评价过程中专家个体权威与群体共识难以兼顾的问题,能够充分利用群决策中的原始评价信息,提高地铁施工安全水平评价的准确性。     

浅谈工程设计对公路建设投资的影响和相应对策

通过工程设计对公路建设投资影响的分析,阐明了工程设计是影响建设投资的主要因素之一,并通过实例证明了合理选择设计方案和采用技术标准等办法是控制投资的一条有效途径,而合理选择设计方案和技术标准又受到各种因素的影响和限制,对影响合理选择设计方案的原因进行了具体分析,并就此提出了几点相应对策,供同行们参考.