Delay Restoration of Single-Track Railway Rescheduling

On the basis of analysis of the principle of delay restoration in a disturbed schedule, a heuristic algorithm for rescheduling trains is developed by restoring the total delay of the disturbed schedule. A discrete event topologic model is derived from the original undisturbed train diagram and a back propagation analysis method is used to label the maximum buffer time of each point in the model. In order to analyze the principle of delay restoration, the concept of critical delay is developed from the labeled maximum buffer time. The critical delay is the critical point of successful delay restoration. All the disturbed trains are classified into the strong-delayed trains and the weak-delayed trains by the criterion of the critical delay. Only the latter, in which actual delay is less than its critical delay, can be adjusted to a normal running state during time horizon considered. The heuristic algorithm is used to restore all the disturbed trains according to their critical details. The cores of the algorithm are the iterative repair technique and two repair methods for the two kinds of trains. The algorithm searches iteratively the space of possible conflicts caused by disturbed trains using an earfiest-delay-first heuristics and always attempts to repair the earliest constraint violation. The algorithm adjusts the weak-delayed trains directly back to the normal running state using the buffer time of the original train diagram. For the strong-delayed trains,the algorithm uses an utility function with some weighted attributes to determine the dynamic priority of the trains, and resolves the conflict according to the calculated dynamic priority. In the end, the experimental results show that the algorithm produces ＂good enough＂ schedules effectively and efficiently in disturbed situations.     

世界银行贷款项目“卫津路拓宽工程”的经济效益计算

本市以天津城市主干道卫津路拓宽改造工程为例，论述城市道路经济效益计算方法。按全天高峰小时、非高峰小时，分别计算机动车和非机动车的运营成本、时间价值及事故费用，采用有、无项目对比法．进行经济效益计算。经济效益中以车辆行程时间延误与路口时间延误的节约作为主要效益。     

Auto-ignition and micro-explosion behaviors of droplet arrays of water-in-fuel emulsion

The characteristics of auto-ignition and micro-explosion behaviors of one-dimensional arrays of fuel droplets suspended in a chamber with high surrounding temperature were investigated experimentally with various droplet spacings, numbers of droplet and surrounding temperatures. The fuels used were pure n-decane and emulsified n-decane with varied water contents ranging from 10 to 30%. All experiments were performed under atmospheric conditions with high surrounding temperatures. An imaging technique using a high-speed camera was adopted to measure ignition delay, flame lifetime, and flame spread speed. The camera was also used to observe micro-explosion behaviors. As the droplet array spacing increased, the ignition delay also increased, regardless of water content. However, the lifetime of the droplet array decreased as the droplet spacing increased. The micro-explosion starting time remained unchanged regardless of the number of the droplets or the droplet spacing; however, it tended to be delayed slightly as the water percentage and droplet spacing increased.     

�������ģ���������������ŶӺ�����Ԥ����һ�����о�

简单输入输出模型与冲击波分析是研究交通瓶颈问题的两种常用方法,本文着重分析两者的一致性。在数学推导中考虑到达需求与流出率的变化时,两者对于排队和延误的预测结果是一致的。在不同的交通和边界条件下,两者在拥堵形成至消散的任意时刻所得排队长度,拥堵时间等结果均是一致的。以往认为两种方法不一致的研究忽略了一些与背景交通密切相关的基本因素。实例分析说明正是这些基本因素使得这两种分析方法在不同流量－密度关系下都具有一致性。     

基于 M/G/1模型的停车场出口排队延误

通过对大型停车场高峰时段出口车辆行驶特性的调查研究,选取了车辆排队的出口车头时距以及出口服务时间两个指标。基于两个指标实测特性和 M/G/1排队模型的分析,计算了停车场出口理论平均排队时间。通过实测车辆平均排队时间,对理论模型计算的平均排队时间进行了修正。实例分析表明：排队时间修正模型能够准确地估计排队时间。提出了基于驾驶员容忍度的排队延误分级标准。     

���ڴ�С���ֳ��͵����źŽ���ڵȴ������о�

为了描述无信号交叉口混合车流的等待延误特性，论文建立了由大小两种车型构成的混合车流的等待延误公式。本文在分析了目前无信号交叉口延误研究方法存在某些不足的基础之上，以可接受间隙理论为基础，建立了无信号交叉口大小两种车型构成的次要车流的等待延误公式。通过选取适当的参数数据，分析了次要车流等待延误与主要车流流量、次要车流不同车型比例构成的关系，结果表明该公式较为符合无信号交叉口实际情况。     

基于希尔伯特变换的应力波波速估计的研究

研究基于希尔伯特变换的时间延迟估计方法及其算法,算法通过MATLAB语言编程实现。制作了4块混凝土板并在其上开展基于冲击反射法的双传感器波速测量实验,将互相关时延估计和希尔伯特变换时延估计应用到波速估计中,两者均能解决直接观察法中的人为误差的影响和噪声对测量精度的影响,取得比较满意的结果,希尔伯特变换时延估计得到的波速精度比互相关时延估计得到的波速估计精度更高。     

考虑排放因素的公交优先信号控制优化方法研究

以4相位单交叉口为研究对象,保持信号周期不变的情况下,以减少人的总延误和交叉口区域尾气排放量为目标,通过改变各相位绿灯时间来建立优化模型。运用粒子群算法对模型求解。仿真算例表明,此方法在降低交叉口区域人总延误的同时,减少了该区域内机动车尾气排放量,在保障车辆正常通行的情况下改善了环境质量。     

An investigation of the effects of pneumatic actuator design on slip control for heavy vehicles

Progress in reducing actuator delays in pneumatic brake systems is opening the door for advanced anti-lock braking algorithms to be used on heavy goods vehicles. However, little has been published on slip controllers for air-braked heavy vehicles, or the effects of slow pneumatic actuation on their design and performance. This paper introduces a sliding mode slip controller for air-braked heavy vehicles. The effects of pneumatic actuator delays and flow rates on stopping performance and air (energy) consumption are presented through vehicle simulations. Finally, the simulations are validated with experiments using a hardware-in-the-loop rig. It is shown that for each wheel, pneumatic valves with delays smaller than 3 ms and orifice diameters around 8 mm provide the best performance.     

高速公路改扩建作业区的合理布设

目前我国相关规范并没有对高速公路改扩建作业区的布设做出相应的规定,施工中的一些不合理设置大大降低了作业区的通行能力和运行效率,并且存在诸多安全隐患。针对这一问题,运用交通仿真技术对双向四车道高速公路基本路段的通行能力以及作业区各主要控制区段（如预告段、合流段等）的长度进行研究分析,得到高速公路改扩建期作业区的长度设置标准和布设要求,为今后高速公路改扩建工程作业区的设置提供参考。