高速公路施工中的测量工作

根据高速公路施工建设过程中的测量工作的特点全面介绍了施工前各测量工作的方法、步骤和施工期间公路中桩、边桩的计算和放样方法,并且针对不同情况提出了放样点的检核方法.     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

Hardware-in-the-loop testbed for evaluating connected vehicle applications

Connected vehicle environment provides the groundwork of future road transportation. Researches in this area are gaining a lot of attention to improve not only traffic mobility and safety, but also vehicles’ fuel consumption and emissions. Energy optimization methods that combine traffic information are proposed, but actual testing in the field proves to be rather challenging largely due to safety and technical issues. In light of this, a Hardware-in-the-Loop-System (HiLS) testbed to evaluate the performance of connected vehicle applications is proposed. A laboratory powertrain research platform, which consists of a real engine, an engine-loading device (hydrostatic dynamometer) and a virtual powertrain model to represent a vehicle, is connected remotely to a microscopic traffic simulator (VISSIM). Vehicle dynamics and road conditions of a target vehicle in the VISSIM simulation are transmitted to the powertrain research platform through the internet, where the power demand can then be calculated. The engine then operates through an engine optimization procedure to minimize fuel consumption, while the dynamometer tracks the desired engine load based on the target vehicle information. Test results show fast data transfer at every 200 ms and good tracking of the optimized engine operating points and the desired vehicle speed. Actual fuel and emissions measurements, which otherwise could not be calculated precisely by fuel and emission maps in simulations, are achieved by the testbed. In addition, VISSIM simulation can be implemented remotely while connected to the powertrain research platform through the internet, allowing easy access to the laboratory setup.     

双块式轨枕外形质量快速检测系统研制及应用

SK?2型双块式混凝土轨枕是高速铁路无砟轨道结构中的重要预制件,单一生产厂日均产量达到800~1400根,但目前的人工检测方式无法满足双块式轨枕的出厂检验要求。本文提出的双块式轨枕外形质量快速检测系统可满足TB/T 3397—2015《CRTS双块式无砟轨道混凝土轨枕》的出厂检验要求,与双块式轨枕生产线相匹配,大大提高了检测效率,实现了双块式轨枕全参数、自动化、智能化检测。检测数据自动上传至生产管理平台,可对双块式轨枕生产质量进行跟踪管理。     

A driver advisory system with dynamic losses for passenger electric multiple units

Driver advisory systems, instructing the driver how to control the train in an energy efficient manner, is one the main tools for minimizing energy consumption in the railway sector. There are many driver advisory systems already available in the market, together with significant literature on the mathematical formulation of the problem. However, much less is published on the development of such mathematical formulations, their implementation in real systems, and on the empirical data from their deployment. Moreover, nearly all the designed driver advisory systems are designed as an additional hardware to be added in drivers’ cabin. This paper discusses the design of a mathematical formulation and optimization approach for such a system, together with its implementation into an Android-based prototype, the results from on-board practical experiments, and experiences from the implementation. The system is based on a more realistic train model where energy calculations take into account dynamic losses in different components of the propulsion system, contrary to previous approaches. The experimental evaluation shows a significant increase in accuracy, as compared to a previous approach. Tests on a double-track section of the Mälaren line in Sweden demonstrates a significant potential for energy saving.     

船舶电缆自动化敷设系统设计与实现

在船舶电缆敷设过程中,很难借助有效的工装提高劳动效率,低空间的高强度作业存在严重的安全风险。以船舶电缆自动化敷设系统为分析对象,介绍系统组成和系统接口,采用比例积分微分(Proportion Integration Differentiation,PID)算法计算系统行程,通过PROFINET总线完成数据传输,以人机界面(Human Machine Interface,HMI)实现系统性能要求。在风电安装平台上的实际运用表明,该系统可解决造船行业劳动力成本高和安全风险大的问题。     

管道惯性测绘系统研制及应用

针对管道中心线地理坐标信息的测量需求,基于惯性导航原理,研制了以管道内检测器为载体的管道中心线测绘内检测设备,并将其与漏磁内检测器结合进行工程应用。选取了5处已知点对测绘结果进行了验证,测绘结果和实际验证结果表明:研制的惯性导航内检测器能够准确测绘管道中心线轨迹坐标,在校验点间距约为2 km时,5个距校验点约1 km的已知点的平均测绘误差约为1.8 m;通过将惯性导航检测器与漏磁检测器的组合使用,可有效获取管道缺陷的地理坐标信息,提高了管道内检测缺陷检测定位的精度。     

向量法在不规则隧道边仰坡面积计算中的应用

根据隧道边仰坡三维坐标测量数据,通过计算边仰坡斜面和投影水平面的法向量,进而计算两面之间夹角的方法,反算边仰坡斜面面积,在类似不规则隧道边仰坡等斜面面积计算中具有广泛的应用价值。     

新建隧道下穿多座隧道施工技术

以渝黔引入贵阳枢纽铁路龙宝冲隧道下穿6座已建及在建隧道工程为例,结合现场,详细分析、介绍了下穿隧道施工方案、原则、施工方法;提出了新建铁路隧道近距离下穿隧道交叉点附近施工爆破控制、防护方案,以及新建、既有隧道的监控量测、超前地质预报、安全性评估与评价等施工技术;解决了下穿隧道施工中既保证新建隧道施工安全,又保证既有隧道不受影响的问题。