智能型全站仪轨道基准网数据采集程序开发

研究目的:解决高速铁路轨道基准网(TRN)数据采集中测量任务繁重、观测精度要求高等问题,从而提高野外测量工作的效率和质量。研究结论:基于徕卡智能型全站仪GeoCOM的ASCII接口方式和高速铁路轨道基准网的测量原理与方法,轨道基准网数据采集程序(TRN DAS)实现了数据采集的自动化、数字化和高效化,大幅提高了野外测量工作的效率和质量,并已在沪宁、沪杭等高速铁路工程中推广应用,使用效果良好,具有明显的经济效益。     

城市轨道交通数字化智能保护技术研究

分析了目前国内城市轨道交通中压环网保护配置方案,针对目前保护配置的缺陷提出了一种全新的数字化智能保护技术,并对该技术进行了详细分析。     

LED综合节能照明装置在地铁工程中的应用

以深圳地铁2号线工程为例,讨论发光二极管(LED)综合节能照明装置的使用范围、类型参数、技术要求、控制方式,分析异型LED照明装置的布置情况,并对其节能效果进行评估。结果表明,单套LED综合节能装置能接收欧洲安装总线(EIB)控制系统的带有数字可寻址灯光照明接口(DALI)的调光信号,单灯具备可连续调光功能,可使整个车站根据不同模式及运营需求进行整体调光,具有明显的节能优势,且不会降低使用要求。     

考虑道路因素的智能车辆纵向运动决策与控制研究

针对智能车辆纵向运动时的交通道路适应性问题,考虑路面附着系数和前车运动速度等因素,研究了智能车辆纵向运动决策与控制方法。论文研究了基于车头时距的纵向运动决策方法并建立不同驾驶行为的目标车速模型,运用变论域模糊推理算法设计了目标加速度模型。基于纵向动力学模型,运用自适应反演滑模控制算法建立了驱动控制器和制动控制器。对高附着系数路面和低附着系数路面的行驶工况进行仿真试验验证,结果表明,在不同的附着系数路面和前车变速行驶条件下,智能车辆能实时、合理地决策目标车速、目标加速度,实现安全、高效、稳定的跟驰。     

Total cost analysis: An alternative to benefit-cost analysis in evaluating transportation alternatives

This paper explains the theory in support of total cost analysis (TCA) to compare transportation system alternatives. The full costs of each alternative are first aggregated, including travel time costs and monetizable environmental and social costs. Many costs which are considered on the benefits side of the equation in benefit-cost analysis (BCA) as "cost savings" are brought over to the costs side. Total cost differences among alternatives are then traded off against their estimated non-monetized benefits or impacts, just as a consumer trades off product quality against cost before deciding which product he or she will buy. One advantage of TCA over traditional BCA is that the concept of "total cost" is more easily understood by the public and by political decision-makers than BCA concepts such as "net present worth", "benefit-cost ratio" and "internal rate of return". A second advantage is that there is no suggestion that all "benefits" have been considered; decision-makers are free to use their own value judgements to trade off total cost against non-monetizable social, environmental and economic impacts, just as they trade off quality and convenience against cost when purchasing goods and services in their roles as consumers. The TCA approach is demonstrated in this paper through a case study of two systemwide alternatives for the Baltimore, MD urban area.     

上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

后置发动机城市公交车冷却系统的定性分析

简要介绍后置发动机城市公交客车冷却系统的布置结构,定性分析影响后置发动机城市公交客车冷却系统散热效果的各种原因,明确提高冷却系统散热效果的途径以及设计中的处理建议、注意事项等。     

高速公路"透层"及"下封层"的防水功能和施工技术

对黑色沥青路面早期破坏的原因进行了分析,介绍了"封层"、"下封层"所使用的材料及施工工艺,强调了现代智能型沥青洒布车的特点及其作用.指出使用智能型沥青洒布设备,重视"透层"、"下封层"材料及其洒布施工工艺是提高沥青路面修建质量的一个重要环节.     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.