新疆公路三级区划中环境参数的提出

自然环境条件对公路工程的影响，主要体现在路线选取、路基强度和稳定性、路面稳定性和耐久性、公路主要自然病害(包括冻融、翻浆、雪害、风沙害、崩塌、滑坡和地震灾害等)、施工条件和养护运营环境等5个方面，分析自然条件和公路工程的关系，提出公路区划中地质地貌环境参数和水热状况环境参数。阐述了环境参数的提出过程，为新疆公路自然区划三级区的划分提供依据。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

第三轨供电系统中受流器与第三轨的接触压力及其对受流性能的影响分析

介绍了第三轨受流器的结构原理。分析比较了弹簧式和气压式受流器与第三轨接触压力调节方式的特点。基于电接触基本理论详细的阐述了受流滑板与第三轨接触区的导电机理。接触区域的导电电路由无数微小的电阻及电容并联而成,接触压力通过影响微小电阻、电容的数量比例,进而影响接触面上的导电能力和磨损性能。标称静态接触压力的设计值接近或等于"法向压应力临界值"时,导电能力和磨损特性取得均衡。     

铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions

Time-variant reliability analysis of a corroded bulk carrier in intact and damage conditions is performed by First-Order (FORM), Second-Order (SORM) Reliability Methods and Importance Sampling simulation. Annual failure probabilities are determined up to 25-year ship lifetime, accounting for time-variant corrosion wastage of structural members contributing to hull girder strength. Statistical properties of hull girder capacity are determined by Monte Carlo simulation, applying three correlation models among corrosion wastages of structural members contributing to hull girder strength, namely no correlation, full correlation and full correlation among wastages of structural members belonging to the same category of compartments. A modified incremental-iterative method is applied, to account for instantaneous neutral axis rotation, in case of asymmetrical damage conditions, as for collision and grounding events. Incidence of intact/damage condition, as well as correlation among corrosion wastages, on annual sagging/hogging time-variant failure probability is investigated and discussed. Time-variant sensitivity analyses for intact and damage conditions are also performed, to investigate the incidence of random variables' uncertainties on the attained failure probability. Finally, the bulk carrier section scheme, benchmarked in the last ISSC Report, is applied as test case.     

隧道工程建设地质预报及信息化技术的主要进展及发展方向

复杂的不良地质条件是制约隧道安全高效建设的主要因素,要实现隧道工程的安全高效建设,首先要提高地质预测预报技术水平及其信息化程度。1)介绍我国复杂不良地质隧道超前预报的方法进展及其应用,包括突水突泥灾害源超前探测方法与设备、断层破碎带超前预报、城市地铁溶洞和孤石等探测的进展及应用等;2)介绍我国隧道岩爆监测预警方法及其应用,预报清楚之后就要加强安全风险过程监控;3)介绍基于BIM技术的建筑物(隧道工程)安全风险监控最新进展,包括安全风险实时感知系统和实时预警系统;4)指出隧道工程建设信息化技术的发展方向,包括开展基于大数据技术的TBM/盾构施工的分析与控制研究以及数字隧道向智慧隧道(建设和运营维护)的发展。     

高黎贡山隧道复杂地质条件下敞开式TBM施工关键技术研究

高黎贡山隧道地质条件极其复杂,可总结为"三高四活跃"。其中,高地热、高地应力、多断层破碎带、高压突涌水是制约TBM施工质量和安全的主要地质因素,将给TBM施工带来不可预估的风险。为了减少以上地质问题带来的TBM施工风险,通过资料查阅、调研国内外现有的TBM施工案例、专家咨询研讨、设计高适应性的TBM,并结合工程目前的施工状况,提出了TBM超前地质预报、钢筋排和钢拱架联合喷射混凝土及时支护、合理调整掘进参数等一系列确保TBM连续施工的方案与措施。研究结果可为即将进场施工的TBM提供理论参考。     

The Kalker book of tables for non-Hertzian contact of wheel and rail

A new regularisation of non-elliptical contact patches has been introduced, which enables building the look-up table called by us the Kalker book of tables for non-Hertzian contact (KBTNH), which is a fast creep force generator that can be used by multibody dynamics system simulation programs. The non-elliptical contact patch is regularised by a simple double-elliptical contact region (SDEC). The SDEC region is especially suitable for regularisation of contact patches obtained with approximate non-Hertzian methods for solving the normal contact problem of wheel and rail. The new regularisation is suitable for wheels and rails with any profiles, including worn profiles.

The paper describes the new procedure of regularisation of the non-elliptical contact patch, the structure of the Kalker book of tables, and parameterisation of the independent variables of the tables and creep forces.

A moderate volume Kalker book of tables for SDEC region suitable for simulation of modern running gears has been computed in co-simulation of Matlab and program CONTACT.

To access the creep forces of the Kalker book of tables, the linear interpolation has been applied.

The creep forces obtained from KBTNH have been compared to those obtained by program CONTACT and FASTSIM algorithm. FASTSIM has been applied on both the contact ellipse and the SDEC contact patch. The comparison shows that KBTNH is in good agreement with CONTACT for a wide range of creepage condition and shapes of the contact patch, whereas the use of FASTSIM on the elliptical patch and SDEC may lead to significant deviations from the reference CONTACT solutions.

The computational cost of calling creep forces from KBTNH has been estimated by comparing CPU time of FASTSIM and KBTNH. The KBTNH is 7.8–51 times faster than FASTSIM working on 36–256 discretisation elements, respectively.

In the example of application, the KBTNH has been applied for curving simulations and results compared with those obtained with the creep force generator employing the elliptical regularisation. The results significantly differ, especially in predicted creepages, because the elliptical regularisation neglects generation of the longitudinal creep force by spin creepage.     

柴油机起动过程缸内窜机油现象的可视化研究

在单缸机上利用内窥镜技术观察到了起动过程中缸内有窜机油的现象。采用图像分析和试验验证相结合的方法,分析了缸内窜机油现象发生的原因,研究了转速和进气压力对柴油机起动倒拖工况下缸内窜机油现象的影响,研究了起动着火运行时缸内的窜机油现象以及炭烟排放特性。研究表明:柴油机高转速起动倒拖工况下,在压缩上止点前后以及排气上止点后均有机油窜入缸内;当转速升高时,窜入缸内的机油量增加;当缸内压力升高时,窜入缸内的机油量减少;在起动着火过程中,运行初期缸内出现窜机油现象,随着发动机运行时间增加,窜机油现象消失,炭烟减少。     

立交线形动态拖动设计的关键技术

对立交线形动态拖动设计的几个关键技术进行论述.分析了缓和曲线计算精度,提出了动态拖动模式设计模型,以及约束满足条件下的非线性方程组的数值解算法.