电动助力转向系对汽车角输入响应影响的仿真

详细地分析和推导出了具有不同控制方式的EPS系统的传递函数，在Matlab环境中进行了仿真计算并对结果进行了分析，定性地说明了EPS系统的控制方式和结构参数对汽车转向盘角阶跃输入下的稳态、瞬态和频率响应特性的影响。     

低噪声电站噪声测量问题

分析了现实采用的几种移动电站噪声测量方法，根据实际发展需要。针对噪声测量中存在的一些问题，提出了低噪声电站噪声测量方法的一些看法。     

内燃机活塞-缸套-活塞环系统工作状态的识别方法

提出了一种基于证据理论方法的内燃机活塞—缸套—活塞环系统工作状态的识别方法。通过搭建试验台架,从实车试验中获取曲轴箱压力信号和机身振动加速度信号;提取试验特征值,组建模型样本和试验样本,并运用证据理论信息融合方法对内燃机的工作状态进行识别。研究结果表明:应用证据理论信息融合方法融合曲轴箱压力信号和机身振动加速度信号,进而识别活塞—缸套—活塞环系统的工作状态这一方法有效、可行。     

预应力混凝土箱梁桥横向受力分析方法的研究比较

以洋安大桥主桥5跨预应力混凝土变截面连续箱梁桥为背景,对其横向应力分别采用传统的平面框架法和空间有限元法进行分析比较,结果表明大部分关键截面平面框架法得到的横向应力远大于空间有限元法,在实际设计计算中须谨慎使用平面框架法。     

高速公路可变收费标准模型研究

在介绍可变收费的理论基础上,分析影响高速公路可变收费标准制定的主要因素,并讨论不同时段收费费率同交通量的关系。在设定的可变收费方案下,建立了出行者选择的二元logit模型,根据调研样本,采用最小二乘法对模型参数标定并对设定的可变收费方案进行评价,结果证明可变收费能使交通流在各时段合理分布,从而提高了高速公路的服务水平。     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

第三轨供电系统中受流器与第三轨的接触压力及其对受流性能的影响分析

介绍了第三轨受流器的结构原理。分析比较了弹簧式和气压式受流器与第三轨接触压力调节方式的特点。基于电接触基本理论详细的阐述了受流滑板与第三轨接触区的导电机理。接触区域的导电电路由无数微小的电阻及电容并联而成,接触压力通过影响微小电阻、电容的数量比例,进而影响接触面上的导电能力和磨损性能。标称静态接触压力的设计值接近或等于"法向压应力临界值"时,导电能力和磨损特性取得均衡。     

Spatiotemporal influence of land use and household properties on automobile travel demand

Understanding the patterns of automobile travel demand can help formulate policies to alleviate congestion and pollution. This study focuses on the influence of land use and household properties on automobile travel demand. Car license plate recognition (CLPR) data, point-of-interest (POI) data, and housing information data were utilized to obtain automobile travel demand along with the land use and household properties. A geographically and temporally weighted regression (GTWR) model was adopted to deal with both the spatial and temporal heterogeneity of travel demand. The spatial-temporal patterns of GTWR coefficients were analyzed. Also, comparative analyses were carried out between automobile and total person travel demand, and among travel demand of taxis, heavily-used private cars, and total automobiles. The results show that: (I) The GTWR model has significantly higher accuracy compared with the Ordinary Least Square (OLS) model and the Geographically Weighted Regression (GWR) model, which means the GTWR model can measure both the spatial and temporal heterogeneity with high precision; (II) The influence of built environment and household properties on automobile travel demand varies with space and time. In particular, the temporal distribution of regression coefficients shows significant peak phenomenon; and (III) Comparative analyses indicate that residents’ preference for automobiles over other travel modes varies with their travel purpose and destination. The above findings indicate that the proposed method can not only model spatial-temporal heterogeneous travel demand, but also provide a way to analyze the patterns of automobile travel demand.     

船舶企业农民工稳定措施研究

分析当前船舶企业用工短缺现象,认为企业应当改变思路,完善机制,充分了解尊重并充分考虑当前农民工的需求,采取稳定农民工的措施。     

System energy optimisation strategies for metros with regeneration

Energy and environmental sustainability in transportation are becoming ever more important. In Europe, the transportation sector is responsible for about 30% of the final end use of energy. Electrified railway systems play an important role in contributing to the reduction of energy usage and CO₂ emissions compared with other transport modes. For metro-transit systems with frequently motoring and braking trains, the effective use of regenerated braking energy is a significant way to reduce the net energy consumption. Although eco-driving strategies have been studied for some time, a comprehensive understanding of how regeneration affects the overall system energy consumption has not been developed. This paper proposes a multi-train traction power network modelling method to determine the system energy flow of the railway system with regenerating braking trains. The initial results show that minimising traction energy use is not the same as minimising the system energy usage in a metro system. An integrated optimisation method is proposed to solve the system energy-saving problem, which takes train movement and electrical power flow into consideration. The results of a study of the Beijing Yizhuang metro line indicate that optimised operation could reduce the energy consumption at the substations by nearly 38.6% compared to that used with the existing ATO operation.