几种典型的大型集装箱船导轨结构特性对比计算分析

本文以固定装载型式导轨和混合装载型式导轨为研究对象,基于有限元方法分析了不同集装箱装载工况对导轨强度、刚度的影响,同时在相同集装箱装载工况下,对不同导轨的强度、刚度进行了对比分析。结果可为集装箱导轨的设计优化提供了一定的参考。     

大型蓄电池修复装置的信号调理技术研究

为提高大型铅酸落后蓄电池修复装置的控制性能和修复效果,分析了蓄电池修复装置的布局特点,研究修复装置信号调理系统,设计了信号调理系统的各组成模块,应用信号调理工控机及数据采集卡模块,集成了先进、有效的大型蓄电池修复装置信号调理系统,为蓄电池修复装置提高电池的容量,发挥修复效果奠定基础。     

应用固有应变法计算焊接变形时材料模型的选择研究

分别采用理想弹塑性模型和双线性强化模型,推导出各自的固有应变计算公式,研究不同材料模型对于焊接结构变形的影响。研究结果表明,两种固有应变计算公式所预测的变形结果之间相对误差较小,即不同材料模型的选择对预测结构焊接变形的影响可以忽略。     

整体温差作用下高桩码头基桩内力计算方法

为研究高桩码头完建后整体温差对基桩内力的影响,结合工程实例,建立三维有限元模型,对上部平台温变规律进行分析,认为斜桩、直桩对上部平台温变约束作用均可忽略不计,平台处于自由温变状态,存在水平位移为零的温变发散中心。基于刚性平台自由温变规律,提出了考虑斜桩码头平动扭转的三维算法,三维算法的桩顶位移、内力与有限元结果接近。对于全直桩或近似对称的斜桩码头,还可简化为平动的二维算法。并给出了直桩、斜桩内力的估算简式,由估算式可知,位于发散同心圆上的直桩内力大于斜桩内力,桩顶轴力、弯矩与桩径2次、4次方成正比,桩径对温差内力的影响显著。     

航道整治建筑物薄壁大圆筒结构水槽试验研究

基于薄壁大圆筒结构在国内外沿海港口码头和防波堤工程中研究及应用现状,设计一种薄壁大圆筒结构坝。采用水槽试验的技术手段,研究大水深、大流速情况下坝体稳定性和抗倾临界条件,得到无充填、充填天然沙及带基座的充填薄壁大圆筒结构在水深34 m条件下抗倾流速分别为2.90、3.18及4.95 m/s,认为其能满足不同河流的航道整治建筑物稳定要求,可作为丁坝、顺坝、导流坝及潜坝等多种结构形式在内河航道整治工程中推广运用。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

大型升船机卷筒与主轴连接技术

大型升船机承载能力大,若卷筒与主轴仍采用常规连接形式很难满足要求。分析了卷筒与主轴的各种连接结构,针对景洪升船机开发一种新的连接技术,解决了加工和装配的工艺难题。通过理论计算确定结构尺寸,成功完成了16件大型卷筒装置的设计生产加工。     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。