超深振捣条件下混凝土墙体模板侧压力的简化计算方法

超深振捣对混凝土成品质量有害无益,研究超深振捣引起模板侧压力增大的规律,可为规避其害提供依据。为此设计4个混凝土墙体试件,实测在浇筑过程中模板侧压力的变化情况。基于振捣液化和液体压力平衡理论,建立了超深振捣情况下混凝土模板侧压力计算模型,推导了计算公式,并与实验数据进行对比验证。研究结果表明,振捣深度是影响混凝土墙体模板侧压力的重要因素,本文提出的计算模型能很好地预测墙体结构超深振捣位置的模板侧压力。     

In Touch通过以太网和OMRON PLC进行连接的方法

为提高工作效率,将In Touch与Omron PLC连接。介绍了先进的人机界面软件In Touch的功能特点,In Touch与Omron PLC的几种通信方法、注意事项。该方法在散粮系统实际应用中取得了可靠的通信质量。     

Delivering improved alerts,warnings, and control assistance using basic safety messages transmitted between connected vehicles

When vehicles share their status information with other vehicles or the infrastructure, driving actions can be planned better, hazards can be identified sooner, and safer responses to hazards are possible. The Safety Pilot Model Deployment (SPMD) is underway in Ann Arbor, Michigan; the purpose is to demonstrate connected technologies in a real-world environment. The core data transmitted through Vehicle-to-Vehicle and Vehicle-to-Infrastructure (or V2V and V2I) applications are called Basic Safety Messages (BSMs), which are transmitted typically at a frequency of 10 Hz. BSMs describe a vehicle’s position (latitude, longitude, and elevation) and motion (heading, speed, and acceleration). This study proposes a data analytic methodology to extract critical information from raw BSM data available from SPMD. A total of 968,522 records of basic safety messages, gathered from 155 trips made by 49 vehicles, was analyzed. The information extracted from BSM data captured extreme driving events such as hard accelerations and braking. This information can be provided to drivers, giving them instantaneous feedback about dangers in surrounding roadway environments; it can also provide control assistance. While extracting critical information from BSMs, this study offers a fundamental understanding of instantaneous driving decisions. Longitudinal and lateral accelerations included in BSMs were specifically investigated. Varying distributions of instantaneous longitudinal and lateral accelerations are quantified. Based on the distributions, the study created a framework for generating alerts/warnings, and control assistance from extreme events, transmittable through V2V and V2I applications. Models were estimated to untangle the correlates of extreme events. The implications of the findings and applications to connected vehicles are discussed in this paper.     

铁路沿线城市空间物业开发研究——以宝鸡市南客站核心区站前广场工程为例

为了提升铁路沿线城市空间物业开发的设计手法,结合宝鸡市南客站核心区站前广场工程的设计实践,从系统性设计观、工程性质解析、消防设计思路、空间建构方法、无缝接驳、技术要素等方面进行研究分析,展示将铁路与城市系统进行一体化设计、利用自然资源解决消防和投资问题、平层空间中对多种交通体系的有机组织、不同坐标和高程系统背景下分区域构建柱网、各板块交接处的问题解决等技术成果,总结出同类型建筑的设计思路,力求为该领域的建筑设计发展提供有益的借鉴。     

新城区轨道交通线路规划关键问题研究

对国内外主城与新城衔接的新城区(郊区)轨道线特征及交通功能等因素进行总结分析，并结合武汉市及国内外典型城市新城区轨道交通规划建设经验，对新城区轨道交通线路规划关键问题做深入研究。提出对新城区轨道交通线路规划中与其他不同层次轨道线网功能及技术标准的衔接关系；与新城区发展应注重以轨道交通引领新城区协同发展，与城市空间结构高度契合关系；新城区轨道线路走向应沿预测主要客流走廊，串联新城区商业、交通枢纽等大型客流集散点，以缓解开通初期普遍面临客流量增长缓慢，客运强度偏低的问题。     

高速公路连续箱梁桥独柱墩横向抗倾覆计算及安全性评估

连续梁桥由于结构刚度大、桥面变形小、动力性能好、变形曲线平顺、有利于高速行车等优点,是中小型桥梁的主要结构形式之一,得到了广泛的应用和发展。但是由于超载、偏载以及支座布置不合理等原因,近年来我国连续梁桥出现了多例整体失稳的事故,且事故大多出现在独柱墩连续梁桥上。针对最近发生的独柱墩桥梁倾覆事件,采用有限元程序Midas Civil对拟建的武深高速公路项目中连续箱梁桥独柱墩抗倾覆系数及独柱墩处箱梁支座转角进行验算,并与规范及《广东省高速公路独柱墩连续箱梁桥横向抗倾覆安全性评估验算指导意见》中要求的指标进行对比,对连续箱梁桥独柱墩横向抗倾覆安全性进行合理评估。     

复杂地形条件下桥隧相连隧道洞口结构设计研究

蒙华铁路坪桥1号隧道进口洞顶基岩外凸、洞顶以下岩面高且直立、洞顶上部地形偏压高陡,地形条件极其复杂。营盘山大桥与坪桥1号隧道进口紧密相连,存在桥台与隧道洞门结构相互干扰以及边坡防护、隧道出洞和洞口场地布置等一系列难题,设计难度极大。为解决这些难题,通过对现场实际地形、地质情况进行研究,对比分析"整体式"与"分离式"桥隧相连结构的优缺点,提出桥台与隧道相结合的"整体式"桥隧相连结构方案;同时,针对地形偏压高陡,提出非对称结构设计方案,实现了隧道"零"仰坡出洞,解决了洞口边坡防护的难题;最后,提出架立临时贝雷梁的方案,解决了隧道出洞及洞口场地布置的难题。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

多点后方交会法在地铁竖井联系测量中的应用

竖井联系测量工作的可操作性及准确性对矿山法隧道施工至关重要.以广州市轨道交通21号线某标段2号隧道为研究对象,基于施工竖井结构及现场环境的特殊性,对用于辅助测量的4根钢丝距离和角度进行观测,再利用多点后方交会及钢丝坐标传递原理实现井上和井下坐标传递.研究表明,在隧道开挖至40～60 m、100～150 m、贯通前150...     

精轧螺纹吊底平台在大体积高桩墩台中的应用与创新

从工程实际出发,对墩台施工水上作业平台工艺进行对比分析,介绍精轧螺纹吊底平台的工艺特点、原理、流程及操作要点。结合全直桩基墩台结构特点,对桩基与上部结构连接方式的设计进行创新,在钢管桩外侧设置4块扇形钢板,并围焊成环形,与精轧螺纹吊底平台共同形成一种新型组合支承结构,提高吊底和底模的周转率,加快工程进度,确保大体积高桩墩台施工的安全和质量,经济和技术效益明显。可为类似墩台施工、钢管桩与上部结构连接方式设计提供参考。