柴油机状态在线监测与故障诊断系统开发

介绍了状态监测与故障诊断系统的原理和方法,使用LabVIEW平台及多功能数据采集卡研制柴油机的故障诊断系统。提出了几种特征参数分析方法,开发了多个子仪器,可较好的对柴油机的不同故障进行监测。     

机场轨道交通对陆侧交通分流情况的预测研究

机场轨道交通的发展将是解决机场陆侧交通拥堵问题的主要途径之一.本文首先通过灰色预测模型GM(1,1)对首都机场的陆侧交通量进行预测,得出进出机场的旅客中乘坐机场巴士及出租车的人数.在此基础上,运用排队论的方法,分析机场轨道交通对机场巴士及出租车交通量的分流情况,得出各自具体的分流率和分流量.最后,根据马尔可夫链的方法,对分流情况的发展趋势进行分析,得出其稳定分流率.     

圆截面钢管砼构件极限弯矩分析

分析了圆截面钢管砼构件在弯曲极限状态下,钢管和砼相互作用而产生的两种套箍作用效果;推导了理想塑性状态下的中和轴位置和极限弯矩的计算方法.     

基于设施属性的城市轨道交通融资模式

以项目区分理论为理论基础,从轨道交通的基本属性入手,按照可经营性和可拆分性对轨道交通基本设施进行分类,对不同属性的设施进行组合.按照所有权和经营权是否转移,将各种适用于轨道交通的融资方式进行分类;并将两者进行匹配,提出了符合轨道交通客观发展规律、可供轨道交通建设发展采用的多元化融资模式及其评价方法.     

细粒土路基平衡密度状态分析

为掌握细粒土路基的平衡密度状态及其变化原因,统计分析9条高速公路路床顶部的压实度和含水率检测资料,对3条黄泛区高速公路路基的压实度、含水率以及1条高速公路的路基模量进行全断面深度检测,并开展非饱和细粒土的湿化试验和弹性恢复试验。现场实测发现：在役路基除了实测含水率较最佳含水率有0~13.8%的增加外,相应的压实度出现了0~10%的线性衰减;其中,路床区、上路堤以及受水位波动影响较大的路基底部的压实度降低十分明显,而下路堤上部区域压实度基本维持不变甚至有所增大;路基压实度的变化与土的含水率密切相关。非饱和土三轴试验结果表明：土体湿化过程中,吸水导致体积膨胀和压实度衰减;当路床土吸湿至平衡湿度（含水率为18%）时,土体压实度降低5.07%。弹性恢复试验结果表明：压实路基土因变形恢复导致路基密度衰减;低含水率、高压实度和低上覆荷载条件下的弹性恢复较大,压实路床土弹性恢复导致的压实度降低值最大为0.5%;综合湿化和弹性恢复结果来看,两者占黄泛区路床区压实度衰减总量（约7%）的79.6%;此外,路基剪切模量的原位实测值较相同物理状态下的室内重塑土结果平均高出了60.64%,表明运营多年的高速公路路基土具有一定的结构性。因此,既有路基的评价应该同时考虑路基湿度增加、密度降低以及土体结构性等综合因素。     

Electric vehicle charging station locations: Elastic demand,station congestion,and network equilibrium

Battery-only electric vehicles (BEVs) generally offer better air quality through lowered emissions, along with energy savings and security. The issue of long-duration battery charging makes charging-station placement and design key for BEV adoption rates. This work uses genetic algorithms to identify profit-maximizing station placement and design details, with applications that reflect the costs of installing, operating, and maintaining service equipment, including land acquisition. Fast electric vehicle charging stations (EVCSs) are placed across a congested city's network subject to stochastic demand for charging under a user-equilibrium traffic assignment. BEV users’ station choices consider endogenously determined travel times and on-site charging queues. The model allows for congested-travel and congested-station feedback into travelers’ route choices under elastic demand and BEV owners’ station choices, as well as charging price elasticity for BEV charging users.Boston-network results suggest that EVCSs should locate mostly along major highways, which may be a common finding for other metro settings. If 10% of current EV owners seek to charge en route, a user fee of $6 for a 30-min charging session is not enough for station profitability under a 5-year time horizon in this region. However, $10 per BEV charging delivers a 5-year profit of $0.82 million, and 11 cords across 3 stations are enough to accommodate a near-term charging demand in this Boston-area application. Shorter charging sessions, higher fees, and/or allowing for more cords per site also increase profits generally, everything else constant. Power-grid and station upgrades should keep pace with demand, to maximize profits over time, and avoid on-site congestion.     

ISS-based robust adaptive fuzzy algorithm for maintaining a ship's track

This paper focuses on the problem of linear track keeping for marine surface vessels. The influence exerted by sea currents on the kinematic equation of ships is considered first. The input-to-state stability(ISS) theory used to verify the system is input-to-state stable. Combining the Nussbaum gain with backstepping techniques,a robust adaptive fuzzy algorithm is presented by employing fuzzy systems as an approximator for unknown nonlinearities in the system. It is proved that the proposed algorithm that guarantees all signals in the closed-loop system are ultimately bounded. Consequently,a ship's linear track-keeping control can be implemented. Simulation results using Dalian Maritime University's ocean-going training ship 'YULONG' are presented to validate the effectiveness of the proposed algorithm.     

随机交通分配中有效路径的确定方法

对用于随机交通分配的三种不同路径进行了比较和分析,研究了无环简单路径的寻求方法和无环简单路径集上的随机交通分配问题。重新定义了有效路径,提出通过利用求解确定性用户均衡分配问题的迭代过程来产生有效路径的启发式方法,算例表明该方法是有效性的.     

预应力混凝土连续箱梁桥混凝土疲劳应力限值研究

大量预应力混凝土连续箱梁桥在服役期内发生腹板斜裂缝病害,引发了研究人员对于混凝土疲劳应力问题的探讨．结合中国的预应力混凝土桥涵设计规范与混凝土结构设计规范（GB50010—2002）、英国BSEN1992—1—1混凝土设计细则、欧洲CEB—FIPMC1990规范和美国AASHTO2004规范关于混凝土疲劳应力验算的规定,对混凝土疲劳应力验算方法进行了比较．并以某预应力混凝土连续箱梁桥为例,对各规范中混凝土疲劳验算的具体过程进行了计算与分析,验证了规范的合理性以及适用性．分析结果表明,中国规范的疲劳应力限值较国外规范偏高．在对构件进行疲劳设计时,推荐采用CEB—FIP规范提供的验算方法．     

基于T-S模糊模型的多轴转向车辆H_∞鲁棒控制

为解决多轴转向车辆模型非线性和各种干扰影响下的控制问题,分析了轮胎非线性和外界干扰,建立多轴转向车辆的二自由度非线性模型,应用T-S模糊理论,将其转换为局部线性的T-S模糊模型。基于并行分配补偿法(PDC)和H∞鲁棒控制理论,设计了转向系统的模糊PDC H∞鲁棒控制器,并利用线性矩阵不等式和模糊逻辑控制工具求解控制器。在正弦波和阶跃信号干扰下,车速为80km.h-1时,进行前轮转向回正和前轮角阶跃输入转向的仿真试验。仿真结果表明:侧偏角和横摆角速度动态响应的超调均为0,且均在0.06s内达稳态值;前轮转向回正试验的侧偏角和横摆角速度稳态值均为0,前轮角阶跃输入转向试验的相应值分别为0和1.2(°).s-1,且稳态横摆角速度增益为0.24[(°).s-1].(°)-1。这说明了多轴转向车辆在模糊PDC H∞鲁棒控制下的高速转向平稳迅速,T-S模糊建模和鲁棒控制器设计算法对解决轮胎非线性和外界干扰影响是有效的。