基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

浅层地下水开采对高速铁路工程的影响及对策

研究目的：研究掌握浅层地下水开采引起的地面沉降特征及其对高速铁路工程的影响,提出针对性的防治对策与工程措施,供高速铁路勘测、设计及施工参考。研究方法：结合华北平原地面沉降情况,建立浅层地下水开采引起地面沉降的固结沉降模型。研制离心场中地基抽水的模拟和测量系统,进行了离心模型试验,测量抽水过程中粉土地基孔隙水压力和沉降的变化及分布规律,并对比分析了对不同型式桥梁的影响。研究结果：对浅层地下水开采引起的地面沉降机理进行初步分析,基于离心模型试验结果探讨了浅层抽水引起地基沉降的过程和特征,评价了地基不均匀沉降对特殊桥梁形式的影响,并提出了针对性的防治措施和对策。研究结论：浅层地下水开采造成的不均匀沉降对高速铁路工程的影响较大,需通过控制线路附近地下水开采、采取适宜的工程结构措施加以防治。     

地铁屏蔽门系统构成分析

文章较详细地介绍了广州地铁使用的屏蔽门系统,重点是它的机械和电气部分的组成和作用.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

直线感应电动机数据采集系统

针对用于磁悬浮列车的直线感应电动机实验台,介绍了一套对直线感应电动机实验数据进行采集、分析和处理的数据采集系统。该系统可对实验中的各种数据进行实时采集、显示、控制、存储和分析。     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

EMS型磁悬浮列车运行阻力计算

就传统的轮机列车和ＥＭＳ型磁悬浮列车运行时所受到的阻力进行了简要分析，着重计算了ＥＭＳ型磁悬浮列车的电磁阻力，并提出了青城山试验示范线磁悬浮列车对直线电机驱动功率的要求。     

多值非线性系统的自适应控制

提出了带有多值非线性环节的线性离散系统的自适应控制算法，仿真实验的结果表明：该算法简单易行具有明显的优点，跟踪误差比采用一般的自适应控制算法时要小得多，且能保证闭环系统大范围近收敛。     

编组站驼峰车辆溜放速度控制系统的研究

以计算机和红外线传感器为主，研制了编组站驼峰车组溜放速度控制系统，系统通过检测车辆溜放的速度，计算出所需制动力的大小，通过缓器对车辆溜放进行速度控制，并具有对解体车辆自动计数，各种故障报警等功能。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。