Determination of Critical Slip Surface of Soil Slope

A new complex method is presented considering not only the improvement upon the ＂bad ＂design point, but also the diversity of the newly generated complex, which is obtained by replacing the ＂bad ＂design point with the better design point located at the line between the ＂bad ＂design point and the ceotroid of the remaining design points of the old complex. The new complex method is applied to searching for the critical slip surface of two non-homogeneous soil slopes. The comparison of the results obtained by the new complex method with that by the basic complex method shows that the new complex method is much more likely to find the true critical surface for the randomly generated initial complex.     

转K2型转向架弹簧载荷识别及其对弹簧寿命影响的研究

用试验的方法得到在垂直载荷作用下弹簧45°方向应力和最大主应力之间的差异,用有限元法计算了弹簧在横向、垂向加载时的载荷识别系数。根据线路实测动应力识别出转K2型转向架弹簧在运用工况下的2种载荷。最后根据载荷计算出弹簧的应力,利用疲劳损伤模型计算出损伤,得出了2种载荷对疲劳寿命的影响。     

基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

工程机械柴油机的匹配选择

为选择适应工程机械使用特点的柴油机，对工程机械配套的柴油机选型方式进行了概括分析，着重介绍在柴油机对比选择时的关键性能参数。说明了工程机械用柴油机抗过载能力的特殊要求，总结出通过性能参数和曲线的对比来匹配选择柴油机的方法。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

NL法在板桩墙计算中的应用

在水平荷载作用下的板桩墙的计算中,应用非线性方法——NL法来考虑桩土的相互作用,利用相似原理求出桩的受力特性,并举出算例。计算过程证明NL法是一种简单快捷的方法。     

同步发电机参数辨识的相关方法探讨

随着电网安全及稳定运行问题的重要性日益突出,基于获得准确的系统模型和参数辨识方法,优化同步发电机相关参数将是十分有意义的。本文针对当今几种比较典型的参数辨识方法做了系统的介绍,通过比较得出何种方法对于同步电机的参数辨识是最适合的。     

港口腹地划分的两种新方法探讨--以大连国际航运中心为例

引入经济地理学的新理论成果———圈层结构法和点轴法,提出了圈层结构划分法和点轴结构划分法两种新的港口腹地划分方法,并应用这两种新方法对大连国际航运中心港口腹地范围的界定与划分进行实例分析。与以往的行政区划法、经济区域法等港口腹地划分方法相比,这两种方法更加注重对港口原有腹地的细分,更接近于港口腹地的实际状况,进而有利于港口企业的经营发展。