A systematic analysis of multimodal transport systems with road space distribution and responsive bus service

A smart design of transport systems involves efficient use and allocation of the limited urban road capacity in the multimodal environment. This paper intends to understand the system-wide effect of dividing the road space to the private and public transport modes and how the public transport service provider responds to the space changes. To this end, the bimodal dynamic user equilibrium is formulated for separated road space. The Macroscopic Fundamental Diagram (MFD) model is employed to depict the dynamics of the automobile traffic for its state-dependent feature, its inclusion of hypercongestion, and its advantage of capturing network topology. The delay of a bus trip depends on the running speed which is in turn affected by bus lane capacity and ridership. Within the proposed bimodal framework, the steady-state equilibrium traffic characteristics and the optimal bus fare and service frequency are analytically derived. The counter-intuitive properties of traffic condition, modal split, and behavior of bus operator in the hypercongestion are identified. To understand the interaction between the transport authority (for system benefit maximization) and the bus operator (for its own benefit maximization), we examine how the bus operator responds to space changes and how the system benefit is influenced with the road space allocation. With responsive bus service, the condition, under which expanding bus lane capacity is beneficial to the system as a whole, has been analytically established. Then the model is applied to the dynamic framework where the space allocation changes with varying demand and demand-responsive bus service. We compare the optimal bus services under different economic objectives, evaluate the system performance of the bimodal network, and explore the dynamic space allocation strategy for the sake of social welfare maximization.     

汽车前照灯闪烁问题分析及设计优化

汽车前照灯是整车照明的重要组成,随着时代的发展,汽车前照灯的设计也越来越简单化、多样化。本文针对某车型项目阶段出现的前照灯闪烁问题,从前照灯的控制逻辑展开,分析故障产生的原因,并研究优化方案。     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

营运大客车正面碰撞乘员伤害的研究

客车发生正面碰撞事故约占客车碰撞事故的50%~60%。利用LS-DYNA软件,建立了包括假人、安全带和安全气囊在内的大客车车体有限元模型,对不同速度下营运大客车的正面碰撞特性进行了模拟仿真计算,分析了无任何保护措施、佩戴安全带及佩戴安全带且安全气囊起爆三种事故形态下乘员头部HPC值、胸部压缩量和大腿骨轴向接触力等伤害值。研究结果表明,安全带对于驾驶员的保护意义重大,为营运大客车乘员保护设计以及合理制定营运大客车正面碰撞法规提供数据参考。     

基于多源数据的公交车能耗碳排放测算模型

公交车能耗碳排放强度与车辆、线路和驾驶员有显著相关关系，为精准刻画其能耗碳排放强度特征，整合OBD监测数据、加油(气)数据、运营排班数据等多源数据资源. OBD监测数据和加油(气)数据呈显著的线性关系，证明修正后的OBD监测数据可满足分析要求. 搭建“速度-能耗碳排放强度曲线”测算模型，幂函数关系的拟合优度R2 =0.972 6 为最高. 实证研究发现，平均速度在10~60 km/h 变化时，液化天然气(LNG)车比柴油车能耗碳排放强度高 3.3%~33.7%，双层车比铰接车高2.4%~13.3%；LNG铰接车在不同线路、相同速度下的强度相差9.6%；不同驾驶员在相同线路的能耗碳排放强度可相差24.2%. 模型为各城市基于多源数据开展公交能耗碳排放目标设定提供数据支撑.     

A cost-competitiveness analysis of charging infrastructure for electric bus operations

This study investigates the cost competitiveness of different types of charging infrastructure, including charging stations, charging lanes (via charging-while-driving technologies) and battery swapping stations, in support of an electric public transit system. To this end, we first establish mathematical models to investigate the optimal deployment of various charging facilities along the transit line and determine the optimal size of the electric bus fleet, as well as their batteries, to minimize total infrastructure and fleet costs while guaranteeing service frequency and satisfying the charging needs of the transit system. We then conduct an empirical analysis utilizing available real-world data. The results suggest that: (1) the service frequency, circulation length, and operating speed of a transit system may have a great impact on the cost competitiveness of different charging infrastructure; (2) charging lanes enabled by currently available inductive wireless charging technology are cost competitive for most of the existing bus rapid transit corridors; (3) swapping stations can yield a lower total cost than charging lanes and charging stations for transit systems with high operating speed and low service frequency; (4) charging stations are cost competitive only for transit systems with very low service frequency and short circulation; and (5) the key to making charging lanes more competitive for transit systems with low service frequency and high operating speed is to reduce their unit-length construction cost or enhance their charging power.     

Commuting and wellbeing: a critical overview of the literature with implications for policy and future research

ABSTRACT

This review provides a critical overview of what has been learnt about commuting’s impact on subjective wellbeing (SWB). It is structured around a conceptual model which assumes commuting can affect SWB over three time horizons: (i) during the journey; (ii) immediately after the journey; and (iii) over the longer term. Our assessment of the evidence shows that mood is lower during the commute than other daily activities and stress can be induced by congestion, crowding and unpredictability. People who walk or cycle to work are generally more satisfied with their commute than those who travel by car and especially those who use public transport. Satisfaction decreases with duration of commute, regardless of mode used, and increases when travelling with company. After the journey, evidence shows that the commute experience “spills over” into how people feel and perform at work and home. However, a consistent link between commuting and life satisfaction overall has not been established. The evidence suggests that commuters are generally successful in trading off the drawbacks of longer and more arduous commute journeys against the benefits they bring in relation to overall life satisfaction, but further research is required to understand the decision making involved. The evidence review points to six areas that warrant policy action and research: (i) enhancing the commute experience; (ii) increasing commute satisfaction; (iii) reducing the impacts of long duration commutes; (iv) meeting commuter preferences; (v) recognising flexibility and constraints in commuting routines and (vi) accounting for SWB impacts of commuting in policy making and appraisal.     

中国TBM施工技术进展、挑战及对策

总结我国近30年来TBM设计与施工技术的发展历程,可归纳为以下5个阶段:1)研发探索和试用阶段;2)以国外施工承包商为主体,采用国外设计制造TBM施工我国隧道工程阶段;3)独立进行TBM招标采购和选型设计,并建立起自主的TBM施工队伍阶段;4)与国外厂家联合设计制造TBM,工程应用和自主施工快速发展阶段;5)实现TBM国产化,面向国内外TBM工程市场自主施工阶段。通过我国不同时期TBM施工的典型工程,介绍我国在复杂地质、大坡度、高海拔、不同直径、不同机型、超长隧洞TBM施工方面取得的经验、技术积累和业绩,展示我国TBM在穿越断层破碎带、软弱变形、岩爆、涌水等不良地质洞段取得的一系列施工新技术,以及最高月进尺1 868 m、平均月进尺超过600 m和掘进作业利用率超过40%的掘进技术水平。分析TBM在极硬岩、大断层破碎带、软弱大变形围岩、强岩爆围岩、涌水突泥洞段、高地热隧洞和超长隧洞工程中施工面临的风险和挑战,并提出一些相应的技术措施和对策,期望这些措施和对策在未来大量实际工程中进一步得到实践验证、优化和改进,不断积累和创新TBM设计与施工新技术。     

基于发动机台架考核方法的气缸盖高周疲劳特性研究

依据发动机台架考核规范,运用疲劳强度理论,对某铸铁气缸盖进行高周疲劳强度评估。明确温度和应力随考核工况改变的变化行为,研究气缸盖各区域受工作载荷的影响状况,为缸盖寿命评估模型提供载荷边界。结合疲劳理论,在考虑材料修正的基础上进行了疲劳特性分析和损伤状况分析。分析表明,气缸盖各区域的疲劳安全系数均大于1,视为安全,但冷却钻孔区域的安全裕度较小。     

桩基施工中的坍孔原因与预防措施

对在一般河流上钻(冲)孔过程中出现坍孔原因进行分析,并提出了坍孔预防措施.