沥青路面车辙成因及防治措施

在对沥青路面车辙的类型及其特征阐述的基础上,归纳总结车辙产生的内在因素和外在因素,并提出相应的预防和处理措施。实践证明,这些预防和处理措施可以很好地预防车辙,并可以较好地提高原沥青路面的服务功能。     

Time-variant ultimate longitudinal strength of corroded bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This paper uses a set of the time-dependent corrosion wastage models for 23 different member locations/categories of bulk carriers previously developed by the authors, based on the available corrosion measurements for existing large bulk carrier structures. Differences due to the location and corrosion severity of every member type are taken into account. The nominal design corrosion values for the primary members are suggested based on the annualized corrosion rates obtained in the present study. The effect of time-variant corrosion wastage on the ultimate hull girder strength as well as the section moduli is studied. The criteria for repair and maintenance of heavily corroded structural members so as to keep the ultimate longitudinal strength at an acceptable level are discussed. Important insights and conclusions developed are summarized.     

城市快速公交专用道道路线形设计分析

以汽车的动力特性和通过特性为理论依据,根据目前快速公交专用车辆大都采用低地板大型铰接底地板车辆的现状,结合其容量比一般普通公交大得多的特点,对快速公交专用道的道路线形设计进行分析,提出设计方法。     

地震灾后公路重建工程施工工艺

通过调查汶川地震灾后212国道某公路段的通行能力及损坏情况，详细论述了对该路段进行灾后公路改建的路面设计、施工工艺，分析了施工过程中温度控制、接缝处理等问题，以及施工安全和保畅通措施，为其他灾后公路重建工程提供了宝贵经验。     

客车底盘纵梁数控冲孔生产线

简要介绍客车底盘纵梁数控冲孔生产线的发展历史与现状；着重介绍SPU12—32-4型汽车U型纵梁三面数控冲孔生产线和SPTB120—10型纵梁数控平板冲孔生产线的特点。     

车辆阻力对站线坡度设计的影响研究

根据车辆所受基本阻力、曲线阻力、坡道阻力、风阻力、道岔阻力,建立车辆单位基本阻力模型及数学表达式,运用车辆参数及风阻力参数,对车辆相关状态进行分析计算,研究表明:线路纵坡即使为平坡,亦存在溜逸安全隐患,必须采取措施才能保证安全;对《站规》站线纵坡标准,进行安全评估,提出利用停车顶改善车辆停放状态的措施意见及计算办法;利用减速顶做功耗能可以提高装车线线路纵坡,从而满足定量快速装车或轨道衡计量系统的技术要求,为线路纵坡设计提供依据,拓宽站场调速设备应用领域,创新工程设计方法,为工程综合优化设计提供理论基础,供设计分析及计算参考。     

中低速磁悬浮列车线路选线参数分析--坡度值计算与分析

结合CMS-3型磁悬浮列车，分析选线参数中坡度值计算应考虑的问题，导出计算方法，并结合长沙中低速磁悬浮列车试验线和八达岭旅游示范线的设计实例，给出设计结果。     

列车纵向冲击的检测与分析

针对列车纵向冲击问题,提出了信号采集与处理方案,设计了一套随车采集和分析系统。文中介绍了系统组成、工作原理及运行过程,初步建立了纵向冲击与旅客乘坐舒适度之间的数学模型,并运用该模型进行了实际演算,取得了预期的效果。     

A probabilistic damage tolerance concept for welded joints Part 2: a supplement to the rule based S–N approach

The first part of this paper presented the required statistics and stochastic models for reliability analysis of the fatigue fracture of welded plate joints. This present Part 2 suggests a probabilistic damage tolerance supplement to the design S–N curves for welded joints. The goal is to provide the practising engineer with simple tools that predict the reliability against fatigue fracture during service life. The impact of the chosen fatigue design factors (FDF) and the uncertainty in the applied stresses is revealed. The effect of an in-service inspection programme is also predicted. The results are presented as dimensionless matrices and suggested for use in support of decision-making at the design stage, without any advanced fracture mechanics modelling and stochastic simulation. One important advantage of this format is that the probability levels are presented regardless of actual weld class and target service life (TSL). This is obtained by introducing the FDF as a key parameter to the results. This parameter is defined as the ratio of predicted fatigue life over TSL. FDF is always calculated in the S–N approach which is mandatory in fatigue life prediction. Various welded details (classes) will have the same reliability level for the same FDF. This is true at the end of TSL and at earlier stages, i.e. fractions of TSL. The absolute value of TSL is immaterial for a given FDF. In the case of in-service inspection, the inspection interval is also given without dimensions as a fraction of TSL.

Only the influence of future scheduled inspections is treated. Updating based on actual inspection results is not included as the scope of work is inspection planning at the design stage. Results for some frequent cases occurring in practice are readily derived and presented.     

跨大芦线航道桥梁方案技术经济比选

该文从全线角度对跨度为100m左右的桥梁方案进行技术经济比选,提出：第一、连续梁有边跨,主桥面积大;第二、连续梁梁高大,同等纵坡条件下,全线桥梁面积大;第三、不同桥型相对于连续梁方案的技术经济指标临界点。可为不同桥梁方案比选提供参考。