aPLI冲击器动态标定方法研究

随着国内汽车安全领域的不断发展,汽车行人保护的概念逐渐被消费者了解,并受到了越来越多的关注,一种新型的aPLI冲击器开始参与试验评估。该冲击器与现有柔性腿型冲击器有较大区别,标定方法及评价区间也有不同之处,更高精确度的标定能够更好的反应冲击器的真实状况,但是国内使用该冲击器的经验不够丰富,本文通过拆解介绍了aPLI冲击器的结构,展示了其工作原理,并结合标准要求与试验室环境得出了一套基于现有条件对aPLI冲击器进行标定的实操方法,结合标定结果与参考标准确认试验的有效性,通过多次标定进行数据分析,对一些试验中的注意事项进行总结,为其他试验室开展该冲击器标定试验提供参考。     

面内流固冲击载荷下加筋板的动力响应

船舶在恶劣的海况下航行时,船舶结构遭到剧烈的波浪砰击作用,这种冲击载荷可能使船体结构发生屈曲而造成舰船结构总体承载能力的丧失,导致灾难性的后果。加筋板结构作为船舶结构的基本结构之一,研究其动力特性显得尤为重要。基于离散加筋板模型,对具有弹性约束边界的初缺陷矩形加筋板在面内流固冲击载荷下的动力响应问题进行了理论研究。取样条函数作为挠度试函数,运用加权残值法求得初缺陷加筋板动力响应的控制方程,采用四阶Runge—Kutta法求解该方程,并用Fortran语言编制了相应的计算程序。构造的B样条函数能适应板侧边上的任意弹性转动约束,讨论了初始几何缺陷、冲击载荷持续时间、加强筋及弹性约束的影响。结果表明,它们是影响加筋板动力特性的重要因素。适当增加弹性约束,减小初始几何缺陷及冲击载荷持续时间有利于提高加筋板的承载能力。     

基于蒙特卡洛法的抛锚撞击海管概率分析

针对船舶抛锚撞击海底管道事故频发,撞击概率计算过程较复杂且适用范围有限的问题,对现有方法进行改进,基于蒙特卡洛方法建立抛锚统计试验模型,对某一条件下船舶抛锚对海底管道的撞击概率进行计算,结果表明:对现有方法进行改进或利用蒙特卡洛方法能较好地反映船舶抛锚对海底管道的撞击概率变化特性,可应用于危险区域的抛锚预警和海上禁锚区的设置。     

耦合运动下液货舱晃荡压力预报研究

针对液货船舱晃荡载荷预报问题,进行了单自由度简谐运动激励下液舱模型试验,研究冲击压力特性,并选择70%H装载水平工况开展数值计算比较,结合试验结果得到计算预报的修正系数,同时用简单解耦方法根据单自由度修正系数对纵横摇耦合运动下的压力计算结果进行修正,所得结果可为晃荡载荷工程评估提供参考。     

超声冲击消除高强钢焊接残余应力的数值模拟研究

焊接残余应力会对结构的力学特性带来不利的影响,而超声冲击能较有效地消除大型焊接结构残余拉应力,起到大幅增加结构疲劳强度的作用。该文首先采用热弹塑性方法对超声冲击前的高强钢平板焊接残余应力进行分析,然后采用瞬态动力学方法对焊接残余应力的超声冲击消除进行三维仿真研究,最后对超声冲击前后残余应力的数值计算结果与试验结果进行对比分析研究。由分析结果可知:超声冲击前高强钢平板焊缝附近存在较大的残余拉应力,呈双峰分布;超声冲击后较大的残余拉应力转化为残余压应力;数值模拟结果与试验结果相一致。并且,平板厚度方向的应力经过超声冲击后表现为应力的均匀化。文中研究结果可为高强钢大型焊接结构超声冲击消除残余应力进行合理评估和后续进行相关力学特性研究提供理论基础和技术支撑。     

冲击载荷下弹性索波动行为试验装置设计

针对在冲击波作用下难以对弹性索波动行为进行试验研究且实际试验成本高等问题,提出一种冲击载荷下弹性索波动行为试验装置,装置由加速系统、钢索系统及测试系统组成。根据总体性能要求,探索波动行为特征,确定各部分组成的工作原理和详细构成（载荷和系统等多种参数可以调整）,设计相关性能试验验证方法。试验装置在设计的过程中涉及试验原理的选择、试验方法的实现,以及信号处理和图像处理等技术,可为研究钢索应力波行为提供试验基础平台,也可为钢索应力波相关工程应用领域提供技术参考。     

公路隧道环境影响评价中存在的问题与对策建议

公路隧道环境影响评价在预防和减缓隧道建设、运营对生态环境的影响上起着重要的作用.文章在对公路隧道环评实践过程中存在的现行法规难以完全满足环评需要、环评介入时间滞后以及其他一些环评技术问题进行分析讨论的基础上.提出了制定隧道环评专门法规、加强隧道环评监管和提高隧道环评人员素质的对策建议.     

A study of relationships between traffic noise and annoyance for different urban site typologies

The paper intends to analyse the different attitudes of residents in urban areas in regard to annoyance induced by traffic noise, account taken of the effects of the street configuration and of the presence of specific public transport modes in the definition of the dose-response curves.People’s annoyance was investigated through a campaign of noise and traffic measurements and an epidemiological survey, administered to a sample of 830 residents in the buildings close to the measurement points.An ordinal regression model taking into account environmental and urban characteristics was used to identify a dose-response relationship. The cumulative probabilities allowed to define two cut points on the dose-response curves (60 and 75 dB(A)), grouping people in three classes and making the representation of the dose-response relationships different from those traditionally defined that use only the percentage of highly annoyed people.The results show different people’s attitudes towards the annoyance in the urban sites while the dose-response relationship shows that the correlation between annoyance and noise is low. For the same value of day equivalent level, 10% more people are annoyed in L sections (broad streets) than in U sections (narrow streets). Furthermore, all the dose-response curves show a higher sensitivity of people living in L sections; this difference can be measured as a shift of about 4 dB(A). Noise levels are, arguably, a useful indicator, but they are not reliable enough to define the discomfort of the residents, while the site characteristics could shed light on annoyance variability.     

The impact of major road developments on the spheres of urban influence of Japanese cities

This study aims to measure the impact of major road developments on the spheres of urban influence of Japanese cities.First, the sphere of urban influence is defined by application of an individual behavior model. The model explains the number of trips to representative cities in regions from the residential place of each individual using the following factors; the attractiveness of cities, the travel time to cities and the individual's free time. Development of major roads shortens the travel time, and this causes the change in the sphere of urban influence. The model we propose has the structure to explain this phenomenon.Second, this method is applied to all of Japan where expressways are now being rapidly constructed and, how they change spheres of urban influence is explained. In the application, as a measure of attractiveness of cities, population, commercial and industrial activity, etc. are considered. From these points of view, the impacts of construction of expressways in Japan are estimated.     

An individual information system for visualizing the bus and subway network

The system described in this paper allows the user to visualize the Montreal transportation system. The user is provided with several different maps.

The complete subway network and all regular bus lines have been included. The subway network and the bus lines can be selectively displayed. The most attractive feature of this system is the possibility of obtaining all possible routes between two different places. The input is based on the menu technique.

The system can be easily adapted to other large urban transportation systems.