高锰钢爆炸加工硬化及其硬化机理

本文研究了爆炸加工后高锰钢的硬化效果及其硬化机理．结果表明，高锰钢经爆炸加工后表面硬度大幅度提高，硬化深度超过４０ｍｍ．但夏比冲击试验表明仍有较高的韧性，宏观残余变形很小．这些变化不是发生Ｍ体及ε相转变的结果，而是发生高密度位错、堆垛层错、大量的交叉滑移，晶粒的扭折，孪晶及Ａ体晶粒细化引起的．     

混凝土搅拌运输车主、副车架的设计

对混凝土搅拌运输车的主、副车架进行了定性和定量的受力分析,从中推导出主、副车架的简化强度计算方法和强度校核公式。并以SX5254GJBDM364混凝土搅拌运输车为例进行了实例分析和计算。     

调质C级钢铸钢材料的研制

通过合理配置铸钢材料的化学成分,并配合适当的热处理工艺,研制出了满足AAR-M-201和AAR-M-211标准要求的新型调质C级钢。同时研究了热处理工艺对调质C级钢的性能影响,测定了其低温韧性和耐磨性。     

桥式抓斗卸船机不同形式的比较

桥式抓斗卸船机主要有自行小车式和钢丝绳牵引小车式2种形式.钢丝绳牵引式又分为单索起升单索开闭单小车牵引式、主辅小车牵引式、机械差动四卷筒牵引式、电差动四卷筒牵引式等形式,它们各有优劣,主辅小车牵引式被证明是最可靠的形式.     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

铁路钢桁梁桥状态评估

以京广上行线洣河大桥为例介绍铁路钢桁梁桥的状态评估方法,为维修加固和更新改造提供依据。     

船舶主机冷却水系统的建模与节能型控制研究

在对船舶主机高温淡水冷却水系统的各主要器件建立各自的数学模型的基础上,对其整个系统建立了数学模型.然后以主机高温淡水冷却水系统作为研究对象,提出了在此系统中采用神经元自适应控制方式替代传统的PID(比例积分微分)控制方式进行水温调节,以达到改善控制并节约能源的目的.最后以仿真结果说明了神经元自适应控制方式具有良好的适应性与抗干扰性,它比PID控制方式更适用于主机冷却水温度调节系统.     

预制混凝土节段箱梁胶接拼装架设施工

广州轨道交通地铁四号线第7标段上部结构为预制混凝土节段箱梁,采用整孔拼装架设方案。介绍预制混凝土节段箱梁胶接拼装、整孔架设的施工方法,为今后类似工程的施工提供借鉴。     

重庆石板坡长江大桥复线桥总体设计

重庆石板坡长江大桥复线桥是主跨330 m的世界第一大跨径梁桥,大桥主跨跨中103m梁段采用了钢箱梁结构,这样有效地降低了主梁的弯矩和剪力,正是采取了这样的措施,才使得如此大跨径的桥梁在技术和造价上都切实可行。