大跨悬浇钢筋混凝土拱桥施工扣索力优化计算分析

为有效控制钢筋混凝土拱圈在悬臂浇筑过程中出现过大的拉应力,文中以某大跨悬浇钢筋混凝土拱桥为依托,提出一种扣索力优化计算方法。首先,基于“未知荷载系数法”获取拱圈最大悬臂状态扣索力初值;然后,开展正装分析并提取施工过程的索力、应力以及位移影响矩阵,基于优化原理并利用MATLAB软件对扣索力开展进一步优化。最后,分别基于影响线原理和无应力状态法原理确定拱圈合龙前扣索力最优拆除顺序和扣索补张拉值,确保拱圈受力合理、松索成拱后拱圈线形光滑圆顺。算例结果表明,扣索初拉力值较为均匀,所有索力值安全系数均大于2.5;拱圈松索成拱线形合理,未出现“马鞍形”;拱圈施工过程中截面拉应力均小于1.8 MPa,满足设计要求。     

纯电动卡车总装混线生产的工艺研究

纯电动卡车的产品特点与传统燃油卡车既有共性又存在差异,对比两种车型的底盘装配和调试工艺后,在传统燃油车总装配线的基础上设计了一套新能源的装配工艺流程,不仅提高总装配车间柔性化生产,还实现了纯电动卡车和燃油卡车的混线生产。     

Augmented Reality Vehicle system: Left-turn maneuver study

Augmented Reality “AR” is a promising paradigm that can offer users with real-time, high-quality visualization of a wide variety of information. In AR, virtual objects are added to the real-world view in real time. The AR technology can offer a very realistic environment for enhancing drivers’ performance on the road and testing drivers’ ability to react to different road design and traffic operations scenarios. This can be achieved by adding virtual objects (people, vehicles, hazards, and other objects) to the normal view while driving an actual vehicle in a real environment. This paper explores a new Augmented Reality Vehicle “ARV” system and attempts to apply this new concept to a selected traffic engineering application namely the left-turn maneuver at two-way stop-controlled “TWSC” intersection. This TWSC intersection experiment, in addition to testing the feasibility of the application, tries to quantify the size of gaps accepted by different driver’s characteristics (age and gender). The ARV system can be installed in any vehicle where the driver can see the surrounding environment through a Head Mounted Display “HMD” and virtual objects are generated through a computer and added to the scene. These different environments are generated using a well defined set of scenarios. The results from this study supported the feasibility and validity of the proposed ARV system and they showed promise for this system to be used in the field-testing for the safety and operation aspects of transportation research. Results of the left-turn maneuver study revealed that participants accepted gaps in the range of 4.0-9.0 s. This finding implies that all gaps below 4 s are rejected and all gaps above 9 s are likely to be accepted. The mean value of the left-turn time was 4.67 s which is a little bit higher than reported values in the literature (4.0-4.3 s). Older drivers were found to select larger gaps to make left turns than younger drivers. The conservative driving attitude of older drivers indicates the potential presence of reduced driving ability of elderly. Drivers’ characteristics (age and gender) did not significantly affect the left-turn time. Based on the survey questions that were handed to participants, most participants indicated good level of comfort with none or small level of risk while driving the vehicle with the ARV system. None of the participants felt any kind of motion sickness and the participants’ answers indicated a good visibility and realism of the scene with overall good system fidelity.     

光面爆破技术在城市地铁隧道施工中的应用

文章从光面爆破机理、光面爆破技术中各主要参数的确定,以及光面爆破在实际工程中的应用几个方面出发,以深圳地铁安-侨区间隧道硬岩段施工为例,研究分析了如何利用光面爆破技术来提高城市地铁浅埋暗挖法的光爆效果,特别是近距离穿越重要建(构)筑物时如何有效进行光面爆破。     

基于插补原理的船体复杂曲面加热线布置方法

船体曲面成形技术是船舶加工过程中重要的环节。如何更好更快实现船体复杂曲面加工,一致以来备受国内外学者的关注。本文借鉴插补原理,对传统船体复杂曲面加热线布置进行了优化设计,得到了圆弧形板、s形板、帆形板和马鞍板的加热线。采用COMSOL Multiphysics多物理场仿真软件,分析四种加热线下钢板变形情况,并通过实验检验了插补形式下的船体曲面成形效果。结果表明：(1)插补算法得到的船体曲面加热线路程比传统加热线路程节约75%以上。(2)对有限元计算位移进行曲面拟合,得到的预测模型与实际船体曲面基本一致。(3)实验了四种曲面加热线,并将有限元预测位移与实验进行对比,二者误差在6%以内,有限元计算与实验结果基本吻合。该方法降低加工时间,提高加工效率。     

离线船舶机电设备振动采集仪系统设计

设计了离线振动采集仪的硬件系统,通过对传感器电源模块的进行了节电控制设计,优化振动信号的采集策略和采集节奏,提出了振动信号数据处理和存储方法,实现了无人关注下自主对船舶机电设备振动信号连续近百天的采集任务。应用结果显示,采集仪系统结果准确可靠,实现了全工况的实船振动数据的采集设备。     

锚链预张力对FDPSO运动响应的影响

作为一种综合性浮式平台,浮式钻井生产储油船简称FDPSO,具备石油钻探、生产、储备等功能,是在浮式生产储油船的基础上发展而来.FDPSO主要工作于海况比较恶劣的深水海域,因而如何准确预报FDPSO的运动响应和锚链的预张力非常必要.本文基于时域耦合方法对FDPSO运动响应和锚链的预张力进行预报,在此基础上将数值结果与试验结果进行对比以验证理论计算的可靠性.通过改变锚链线的预张力来研究预张力对FDPSO运动响应的影响.文中提供了运动响应的时历曲线和响应谱,并对比分析其中的异同,结果表明锚链预张力对纵荡、横荡和横摇运动的响应影响比较大.     

三个膀胱癌细胞系侵袭相关分子的研究

目的　探讨膀胱癌细胞侵袭能力不同的机制。方法　取来源于同一膀胱癌组织的三个细胞系 ,检测其软琼脂克隆形成率及基底膜黏附能力。采用荧光偏振法测定细胞膜脂流动性 ,免疫组化法和流式细胞术分析E cadherin、基质金属蛋白酶 2 (matrixmetalloproteinases 2 ,MMP 2 )和CD44的表达。 结果　BLX和BLZ细胞的软琼脂克隆形成率高于BLS细胞 ,同时基底膜黏附能力均大于BLS细胞 ,BLX和BLZ细胞的膜脂流动性小于BLS细胞 ,BLX、BLZ和BLS细胞在MMP 2表达上无差异 ,BLS和BLZ的E cadherin表达强于BLX细胞。流式细胞仪分析BLS细胞CD44阳性率高于BLX和BLZ细胞。结论　膀胱癌细胞系在侵袭能力上的差异可能与其膜脂流动性及CD44的表达不同有关     

一种新的任意四边形窗口线裁剪算法

线裁剪技术在计算机图形处理中占有重要地位,是计算机图形学中许多重要问题的基础,关于线段的二维裁剪有许多成熟的算法.在分析已有的二维裁剪缺点的基础上,提出了一个新算法.该算法通过将凹四边形区域转为凸四边形区域,并将该区域分为四个区,对线段进行裁剪,实验结果表明该裁剪方法高效、准确.     

基于S注入法的自闭贯通线路故障定位系统

将S注入法和无线传输节点相结合，利用传感器网络的自组网功能以及高容错性构建了无线节点通信网络．提出了采用传感器网络技术的铁路自闭贯通线故障定位系统．该系统由信号注入装置、无线节点、开关站无线处理单元和智能故障信息处理系统构成．通过无线节点检测注入信号．智能故障信息处理系统接收无线节点传来的检测结果，并判断故障位置．注入信号的电源为恒流源，频率范围为220～320Hz．设计了并列方式和交错方式两种检测节点的布置方案．这两种方式均能满足信息传输可靠性的要求，但并列方式的系统可靠性比交错方式提高了2倍．该系统定位精度可根据需要调整．